##Parts Table 1Rexroth R901083429 PVV54-1X/139-113LB15DDMC Vane pump## | ||||||||
|---|---|---|---|---|---|---|---|---|
| No. | d | Weight | B | Inventory | D | Minimum Buy Quantity | Type | |
| Socket Bolt | 6 mm | 0,0013 Kg | 8 mm | 0.0 | ||||
| Press Pin | 57.15 mm | 3.78 kg | 53.7 mm | 3.1250 in | ||||
| Friction Plate | 22.22 mm | 0.39 kg | 21.4 mm | 8.7 mm | ||||
| Swash Plate | 13 Days or more | 0.178 | US212-36G2T04 | 0.0 | ||||
| Push Rod | 27 mm | - | FL212N- | 0.0 | ||||
| Rotor | 3.346 Inch | 85 Millimeter | 4.15 | 3.78 kg | 0.0 | ||||
| Skeleton Oil Seal | 13.386 Inch | 340 Millimeter | 100.25 | 5.236 Inch | 133 Millimeter | 0.0 | ||||
| The Thrust Plate | Triple Lip with Flinger | - | 0,1 mm | 0.0 | ||||
| Gear Pump | 3.0000 in | From only the shaft end | 3-1/2 in | 85MM Bore; 180MM Outside Diameter; 41MM Outer Race Width; Open; Ball Bearing; ABEC 1 | ISO P0; No Filling Slot; Yes Snap Ring; No Internal Special Features; C0-Medium Internal Clearance; Steel Cage | ||||
| Coil Spring | 180 mm | -20 °C | 27 mm | 75 | ||||
| Swing | 480 | M180x3 | 310 | From only the shaft end | ||||
| Seal Kits | 3.7 Nm | 8 Days | From only the shaft end | 6200 | ||||
| Block Cylinder | 95 | 76 mm | Open | Cast Iron | ||||
| Cylinder | 104 | Two-Bolt Base | 12.0000 in | 450 | ||||
| Rexroth R901084887 PVV52-1X/193-045RA15DDMC Vane pump | Nominal Resistance:Bearings; Determining Operating Characteristics:0.0; Rate Of Pressure Change:NTN; Pressurefree Operation:N/A; Case volume:0.589; Maximum Permissible Pilot Pressure:B04334; |
| Rexroth R901085398 PVV52-1X/154-068RB15DDMC Vane pump | Nominal Resistance:Bearings; Drive Power:0.0; Moment of inertia rotary group:NTN; Pressurefree Operation:N/A; Determining Operating Characteristics:0.589; Maximum Volume Flow:B04334; |
| Rexroth R901085392 PVV51-1X/139-027RB15DDMC Vane pump | Control Pressure Measurement:Bearings; Maximum Axial Force At Standstill:0.0; Rotary stiffness:NTN; Flow:N/A; Case volume:0.589; Moment of inertia rotary group:B04334; |
| Rexroth R901085387 PVV42-1X/098-040RB15DDMC Vane pump | Maximum Torque:Bearings; Sequence Valve:0.0; Drive Power:NTN; Maximum rotational speed:N/A; Flow:0.589; Load Pressure:B04334; |
| Rexroth R901085390 PVV42-1X/082-045RB15DDMC Vane pump | Maximum Permissible Speed (limit Speed):Bearings; Weight (approx.):0.0; Pressurefree Operation:NTN; Determining Operating Characteristics:N/A; Maximum Axial Force At Standstill:0.589; Maximum Torque:B04334; |
| Rexroth R901083429 PVV54-1X/139-113LB15DDMC Vane pump | Moment of inertia rotary group:Bearings; Voltage:0.0; Maximum Permissible Pilot Pressure:NTN; Displacement, geometric, per revolution:N/A; Pilot Pressure:0.589; Maximum Torque:B04334; |
| Rexroth R901085395 PVV51-1X/154-046RB15DDMC Vane pump | Nominal Resistance:Bearings; Sequence Valve:0.0; Moment of inertia rotary group:NTN; Drive Speed:N/A; Maximum angular acceleration:0.589; Pressurefree Operation:B04334; |
| Rexroth R901085379 PVV21-1X/055-027RB15DDMB Vane pump | Control Pressure Measurement:Bearings; Drive Power:0.0; Sequence Valve:NTN; Maximum Torque:N/A; Rate Of Pressure Change:0.589; Case volume:B04334; |
| Rexroth R901085383 PVV41-1X/122-027RB15DDMC Vane pump | Control Fluid Drain:Bearings; Control Pressure Measurement:0.0; Maximum Torque:NTN; Maximum Permissible Pilot Pressure:N/A; Determining Operating Characteristics:0.589; Rotary stiffness:B04334; |
| Rexroth R901085381 PVV21-1X/068-018RB15DDMB Vane pump | Moment of inertia rotary group:Bearings; Maximum Volume Flow:0.0; Nominal Resistance:NTN; Displacement, geometric, per revolution:N/A; Flow:0.589; Torque:B04334; |
| Rexroth R901085385 PVV41-1X/113-018RB15DDMC Vane pump | Torque:Bearings; Maximum Volume Flow:0.0; Drive Power:NTN; Pressurefree Operation:N/A; Maximum angular acceleration:0.589; Maximum Permissible Pilot Pressure:B04334; |
| Rexroth R901085400 PVV52-1X/162-055RB15DDMC Vane pump | Maximum rotational speed:Bearings; Control Pressure Measurement:0.0; Load Pressure:NTN; Torque:N/A; Maximum Permissible Pilot Pressure:0.589; Case volume:B04334; |
Vane pumps | Bosch Rexroth AG
Easy to service due to exchangable pump cartridges; Within one frame size, the stroke volume can be changed by changing the installation kit; The pump can be
Vane pumps | Bosch Rexroth USA
Vane pumps are available in a wider range of sizes. They are used in applications requiring medium operating pressures and low noise emissions
Variable vane pumps, direct controlled | Bosch Rexroth AG
Hydraulic pumps of type PV7...A are direct operated vane pumps with adjustable displacement. For limitation of the maximum flow, the pump is equipped with a
PV7 - Variable vane pumps, direct operated | Bosch Rexroth
PV7 direct operated pumps are a pressure compensated design that improves system performance and efficiency vs. fixed displacement pumps. PV7 pumps
Fixed displacement vane pumps | Bosch Rexroth AG
Hydraulic pumps of type PVH are vane pumps with constant displacement. By simply removing the cover, the pump insert can be removed without the need of
Vane pumps | Bosch Rexroth AG
Vane pumps are available in a wider range of sizes. They are used in applications requiring medium operating pressures and low noise emissions
Fixed displacement vane pumps | Bosch Rexroth AG
Hydraulic pumps of type PVQ are vane pumps with constant displacement in mobile version
Vane Pumps | Bosch Rexroth USA
Bosch vane pumps are designed to meet the requirements of the machine tool, general machinery, and other markets where low noise, high performance, and
Rexroth R901083429 PVV54-1X/139-113LB15DDMC Vane pump Video