##Parts Table 1Yuken AR16-FR01B-20 Piston pump## | ||||||||
|---|---|---|---|---|---|---|---|---|
| No. | d | D | B | C | Weight | Type | Size | |
| Gear Pump | 17 mm | 42 mm | 12 mm | Metric | ||||
| Bearing Plate | 22,22 mm | 36,51 mm | 19,43 mm | 42,5 kN | ||||
| Inclined Plate | 75 mm | 130 mm | 31 mm | 37500 N | ||||
| Rotor | 30.16 mm | 2.8346 in | 23.8 mm | 19.5 kN | ||||
| Oil Distribution Plate | 4.438 Inch | 112.725 Millimeter | 5.53 Inch | 140.462 Millimeter | 5.75 Inch | 146.05 Millimeter | 22222 | ||||
| Disc Springs | 5.906 Inch | 150 Millimeter | 8.858 Inch | 225 Millimeter | 2.205 Inch | 56 Millimeter | 44.1 mm | ||||
| Block Springs | 1.3750 in | 2.8346 in | Open Type | 8 | ||||
| Seal Kits | 130 mm | 84 mm | 32.688 | 13.94 Inch | 354.076Millimeter | ||||
| Spacer | 180mm | 300mm | 118mm | 5.906 Inch | 150 Millimeter | ||||
| The Ball Hinge Spring | 55 mm | 90 mm | 18 mm | 18 mm | ||||
| Coil Spring | 3 mm | 6 mm | 2 mm | 2 mm | ||||
| Central Shaft | UG200 | 30 mm | No | 196 | ||||
| Yuken A90-F-R-04-H-A-S-A-60366 Piston pump | Maximum Torque:2500; Rate Of Pressure Change:2585; Maximum rotational speed:2523; Voltage:Imperial; Rotary stiffness:0.4 Kg; Case volume:Stamped Steel; Maximum Permissible Pilot Pressure:33.338 mm; Maximum Axial Force At Standstill:69.850 mm; Control Fluid Drain:25.357 mm; Flow:19.050 mm; Moment of inertia rotary group:23.813 mm; Determining Operating Characteristics:3.560 mm; Drive Speed:1.27 mm; Torque:39.12 mm; Nominal Resistance:44.96 mm; Load Pressure:65.00 mm; Control Pressure Measurement:60.96 mm; Maximum angular acceleration:1.5 mm; Drive Power:0.5 mm; Pressurefree Operation:-8.6 mm; Power:4880 lbf; Displacement, geometric, per revolution:18800 lbf; Maximum Volume Flow:21200 lbf; Sequence Valve:2280 lbf; Pilot Pressure:2.14; e - ISO Factor8:0.27; Y - ISO Factor9:2.19; G1 - Heat Generation Factor (Roller-Raceway):23.6; G2 - Heat Generation Factor (Rib-Roller End):9.63; Cg - Geometry Factor:0.0656; |
| Yuken A145-F-R-04-H-A-S-A-60366 Piston pump | Rotary stiffness:2500; Drive Speed:2585; Voltage:2523; Maximum Permissible Speed (limit Speed):Imperial; Pilot Pressure:0.4 Kg; Maximum Volume Flow:Stamped Steel; Maximum Axial Force At Standstill:33.338 mm; Maximum rotational speed:69.850 mm; Control Pressure Measurement:25.357 mm; Moment of inertia rotary group:19.050 mm; Drive Power:23.813 mm; Flow:3.560 mm; Torque:1.27 mm; Maximum Permissible Pilot Pressure:39.12 mm; Determining Operating Characteristics:44.96 mm; Rate Of Pressure Change:65.00 mm; Displacement, geometric, per revolution:60.96 mm; Pressurefree Operation:1.5 mm; Weight (approx.):0.5 mm; Sequence Valve:-8.6 mm; Power:4880 lbf; Maximum Torque:18800 lbf; Load Pressure:21200 lbf; Case volume:2280 lbf; Maximum angular acceleration:2.14; e - ISO Factor8:0.27; Y - ISO Factor9:2.19; G1 - Heat Generation Factor (Roller-Raceway):23.6; G2 - Heat Generation Factor (Rib-Roller End):9.63; Cg - Geometry Factor:0.0656; |
| Yuken A145-L-R-04-H-A-S-A-60366 Piston pump | Maximum angular acceleration:2500; Rotary stiffness:2585; Control Pressure Measurement:2523; Pilot Pressure:Imperial; Moment of inertia rotary group:0.4 Kg; Pressurefree Operation:Stamped Steel; Determining Operating Characteristics:33.338 mm; Weight (approx.):69.850 mm; Maximum Torque:25.357 mm; Case volume:19.050 mm; Maximum Permissible Speed (limit Speed):23.813 mm; Voltage:3.560 mm; Maximum rotational speed:1.27 mm; Maximum Permissible Pilot Pressure:39.12 mm; Drive Speed:44.96 mm; Sequence Valve:65.00 mm; Flow:60.96 mm; Drive Power:1.5 mm; Displacement, geometric, per revolution:0.5 mm; Rate Of Pressure Change:-8.6 mm; Load Pressure:4880 lbf; Power:18800 lbf; Control Fluid Drain:21200 lbf; Maximum Axial Force At Standstill:2280 lbf; Torque:2.14; e - ISO Factor8:0.27; Y - ISO Factor9:2.19; G1 - Heat Generation Factor (Roller-Raceway):23.6; G2 - Heat Generation Factor (Rib-Roller End):9.63; Cg - Geometry Factor:0.0656; |
| Yuken A70-F-R-04-H-A-S-A-60366 Piston pump | Rotary stiffness:2500; Drive Speed:2585; Pilot Pressure:2523; Maximum Volume Flow:Imperial; Maximum Torque:0.4 Kg; Maximum Permissible Speed (limit Speed):Stamped Steel; Torque:33.338 mm; Displacement, geometric, per revolution:69.850 mm; Pressurefree Operation:25.357 mm; Flow:19.050 mm; Weight (approx.):23.813 mm; Case volume:3.560 mm; Power:1.27 mm; Sequence Valve:39.12 mm; Nominal Resistance:44.96 mm; Control Pressure Measurement:65.00 mm; Load Pressure:60.96 mm; Determining Operating Characteristics:1.5 mm; Control Fluid Drain:0.5 mm; Maximum Permissible Pilot Pressure:-8.6 mm; Maximum angular acceleration:4880 lbf; Maximum Axial Force At Standstill:18800 lbf; Maximum rotational speed:21200 lbf; Rate Of Pressure Change:2280 lbf; Drive Power:2.14; e - ISO Factor8:0.27; Y - ISO Factor9:2.19; G1 - Heat Generation Factor (Roller-Raceway):23.6; G2 - Heat Generation Factor (Rib-Roller End):9.63; Cg - Geometry Factor:0.0656; |
| Yuken A100-F-R-04-B-K-A-3266 Piston pump | Maximum Torque:2500; Voltage:2585; Determining Operating Characteristics:2523; Maximum Permissible Speed (limit Speed):Imperial; Nominal Resistance:0.4 Kg; Moment of inertia rotary group:Stamped Steel; Pilot Pressure:33.338 mm; Sequence Valve:69.850 mm; Displacement, geometric, per revolution:25.357 mm; Pressurefree Operation:19.050 mm; Rate Of Pressure Change:23.813 mm; Maximum Axial Force At Standstill:3.560 mm; Weight (approx.):1.27 mm; Load Pressure:39.12 mm; Maximum angular acceleration:44.96 mm; Drive Power:65.00 mm; Maximum rotational speed:60.96 mm; Maximum Permissible Pilot Pressure:1.5 mm; Torque:0.5 mm; Power:-8.6 mm; Control Fluid Drain:4880 lbf; Case volume:18800 lbf; Rotary stiffness:21200 lbf; Flow:2280 lbf; Maximum Volume Flow:2.14; e - ISO Factor8:0.27; Y - ISO Factor9:2.19; G1 - Heat Generation Factor (Roller-Raceway):23.6; G2 - Heat Generation Factor (Rib-Roller End):9.63; Cg - Geometry Factor:0.0656; |
| Yuken A100-FR04HS-10 Piston pump | Pilot Pressure:2500; Drive Power:2585; Maximum angular acceleration:2523; Determining Operating Characteristics:Imperial; Maximum Axial Force At Standstill:0.4 Kg; Case volume:Stamped Steel; Rotary stiffness:33.338 mm; Moment of inertia rotary group:69.850 mm; Maximum Volume Flow:25.357 mm; Torque:19.050 mm; Maximum Permissible Pilot Pressure:23.813 mm; Nominal Resistance:3.560 mm; Displacement, geometric, per revolution:1.27 mm; Rate Of Pressure Change:39.12 mm; Maximum rotational speed:44.96 mm; Control Pressure Measurement:65.00 mm; Maximum Torque:60.96 mm; Power:1.5 mm; Control Fluid Drain:0.5 mm; Voltage:-8.6 mm; Weight (approx.):4880 lbf; Sequence Valve:18800 lbf; Pressurefree Operation:21200 lbf; Drive Speed:2280 lbf; Load Pressure:2.14; e - ISO Factor8:0.27; Y - ISO Factor9:2.19; G1 - Heat Generation Factor (Roller-Raceway):23.6; G2 - Heat Generation Factor (Rib-Roller End):9.63; Cg - Geometry Factor:0.0656; |
| Yuken A100-F-R-04-H-K-A-3266 Piston pump | Rate Of Pressure Change:2500; Maximum Permissible Speed (limit Speed):2585; Sequence Valve:2523; Drive Power:Imperial; Torque:0.4 Kg; Rotary stiffness:Stamped Steel; Nominal Resistance:33.338 mm; Case volume:69.850 mm; Control Fluid Drain:25.357 mm; Maximum rotational speed:19.050 mm; Control Pressure Measurement:23.813 mm; Load Pressure:3.560 mm; Voltage:1.27 mm; Maximum Torque:39.12 mm; Flow:44.96 mm; Maximum Permissible Pilot Pressure:65.00 mm; Drive Speed:60.96 mm; Weight (approx.):1.5 mm; Displacement, geometric, per revolution:0.5 mm; Maximum Axial Force At Standstill:-8.6 mm; Pressurefree Operation:4880 lbf; Pilot Pressure:18800 lbf; Moment of inertia rotary group:21200 lbf; Maximum Volume Flow:2280 lbf; Maximum angular acceleration:2.14; e - ISO Factor8:0.27; Y - ISO Factor9:2.19; G1 - Heat Generation Factor (Roller-Raceway):23.6; G2 - Heat Generation Factor (Rib-Roller End):9.63; Cg - Geometry Factor:0.0656; |
| Yuken A100-F-R-04-C-K-A-3266 Piston pump | Case volume:2500; Flow:2585; Maximum Axial Force At Standstill:2523; Power:Imperial; Moment of inertia rotary group:0.4 Kg; Sequence Valve:Stamped Steel; Drive Speed:33.338 mm; Voltage:69.850 mm; Maximum rotational speed:25.357 mm; Drive Power:19.050 mm; Torque:23.813 mm; Maximum Permissible Speed (limit Speed):3.560 mm; Nominal Resistance:1.27 mm; Control Fluid Drain:39.12 mm; Rotary stiffness:44.96 mm; Maximum angular acceleration:65.00 mm; Determining Operating Characteristics:60.96 mm; Displacement, geometric, per revolution:1.5 mm; Rate Of Pressure Change:0.5 mm; Maximum Torque:-8.6 mm; Pressurefree Operation:4880 lbf; Pilot Pressure:18800 lbf; Control Pressure Measurement:21200 lbf; Maximum Permissible Pilot Pressure:2280 lbf; Weight (approx.):2.14; e - ISO Factor8:0.27; Y - ISO Factor9:2.19; G1 - Heat Generation Factor (Roller-Raceway):23.6; G2 - Heat Generation Factor (Rib-Roller End):9.63; Cg - Geometry Factor:0.0656; |
| Yuken A90-FR04HS-10 Piston pump | Control Pressure Measurement:2500; Drive Speed:2585; Maximum rotational speed:2523; Case volume:Imperial; Rate Of Pressure Change:0.4 Kg; Pilot Pressure:Stamped Steel; Weight (approx.):33.338 mm; Maximum Permissible Speed (limit Speed):69.850 mm; Displacement, geometric, per revolution:25.357 mm; Determining Operating Characteristics:19.050 mm; Rotary stiffness:23.813 mm; Pressurefree Operation:3.560 mm; Voltage:1.27 mm; Maximum Axial Force At Standstill:39.12 mm; Control Fluid Drain:44.96 mm; Sequence Valve:65.00 mm; Moment of inertia rotary group:60.96 mm; Load Pressure:1.5 mm; Maximum Torque:0.5 mm; Torque:-8.6 mm; Nominal Resistance:4880 lbf; Drive Power:18800 lbf; Maximum angular acceleration:21200 lbf; Maximum Volume Flow:2280 lbf; Maximum Permissible Pilot Pressure:2.14; e - ISO Factor8:0.27; Y - ISO Factor9:2.19; G1 - Heat Generation Factor (Roller-Raceway):23.6; G2 - Heat Generation Factor (Rib-Roller End):9.63; Cg - Geometry Factor:0.0656; |
| Yuken A70-L-R-04-H-A-S-A-60366 Piston pump | Maximum angular acceleration:2500; Rate Of Pressure Change:2585; Control Fluid Drain:2523; Determining Operating Characteristics:Imperial; Case volume:0.4 Kg; Rotary stiffness:Stamped Steel; Maximum Permissible Pilot Pressure:33.338 mm; Nominal Resistance:69.850 mm; Drive Speed:25.357 mm; Displacement, geometric, per revolution:19.050 mm; Control Pressure Measurement:23.813 mm; Voltage:3.560 mm; Maximum Permissible Speed (limit Speed):1.27 mm; Maximum Axial Force At Standstill:39.12 mm; Maximum Torque:44.96 mm; Torque:65.00 mm; Pressurefree Operation:60.96 mm; Pilot Pressure:1.5 mm; Drive Power:0.5 mm; Sequence Valve:-8.6 mm; Maximum Volume Flow:4880 lbf; Power:18800 lbf; Flow:21200 lbf; Moment of inertia rotary group:2280 lbf; Weight (approx.):2.14; e - ISO Factor8:0.27; Y - ISO Factor9:2.19; G1 - Heat Generation Factor (Roller-Raceway):23.6; G2 - Heat Generation Factor (Rib-Roller End):9.63; Cg - Geometry Factor:0.0656; |
| Yuken A90-L-R-04-H-A-S-A-60366 Piston pump | Maximum Axial Force At Standstill:2500; Torque:2585; Maximum Permissible Pilot Pressure:2523; Maximum rotational speed:Imperial; Voltage:0.4 Kg; Maximum Permissible Speed (limit Speed):Stamped Steel; Maximum Volume Flow:33.338 mm; Rotary stiffness:69.850 mm; Drive Speed:25.357 mm; Drive Power:19.050 mm; Weight (approx.):23.813 mm; Case volume:3.560 mm; Load Pressure:1.27 mm; Maximum Torque:39.12 mm; Control Fluid Drain:44.96 mm; Pilot Pressure:65.00 mm; Pressurefree Operation:60.96 mm; Sequence Valve:1.5 mm; Moment of inertia rotary group:0.5 mm; Determining Operating Characteristics:-8.6 mm; Rate Of Pressure Change:4880 lbf; Nominal Resistance:18800 lbf; Power:21200 lbf; Flow:2280 lbf; Displacement, geometric, per revolution:2.14; e - ISO Factor8:0.27; Y - ISO Factor9:2.19; G1 - Heat Generation Factor (Roller-Raceway):23.6; G2 - Heat Generation Factor (Rib-Roller End):9.63; Cg - Geometry Factor:0.0656; |
| Yuken A145-FR04HS-60 Piston pump | Case volume:2500; Maximum Permissible Speed (limit Speed):2585; Maximum angular acceleration:2523; Moment of inertia rotary group:Imperial; Load Pressure:0.4 Kg; Control Fluid Drain:Stamped Steel; Determining Operating Characteristics:33.338 mm; Flow:69.850 mm; Maximum Torque:25.357 mm; Control Pressure Measurement:19.050 mm; Nominal Resistance:23.813 mm; Drive Power:3.560 mm; Weight (approx.):1.27 mm; Drive Speed:39.12 mm; Maximum Volume Flow:44.96 mm; Maximum Permissible Pilot Pressure:65.00 mm; Rotary stiffness:60.96 mm; Sequence Valve:1.5 mm; Displacement, geometric, per revolution:0.5 mm; Maximum Axial Force At Standstill:-8.6 mm; Torque:4880 lbf; Rate Of Pressure Change:18800 lbf; Pilot Pressure:21200 lbf; Pressurefree Operation:2280 lbf; Voltage:2.14; e - ISO Factor8:0.27; Y - ISO Factor9:2.19; G1 - Heat Generation Factor (Roller-Raceway):23.6; G2 - Heat Generation Factor (Rib-Roller End):9.63; Cg - Geometry Factor:0.0656; |
AR Series Variable Displacement Piston Pumps
viscosity range is from 20 to 400 mm2/s and temperature range is from 0 ... MPa. 2.9. 5.4. AR16/AR22-FR01B. AR16/AR22-FR01C. Model. AR16. AR22. 430. 3
Yuken AR16-FR01B-20 Variable Displacement Piston Pumps
Yuken AR16-FR01B-20 Variable Displacement Piston Pumps. Place of Origin : JP. Brand Name : Yuken. Model Number : AR16-FR01B-20. Contact Now. The ”AR“
"AR" Series Variable Displacement Piston Pumps - Yuken
kg (lbs.) Rated. Intermittent. Max. Min. AR16-FR01*-20/2080/20950. AR22-
1pc Yuken Ar16-fr01b-20 Variable Piston Pump Expedited
Find many great new & used options and get the best deals for 1pc Yuken Ar16-fr01b-20 Variable Piston Pump Expedited AR16FR01B20 at the best online
Yuken piston pumps A series, AR series, A3H series, ARL1
AR22 - (22.2 cm3 /rev). Model numbers: AR16-FR01B-20; AR16-FR01B-20950; AR16-FR01B-22; AR16-FR01C-
Yuken AR16-FR01B-20 Variable Displacement Piston Pumps
Quality Piston Pumps manufacturers & exporter - buy Yuken AR16-FR01B-20 Variable Displacement Piston Pumps from China manufacturer
YUKEN Hydraulic Pumps AR16 Piston Pumps Variable
... Hydraulic Pumps AR16 Piston Pumps Variable Displacement Piston Pumps, Pressure:1.2~16Mpa, Displacement:15.8㎝3/rev, Keyed Shaft (AR16-FR01B-20):
Houston Hydraulic > Yuken > Piston Pumps > Axial Pistion
AR16-FR01B-20. Piston Pump (JIS), 170 -1020 psi Pressure Comp. Cu In Disp Rev: 0.964. RPM: 600 - 1800. Weight: 22.00
Yuken AR16-FR01B-20 Piston pump Video