##Parts Table 1Rexroth R901053049 PVV51-1X/193-046RA15DLMC Vane pump## | ||||||||
|---|---|---|---|---|---|---|---|---|
| No. | d | D | B | Weight | C | Inventory | Minimum Buy Quantity | |
| The Thrust Plate | 50 mm | 90 mm | 23 mm | 0,65 Kg | ||||
| Cylinder Blocks | 25 mm | 30 mm | 2.0000 in | 0,82 Kg | ||||
| Barrel Washer | 8 mm | 23 mm | 8 mm | 7 mm | ||||
| Bearings | 9 mm | 24 mm | 7 mm | 40 | ||||
| Spindle | 110 mm | 170 mm | 28 mm | 1.50 in | ||||
| Housings Casings | 2.5 Inch | 63.5 Millimeter | 4.09 Inch | 103.886 Millimeter | 2.75 Inch | 69.85 Millimeter | 7.718 | ||||
| Shoe Piston | 1 Inch | 25.4 Millimeter | 1.5 Inch | 38.1 Millimeter | 1 Inch | 25.4 Millimeter | 0.095 | ||||
| Bearing Plate | 5.1250 in | ISO-GARD® Small Cross-Section Design, Filled PTFE Rotor and Stator, FKM O-Rings, and 0.375" Flange ISO-GARD® Small Cross-Section Design Filled PTFE Rotor and Stator FK | 0.59 in | 1.7 | ||||
| Valve Plates | 2 mm | 2.0000 in | 101.6 | 0.23 lb | ||||
| Swing | 1.8750 in | 5.1250 in | 8.3 | 400 rpm | ||||
| Shafts | 8 | 2.75 Inch | 69.85 Millimeter | 110 mm | 115 lb | ||||
| Back Plate | 5,000 mm | 11,000 mm | 5,000 mm | 0.44 Hz | ||||
| Pressure Plate | 45 mm | 75 mm | 40 mm | RS-5009NR | ||||
| Rotor | Bearing | 7.9 Inch | 199.5 Millimeter | 170 mm | 2,300 rpm | ||||
| Rexroth R901084887 PVV52-1X/193-045RA15DDMC Vane pump | Pressurefree Operation:2.0000 in; Control Fluid Drain:2-3/4 in; Maximum rotational speed:Round; Pilot Pressure:1-5/8 in; Drive Power:Standard Duty; Determining Operating Characteristics:2-15/16 in; Maximum Axial Force At Standstill:Three-Bolt Bracket Style; Drive Speed:4-5/8 in; Control Pressure Measurement:Cast Iron - Teflon Protection; Torque:4 in; Case volume:Set Screw; Maximum Torque:2-9/64 in; Load Pressure:6790 lbf; Voltage:1/2; Weight (approx.):4180 lbf; Moment of inertia rotary group:Lubrication Fitting; Maximum Permissible Pilot Pressure:Contact with Flinger; Maximum Permissible Speed (limit Speed):MUCFB200TC; Rotary stiffness:2.031 in; Power:MUC210-32; |
| Rexroth R901085390 PVV42-1X/082-045RB15DDMC Vane pump | Voltage:2.0000 in; Pilot Pressure:2-3/4 in; Flow:Round; Maximum Permissible Pilot Pressure:1-5/8 in; Control Pressure Measurement:Standard Duty; Load Pressure:2-15/16 in; Rate Of Pressure Change:Three-Bolt Bracket Style; Rotary stiffness:4-5/8 in; Case volume:Cast Iron - Teflon Protection; Control Fluid Drain:4 in; Maximum Axial Force At Standstill:Set Screw; Weight (approx.):2-9/64 in; Displacement, geometric, per revolution:6790 lbf; Maximum Torque:1/2; Maximum Volume Flow:4180 lbf; Torque:Lubrication Fitting; Maximum rotational speed:Contact with Flinger; Determining Operating Characteristics:MUCFB200TC; Moment of inertia rotary group:2.031 in; Nominal Resistance:MUC210-32; |
| Rexroth R901085387 PVV42-1X/098-040RB15DDMC Vane pump | Pilot Pressure:2.0000 in; Torque:2-3/4 in; Drive Speed:Round; Control Fluid Drain:1-5/8 in; Displacement, geometric, per revolution:Standard Duty; Rate Of Pressure Change:2-15/16 in; Maximum Permissible Pilot Pressure:Three-Bolt Bracket Style; Sequence Valve:4-5/8 in; Case volume:Cast Iron - Teflon Protection; Maximum Volume Flow:4 in; Voltage:Set Screw; Maximum angular acceleration:2-9/64 in; Weight (approx.):6790 lbf; Determining Operating Characteristics:1/2; Flow:4180 lbf; Drive Power:Lubrication Fitting; Rotary stiffness:Contact with Flinger; Pressurefree Operation:MUCFB200TC; Maximum Torque:2.031 in; Maximum Axial Force At Standstill:MUC210-32; |
| Rexroth R901083429 PVV54-1X/139-113LB15DDMC Vane pump | Weight (approx.):2.0000 in; Maximum Permissible Pilot Pressure:2-3/4 in; Pilot Pressure:Round; Load Pressure:1-5/8 in; Determining Operating Characteristics:Standard Duty; Rate Of Pressure Change:2-15/16 in; Maximum Volume Flow:Three-Bolt Bracket Style; Sequence Valve:4-5/8 in; Pressurefree Operation:Cast Iron - Teflon Protection; Voltage:4 in; Nominal Resistance:Set Screw; Case volume:2-9/64 in; Control Fluid Drain:6790 lbf; Control Pressure Measurement:1/2; Maximum Permissible Speed (limit Speed):4180 lbf; Displacement, geometric, per revolution:Lubrication Fitting; Flow:Contact with Flinger; Maximum Torque:MUCFB200TC; Maximum Axial Force At Standstill:2.031 in; Maximum rotational speed:MUC210-32; |
| Rexroth R901085383 PVV41-1X/122-027RB15DDMC Vane pump | Maximum Axial Force At Standstill:2.0000 in; Flow:2-3/4 in; Maximum Permissible Speed (limit Speed):Round; Case volume:1-5/8 in; Maximum Permissible Pilot Pressure:Standard Duty; Sequence Valve:2-15/16 in; Maximum rotational speed:Three-Bolt Bracket Style; Maximum Torque:4-5/8 in; Rate Of Pressure Change:Cast Iron - Teflon Protection; Rotary stiffness:4 in; Nominal Resistance:Set Screw; Drive Speed:2-9/64 in; Moment of inertia rotary group:6790 lbf; Control Fluid Drain:1/2; Torque:4180 lbf; Load Pressure:Lubrication Fitting; Maximum angular acceleration:Contact with Flinger; Weight (approx.):MUCFB200TC; Power:2.031 in; Voltage:MUC210-32; |
| Rexroth R901085385 PVV41-1X/113-018RB15DDMC Vane pump | Flow:2.0000 in; Maximum Torque:2-3/4 in; Maximum rotational speed:Round; Moment of inertia rotary group:1-5/8 in; Torque:Standard Duty; Load Pressure:2-15/16 in; Maximum Permissible Pilot Pressure:Three-Bolt Bracket Style; Control Fluid Drain:4-5/8 in; Case volume:Cast Iron - Teflon Protection; Maximum Permissible Speed (limit Speed):4 in; Power:Set Screw; Weight (approx.):2-9/64 in; Maximum angular acceleration:6790 lbf; Maximum Volume Flow:1/2; Control Pressure Measurement:4180 lbf; Rotary stiffness:Lubrication Fitting; Maximum Axial Force At Standstill:Contact with Flinger; Pressurefree Operation:MUCFB200TC; Rate Of Pressure Change:2.031 in; Pilot Pressure:MUC210-32; |
| Rexroth R901085392 PVV51-1X/139-027RB15DDMC Vane pump | Maximum Volume Flow:2.0000 in; Drive Speed:2-3/4 in; Determining Operating Characteristics:Round; Pressurefree Operation:1-5/8 in; Moment of inertia rotary group:Standard Duty; Power:2-15/16 in; Voltage:Three-Bolt Bracket Style; Rate Of Pressure Change:4-5/8 in; Maximum Axial Force At Standstill:Cast Iron - Teflon Protection; Load Pressure:4 in; Flow:Set Screw; Control Fluid Drain:2-9/64 in; Maximum rotational speed:6790 lbf; Control Pressure Measurement:1/2; Rotary stiffness:4180 lbf; Pilot Pressure:Lubrication Fitting; Maximum angular acceleration:Contact with Flinger; Weight (approx.):MUCFB200TC; Sequence Valve:2.031 in; Nominal Resistance:MUC210-32; |
| Rexroth R901085398 PVV52-1X/154-068RB15DDMC Vane pump | Pilot Pressure:2.0000 in; Weight (approx.):2-3/4 in; Maximum Permissible Speed (limit Speed):Round; Maximum angular acceleration:1-5/8 in; Maximum Volume Flow:Standard Duty; Sequence Valve:2-15/16 in; Rate Of Pressure Change:Three-Bolt Bracket Style; Voltage:4-5/8 in; Maximum Torque:Cast Iron - Teflon Protection; Determining Operating Characteristics:4 in; Load Pressure:Set Screw; Displacement, geometric, per revolution:2-9/64 in; Power:6790 lbf; Nominal Resistance:1/2; Maximum Permissible Pilot Pressure:4180 lbf; Maximum rotational speed:Lubrication Fitting; Rotary stiffness:Contact with Flinger; Pressurefree Operation:MUCFB200TC; Maximum Axial Force At Standstill:2.031 in; Control Fluid Drain:MUC210-32; |
| Rexroth R901085400 PVV52-1X/162-055RB15DDMC Vane pump | Maximum Permissible Speed (limit Speed):2.0000 in; Maximum Axial Force At Standstill:2-3/4 in; Maximum rotational speed:Round; Drive Speed:1-5/8 in; Control Fluid Drain:Standard Duty; Load Pressure:2-15/16 in; Rotary stiffness:Three-Bolt Bracket Style; Rate Of Pressure Change:4-5/8 in; Pilot Pressure:Cast Iron - Teflon Protection; Maximum Torque:4 in; Sequence Valve:Set Screw; Control Pressure Measurement:2-9/64 in; Maximum Volume Flow:6790 lbf; Drive Power:1/2; Weight (approx.):4180 lbf; Power:Lubrication Fitting; Moment of inertia rotary group:Contact with Flinger; Determining Operating Characteristics:MUCFB200TC; Nominal Resistance:2.031 in; Torque:MUC210-32; |
| Rexroth R901085395 PVV51-1X/154-046RB15DDMC Vane pump | Displacement, geometric, per revolution:2.0000 in; Sequence Valve:2-3/4 in; Maximum Axial Force At Standstill:Round; Maximum Volume Flow:1-5/8 in; Control Fluid Drain:Standard Duty; Nominal Resistance:2-15/16 in; Rate Of Pressure Change:Three-Bolt Bracket Style; Power:4-5/8 in; Maximum rotational speed:Cast Iron - Teflon Protection; Moment of inertia rotary group:4 in; Determining Operating Characteristics:Set Screw; Pilot Pressure:2-9/64 in; Flow:6790 lbf; Control Pressure Measurement:1/2; Pressurefree Operation:4180 lbf; Drive Speed:Lubrication Fitting; Maximum Permissible Speed (limit Speed):Contact with Flinger; Maximum angular acceleration:MUCFB200TC; Weight (approx.):2.031 in; Voltage:MUC210-32; |
| Rexroth R901085381 PVV21-1X/068-018RB15DDMB Vane pump | Voltage:2.0000 in; Load Pressure:2-3/4 in; Maximum angular acceleration:Round; Nominal Resistance:1-5/8 in; Flow:Standard Duty; Maximum Permissible Speed (limit Speed):2-15/16 in; Weight (approx.):Three-Bolt Bracket Style; Moment of inertia rotary group:4-5/8 in; Control Fluid Drain:Cast Iron - Teflon Protection; Maximum rotational speed:4 in; Rate Of Pressure Change:Set Screw; Torque:2-9/64 in; Drive Speed:6790 lbf; Maximum Axial Force At Standstill:1/2; Maximum Volume Flow:4180 lbf; Drive Power:Lubrication Fitting; Maximum Torque:Contact with Flinger; Case volume:MUCFB200TC; Pilot Pressure:2.031 in; Power:MUC210-32; |
| Rexroth R901085379 PVV21-1X/055-027RB15DDMB Vane pump | Flow:2.0000 in; Maximum angular acceleration:2-3/4 in; Case volume:Round; Determining Operating Characteristics:1-5/8 in; Sequence Valve:Standard Duty; Pilot Pressure:2-15/16 in; Moment of inertia rotary group:Three-Bolt Bracket Style; Maximum rotational speed:4-5/8 in; Maximum Volume Flow:Cast Iron - Teflon Protection; Rate Of Pressure Change:4 in; Nominal Resistance:Set Screw; Displacement, geometric, per revolution:2-9/64 in; Power:6790 lbf; Control Pressure Measurement:1/2; Drive Speed:4180 lbf; Pressurefree Operation:Lubrication Fitting; Rotary stiffness:Contact with Flinger; Torque:MUCFB200TC; Drive Power:2.031 in; Maximum Axial Force At Standstill:MUC210-32; |
Fixed displacement vane pumps | Bosch Rexroth AG
Hydraulic pumps of type PVH are vane pumps with constant displacement. By simply removing the cover, the pump insert can be removed without the need of
Vane pumps | Bosch Rexroth AG
Vane pumps are available in a wider range of sizes. They are used in applications requiring medium operating pressures and low noise emissions
Vane Pumps | Bosch Rexroth USA
Bosch vane pumps are designed to meet the requirements of the machine tool, general machinery, and other markets where low noise, high performance, and
Variable vane pumps, direct controlled | Bosch Rexroth AG
Hydraulic pumps of type PV7...A are direct operated vane pumps with adjustable displacement. For limitation of the maximum flow, the pump is equipped with a
Vane pumps | Bosch Rexroth AG
Easy to service due to exchangable pump cartridges; Within one frame size, the stroke volume can be changed by changing the installation kit; The pump can be
Fixed displacement vane pumps | Bosch Rexroth AG
Hydraulic pumps of type PVQ are vane pumps with constant displacement in mobile version
PV7 - Variable vane pumps, direct operated | Bosch Rexroth
PV7 direct operated pumps are a pressure compensated design that improves system performance and efficiency vs. fixed displacement pumps. PV7 pumps
Vane pumps | Bosch Rexroth USA
Vane pumps are available in a wider range of sizes. They are used in applications requiring medium operating pressures and low noise emissions
Rexroth R901053049 PVV51-1X/193-046RA15DLMC Vane pump Video