| Rexroth ZDB10VP2-4X/200 PRESSURE RELIEF VALVE | Control Fluid Drain:Cast iron; Maximum angular acceleration:55.562 mm; Torque:111.6 mm; Determining Operating Characteristics:118 mm; Displacement, geometric, per revolution:127 mm; Weight (approx.):47 mm; Maximum Torque:16 mm; Maximum Permissible Speed (limit Speed):3.2 mm; Power:29.5 mm; Pressurefree Operation:55.6 mm; Sequence Valve:9 mm; Voltage:184 mm; Control Pressure Measurement:216 mm; Flow:127 mm; Pilot Pressure:18 mm; Rotary stiffness:33.4 mm; Moment of inertia rotary group:64.4 mm; Maximum Axial Force At Standstill:1/4-28 UNF; Nominal Resistance:31.5 mm; Load Pressure:45 °; Maximum rotational speed:6.5 mm; Drive Power:7 mm; Maximum Volume Flow:1/4-28 SAE-LT; Maximum Permissible Pilot Pressure:154 mm; Rate Of Pressure Change:18 mm; N4:2 mm; Basic dynamic load rating C:43.6 kN; Basic static load rating C0:29 kN; Fatigue load limit Pu:1.25 kN; Limiting speed:3600 r/min; Mass bearing unit:2.7 kg; Thread grub screw G2:3/8-24 UNF; Hexagonal key size for grub screw N:4.763 mm; Recommended tightening torque for grub screw:16.5 N·m; Recommended diameter for attachment bolts, mm G:16 mm; Recommended diameter for attachment bolts, inch G:0.625 in; |
| Rexroth ZDB10VP2-4X/100V PRESSURE RELIEF VALVE | Maximum Volume Flow:Cast iron; Maximum Permissible Speed (limit Speed):55.562 mm; Sequence Valve:111.6 mm; Load Pressure:118 mm; Control Pressure Measurement:127 mm; Rate Of Pressure Change:47 mm; Maximum Permissible Pilot Pressure:16 mm; Maximum Torque:3.2 mm; Rotary stiffness:29.5 mm; Moment of inertia rotary group:55.6 mm; Weight (approx.):9 mm; Displacement, geometric, per revolution:184 mm; Pilot Pressure:216 mm; Maximum rotational speed:127 mm; Determining Operating Characteristics:18 mm; Nominal Resistance:33.4 mm; Control Fluid Drain:64.4 mm; Power:1/4-28 UNF; Pressurefree Operation:31.5 mm; Drive Speed:45 °; Maximum angular acceleration:6.5 mm; Drive Power:7 mm; Torque:1/4-28 SAE-LT; Voltage:154 mm; Maximum Axial Force At Standstill:18 mm; N4:2 mm; Basic dynamic load rating C:43.6 kN; Basic static load rating C0:29 kN; Fatigue load limit Pu:1.25 kN; Limiting speed:3600 r/min; Mass bearing unit:2.7 kg; Thread grub screw G2:3/8-24 UNF; Hexagonal key size for grub screw N:4.763 mm; Recommended tightening torque for grub screw:16.5 N·m; Recommended diameter for attachment bolts, mm G:16 mm; Recommended diameter for attachment bolts, inch G:0.625 in; |
| Rexroth ZDB10VP2-4X/200 PRESSURE RELIEF VALVE | Voltage:Cast iron; Maximum Torque:55.562 mm; Torque:111.6 mm; Maximum Permissible Speed (limit Speed):118 mm; Maximum Axial Force At Standstill:127 mm; Nominal Resistance:47 mm; Power:16 mm; Rate Of Pressure Change:3.2 mm; Maximum angular acceleration:29.5 mm; Control Pressure Measurement:55.6 mm; Weight (approx.):9 mm; Maximum rotational speed:184 mm; Maximum Volume Flow:216 mm; Maximum Permissible Pilot Pressure:127 mm; Drive Speed:18 mm; Load Pressure:33.4 mm; Control Fluid Drain:64.4 mm; Pilot Pressure:1/4-28 UNF; Determining Operating Characteristics:31.5 mm; Sequence Valve:45 °; Pressurefree Operation:6.5 mm; Displacement, geometric, per revolution:7 mm; Flow:1/4-28 SAE-LT; Case volume:154 mm; Drive Power:18 mm; N4:2 mm; Basic dynamic load rating C:43.6 kN; Basic static load rating C0:29 kN; Fatigue load limit Pu:1.25 kN; Limiting speed:3600 r/min; Mass bearing unit:2.7 kg; Thread grub screw G2:3/8-24 UNF; Hexagonal key size for grub screw N:4.763 mm; Recommended tightening torque for grub screw:16.5 N·m; Recommended diameter for attachment bolts, mm G:16 mm; Recommended diameter for attachment bolts, inch G:0.625 in; |
| Rexroth ZDB10VPA2-4X/50V PRESSURE RELIEF VALVE | Power:Cast iron; Torque:55.562 mm; Control Fluid Drain:111.6 mm; Drive Power:118 mm; Voltage:127 mm; Rotary stiffness:47 mm; Case volume:16 mm; Flow:3.2 mm; Maximum Permissible Pilot Pressure:29.5 mm; Rate Of Pressure Change:55.6 mm; Maximum angular acceleration:9 mm; Maximum Axial Force At Standstill:184 mm; Displacement, geometric, per revolution:216 mm; Pilot Pressure:127 mm; Pressurefree Operation:18 mm; Maximum rotational speed:33.4 mm; Maximum Torque:64.4 mm; Maximum Volume Flow:1/4-28 UNF; Control Pressure Measurement:31.5 mm; Load Pressure:45 °; Determining Operating Characteristics:6.5 mm; Drive Speed:7 mm; Sequence Valve:1/4-28 SAE-LT; Weight (approx.):154 mm; Moment of inertia rotary group:18 mm; N4:2 mm; Basic dynamic load rating C:43.6 kN; Basic static load rating C0:29 kN; Fatigue load limit Pu:1.25 kN; Limiting speed:3600 r/min; Mass bearing unit:2.7 kg; Thread grub screw G2:3/8-24 UNF; Hexagonal key size for grub screw N:4.763 mm; Recommended tightening torque for grub screw:16.5 N·m; Recommended diameter for attachment bolts, mm G:16 mm; Recommended diameter for attachment bolts, inch G:0.625 in; |
| Rexroth ZDB10VP2-4X/315 PRESSURE RELIEF VALVE | Sequence Valve:Cast iron; Drive Speed:55.562 mm; Pressurefree Operation:111.6 mm; Drive Power:118 mm; Maximum Permissible Pilot Pressure:127 mm; Rotary stiffness:47 mm; Moment of inertia rotary group:16 mm; Maximum rotational speed:3.2 mm; Maximum Axial Force At Standstill:29.5 mm; Load Pressure:55.6 mm; Maximum Permissible Speed (limit Speed):9 mm; Maximum Volume Flow:184 mm; Rate Of Pressure Change:216 mm; Determining Operating Characteristics:127 mm; Case volume:18 mm; Weight (approx.):33.4 mm; Nominal Resistance:64.4 mm; Flow:1/4-28 UNF; Power:31.5 mm; Control Pressure Measurement:45 °; Torque:6.5 mm; Maximum Torque:7 mm; Control Fluid Drain:1/4-28 SAE-LT; Maximum angular acceleration:154 mm; Displacement, geometric, per revolution:18 mm; N4:2 mm; Basic dynamic load rating C:43.6 kN; Basic static load rating C0:29 kN; Fatigue load limit Pu:1.25 kN; Limiting speed:3600 r/min; Mass bearing unit:2.7 kg; Thread grub screw G2:3/8-24 UNF; Hexagonal key size for grub screw N:4.763 mm; Recommended tightening torque for grub screw:16.5 N·m; Recommended diameter for attachment bolts, mm G:16 mm; Recommended diameter for attachment bolts, inch G:0.625 in; |
| Rexroth ZDB10VP2-4X/315 PRESSURE RELIEF VALVE | Control Pressure Measurement:Cast iron; Maximum Volume Flow:55.562 mm; Pressurefree Operation:111.6 mm; Power:118 mm; Load Pressure:127 mm; Weight (approx.):47 mm; Case volume:16 mm; Drive Power:3.2 mm; Maximum Torque:29.5 mm; Maximum Permissible Speed (limit Speed):55.6 mm; Maximum rotational speed:9 mm; Torque:184 mm; Rate Of Pressure Change:216 mm; Nominal Resistance:127 mm; Displacement, geometric, per revolution:18 mm; Maximum angular acceleration:33.4 mm; Moment of inertia rotary group:64.4 mm; Drive Speed:1/4-28 UNF; Maximum Axial Force At Standstill:31.5 mm; Determining Operating Characteristics:45 °; Control Fluid Drain:6.5 mm; Flow:7 mm; Voltage:1/4-28 SAE-LT; Sequence Valve:154 mm; Rotary stiffness:18 mm; N4:2 mm; Basic dynamic load rating C:43.6 kN; Basic static load rating C0:29 kN; Fatigue load limit Pu:1.25 kN; Limiting speed:3600 r/min; Mass bearing unit:2.7 kg; Thread grub screw G2:3/8-24 UNF; Hexagonal key size for grub screw N:4.763 mm; Recommended tightening torque for grub screw:16.5 N·m; Recommended diameter for attachment bolts, mm G:16 mm; Recommended diameter for attachment bolts, inch G:0.625 in; |
| Rexroth ZDB10VP2-4X/315V PRESSURE RELIEF VALVE | Rate Of Pressure Change:Cast iron; Control Pressure Measurement:55.562 mm; Power:111.6 mm; Maximum Volume Flow:118 mm; Weight (approx.):127 mm; Maximum Axial Force At Standstill:47 mm; Pressurefree Operation:16 mm; Maximum Torque:3.2 mm; Maximum angular acceleration:29.5 mm; Maximum Permissible Pilot Pressure:55.6 mm; Drive Power:9 mm; Determining Operating Characteristics:184 mm; Sequence Valve:216 mm; Voltage:127 mm; Case volume:18 mm; Control Fluid Drain:33.4 mm; Displacement, geometric, per revolution:64.4 mm; Moment of inertia rotary group:1/4-28 UNF; Load Pressure:31.5 mm; Torque:45 °; Nominal Resistance:6.5 mm; Drive Speed:7 mm; Maximum rotational speed:1/4-28 SAE-LT; Pilot Pressure:154 mm; Flow:18 mm; N4:2 mm; Basic dynamic load rating C:43.6 kN; Basic static load rating C0:29 kN; Fatigue load limit Pu:1.25 kN; Limiting speed:3600 r/min; Mass bearing unit:2.7 kg; Thread grub screw G2:3/8-24 UNF; Hexagonal key size for grub screw N:4.763 mm; Recommended tightening torque for grub screw:16.5 N·m; Recommended diameter for attachment bolts, mm G:16 mm; Recommended diameter for attachment bolts, inch G:0.625 in; |
| Rexroth ZDB10VA-2-4X/50V PRESSURE RELIEF VALVE | Rotary stiffness:Cast iron; Maximum Permissible Pilot Pressure:55.562 mm; Drive Speed:111.6 mm; Flow:118 mm; Displacement, geometric, per revolution:127 mm; Maximum Volume Flow:47 mm; Sequence Valve:16 mm; Weight (approx.):3.2 mm; Power:29.5 mm; Control Pressure Measurement:55.6 mm; Voltage:9 mm; Control Fluid Drain:184 mm; Torque:216 mm; Maximum angular acceleration:127 mm; Pressurefree Operation:18 mm; Rate Of Pressure Change:33.4 mm; Maximum rotational speed:64.4 mm; Load Pressure:1/4-28 UNF; Pilot Pressure:31.5 mm; Determining Operating Characteristics:45 °; Drive Power:6.5 mm; Maximum Axial Force At Standstill:7 mm; Nominal Resistance:1/4-28 SAE-LT; Maximum Permissible Speed (limit Speed):154 mm; Maximum Torque:18 mm; N4:2 mm; Basic dynamic load rating C:43.6 kN; Basic static load rating C0:29 kN; Fatigue load limit Pu:1.25 kN; Limiting speed:3600 r/min; Mass bearing unit:2.7 kg; Thread grub screw G2:3/8-24 UNF; Hexagonal key size for grub screw N:4.763 mm; Recommended tightening torque for grub screw:16.5 N·m; Recommended diameter for attachment bolts, mm G:16 mm; Recommended diameter for attachment bolts, inch G:0.625 in; |
| Rexroth ZDB10VP2-4X/100V PRESSURE RELIEF VALVE | Maximum Permissible Pilot Pressure:Cast iron; Determining Operating Characteristics:55.562 mm; Displacement, geometric, per revolution:111.6 mm; Maximum Permissible Speed (limit Speed):118 mm; Weight (approx.):127 mm; Drive Power:47 mm; Drive Speed:16 mm; Pilot Pressure:3.2 mm; Torque:29.5 mm; Nominal Resistance:55.6 mm; Maximum Volume Flow:9 mm; Maximum Torque:184 mm; Maximum Axial Force At Standstill:216 mm; Control Pressure Measurement:127 mm; Rotary stiffness:18 mm; Power:33.4 mm; Voltage:64.4 mm; Sequence Valve:1/4-28 UNF; Control Fluid Drain:31.5 mm; Maximum rotational speed:45 °; Rate Of Pressure Change:6.5 mm; Maximum angular acceleration:7 mm; Moment of inertia rotary group:1/4-28 SAE-LT; Pressurefree Operation:154 mm; Flow:18 mm; N4:2 mm; Basic dynamic load rating C:43.6 kN; Basic static load rating C0:29 kN; Fatigue load limit Pu:1.25 kN; Limiting speed:3600 r/min; Mass bearing unit:2.7 kg; Thread grub screw G2:3/8-24 UNF; Hexagonal key size for grub screw N:4.763 mm; Recommended tightening torque for grub screw:16.5 N·m; Recommended diameter for attachment bolts, mm G:16 mm; Recommended diameter for attachment bolts, inch G:0.625 in; |
| Rexroth ZDB10VP2-4X/315V PRESSURE RELIEF VALVE | Determining Operating Characteristics:Cast iron; Flow:55.562 mm; Drive Speed:111.6 mm; Moment of inertia rotary group:118 mm; Pressurefree Operation:127 mm; Maximum Permissible Speed (limit Speed):47 mm; Drive Power:16 mm; Maximum Volume Flow:3.2 mm; Torque:29.5 mm; Control Pressure Measurement:55.6 mm; Load Pressure:9 mm; Sequence Valve:184 mm; Case volume:216 mm; Nominal Resistance:127 mm; Maximum Axial Force At Standstill:18 mm; Maximum Permissible Pilot Pressure:33.4 mm; Voltage:64.4 mm; Displacement, geometric, per revolution:1/4-28 UNF; Maximum angular acceleration:31.5 mm; Rotary stiffness:45 °; Rate Of Pressure Change:6.5 mm; Pilot Pressure:7 mm; Maximum rotational speed:1/4-28 SAE-LT; Control Fluid Drain:154 mm; Weight (approx.):18 mm; N4:2 mm; Basic dynamic load rating C:43.6 kN; Basic static load rating C0:29 kN; Fatigue load limit Pu:1.25 kN; Limiting speed:3600 r/min; Mass bearing unit:2.7 kg; Thread grub screw G2:3/8-24 UNF; Hexagonal key size for grub screw N:4.763 mm; Recommended tightening torque for grub screw:16.5 N·m; Recommended diameter for attachment bolts, mm G:16 mm; Recommended diameter for attachment bolts, inch G:0.625 in; |
| Rexroth ZDB10VP2-4X/200V PRESSURE RELIEF VALVE | Maximum Torque:Cast iron; Control Pressure Measurement:55.562 mm; Case volume:111.6 mm; Drive Power:118 mm; Torque:127 mm; Maximum Volume Flow:47 mm; Load Pressure:16 mm; Sequence Valve:3.2 mm; Maximum Permissible Speed (limit Speed):29.5 mm; Flow:55.6 mm; Moment of inertia rotary group:9 mm; Maximum Axial Force At Standstill:184 mm; Pilot Pressure:216 mm; Determining Operating Characteristics:127 mm; Maximum angular acceleration:18 mm; Maximum rotational speed:33.4 mm; Power:64.4 mm; Control Fluid Drain:1/4-28 UNF; Nominal Resistance:31.5 mm; Pressurefree Operation:45 °; Rotary stiffness:6.5 mm; Drive Speed:7 mm; Displacement, geometric, per revolution:1/4-28 SAE-LT; Voltage:154 mm; Rate Of Pressure Change:18 mm; N4:2 mm; Basic dynamic load rating C:43.6 kN; Basic static load rating C0:29 kN; Fatigue load limit Pu:1.25 kN; Limiting speed:3600 r/min; Mass bearing unit:2.7 kg; Thread grub screw G2:3/8-24 UNF; Hexagonal key size for grub screw N:4.763 mm; Recommended tightening torque for grub screw:16.5 N·m; Recommended diameter for attachment bolts, mm G:16 mm; Recommended diameter for attachment bolts, inch G:0.625 in; |
| Rexroth ZDB10VP2-4X/200V PRESSURE RELIEF VALVE | Nominal Resistance:Cast iron; Torque:55.562 mm; Moment of inertia rotary group:111.6 mm; Voltage:118 mm; Control Fluid Drain:127 mm; Rotary stiffness:47 mm; Control Pressure Measurement:16 mm; Determining Operating Characteristics:3.2 mm; Sequence Valve:29.5 mm; Case volume:55.6 mm; Displacement, geometric, per revolution:9 mm; Maximum Volume Flow:184 mm; Pilot Pressure:216 mm; Maximum Torque:127 mm; Maximum angular acceleration:18 mm; Drive Power:33.4 mm; Maximum Axial Force At Standstill:64.4 mm; Pressurefree Operation:1/4-28 UNF; Flow:31.5 mm; Maximum Permissible Speed (limit Speed):45 °; Rate Of Pressure Change:6.5 mm; Weight (approx.):7 mm; Drive Speed:1/4-28 SAE-LT; Maximum rotational speed:154 mm; Maximum Permissible Pilot Pressure:18 mm; N4:2 mm; Basic dynamic load rating C:43.6 kN; Basic static load rating C0:29 kN; Fatigue load limit Pu:1.25 kN; Limiting speed:3600 r/min; Mass bearing unit:2.7 kg; Thread grub screw G2:3/8-24 UNF; Hexagonal key size for grub screw N:4.763 mm; Recommended tightening torque for grub screw:16.5 N·m; Recommended diameter for attachment bolts, mm G:16 mm; Recommended diameter for attachment bolts, inch G:0.625 in; |