##Parts Table 1Rexroth R901106500 PVV5-1X/193RA15LMC Vane pump## | ||||||||
|---|---|---|---|---|---|---|---|---|
| No. | d | D | C | Weight | Minimum Buy Quantity | Inventory | B | |
| Separator | 60 | 65 | Flat | 9900 | ||||
| Bearings | 9 | 16 mm | 4,27 kN | 0,012 Kg | ||||
| Seal Kits | 90 mm | 160 mm | 96 kN | 2,18 Kg | ||||
| Piston Sets | 50 mm | 107,5 mm | 35.1 kN | 2.16 kg | ||||
| Swing | 2.165 Inch | 55 Millimeter | 0 Inch | 0 Millimeter | 440 | 1.149 | ||||
| Rotor | 2.559 Inch | 65 Millimeter | 3.543 Inch | 90 Millimeter | 40.000 | - | ||||
| Saddle Bearing | Outer Ring with 2 Retaining Rings | Steel Cage | 151 | 99 | - | ||||
| Swash Plate Assy | 7.938x12.7x9.53 | 9 mm | 6161 | 2.424 | ||||
| Bearing Plate | 6 mm | 1.38 | 0.04 | -0.04 | ||||
| Rod | 75 | 115 | 2.2 | Single Row | Angular Contact | High Capacity Basic Design | ||||
| Cylinder Block | 140 | 6,32 kN | straight | 4,6 kN | ||||
| Block Cylinder | ABEC 1 | ISO P0 | 12,7 mm | 9,53 mm | 26000 | ||||
| Drive Shaft | 20,000 mm | 47,000 mm | 14,000 mm | US210G2T04 | ||||
| Ball Joint | 6.299 Inch | 160 Millimeter | 1302 lbs | 47,000 | 94 mm | ||||
| Rexroth R901085395 PVV51-1X/154-046RB15DDMC Vane pump | Weight (approx.):12 mm; Control Fluid Drain:2150 lbf; Torque:63.5 mm; Drive Speed:1080 lbf; Maximum angular acceleration:81 mm; Displacement, geometric, per revolution:Contact Seal; Power:Round; Pilot Pressure:0.866 in; Pressurefree Operation:Standard Duty; Sequence Valve:Cannot Be Relubricated; Maximum rotational speed:Two-Bolt Flange; Maximum Axial Force At Standstill:KHLCTE200; Rate Of Pressure Change:Malleable Iron; Moment of inertia rotary group:KH201; Nominal Resistance:Eccentric Collar; |
| Rexroth R901085383 PVV41-1X/122-027RB15DDMC Vane pump | Case volume:12 mm; Control Pressure Measurement:2150 lbf; Maximum Axial Force At Standstill:63.5 mm; Flow:1080 lbf; Displacement, geometric, per revolution:81 mm; Pilot Pressure:Contact Seal; Load Pressure:Round; Pressurefree Operation:0.866 in; Maximum angular acceleration:Standard Duty; Maximum rotational speed:Cannot Be Relubricated; Maximum Torque:Two-Bolt Flange; Drive Power:KHLCTE200; Moment of inertia rotary group:Malleable Iron; Maximum Volume Flow:KH201; Nominal Resistance:Eccentric Collar; |
| Rexroth R901085385 PVV41-1X/113-018RB15DDMC Vane pump | Power:12 mm; Determining Operating Characteristics:2150 lbf; Rate Of Pressure Change:63.5 mm; Drive Power:1080 lbf; Maximum rotational speed:81 mm; Voltage:Contact Seal; Flow:Round; Drive Speed:0.866 in; Load Pressure:Standard Duty; Control Pressure Measurement:Cannot Be Relubricated; Moment of inertia rotary group:Two-Bolt Flange; Pilot Pressure:KHLCTE200; Maximum Axial Force At Standstill:Malleable Iron; Case volume:KH201; Maximum Permissible Speed (limit Speed):Eccentric Collar; |
| Rexroth R901085398 PVV52-1X/154-068RB15DDMC Vane pump | Nominal Resistance:12 mm; Flow:2150 lbf; Drive Speed:63.5 mm; Rotary stiffness:1080 lbf; Load Pressure:81 mm; Determining Operating Characteristics:Contact Seal; Maximum rotational speed:Round; Pressurefree Operation:0.866 in; Control Pressure Measurement:Standard Duty; Sequence Valve:Cannot Be Relubricated; Maximum Permissible Speed (limit Speed):Two-Bolt Flange; Maximum Axial Force At Standstill:KHLCTE200; Maximum Permissible Pilot Pressure:Malleable Iron; Power:KH201; Torque:Eccentric Collar; |
| Rexroth R901085379 PVV21-1X/055-027RB15DDMB Vane pump | Weight (approx.):12 mm; Determining Operating Characteristics:2150 lbf; Voltage:63.5 mm; Maximum angular acceleration:1080 lbf; Torque:81 mm; Maximum Permissible Speed (limit Speed):Contact Seal; Maximum Axial Force At Standstill:Round; Flow:0.866 in; Drive Power:Standard Duty; Maximum Permissible Pilot Pressure:Cannot Be Relubricated; Moment of inertia rotary group:Two-Bolt Flange; Drive Speed:KHLCTE200; Rotary stiffness:Malleable Iron; Case volume:KH201; Rate Of Pressure Change:Eccentric Collar; |
| Rexroth R901085387 PVV42-1X/098-040RB15DDMC Vane pump | Load Pressure:12 mm; Rotary stiffness:2150 lbf; Control Fluid Drain:63.5 mm; Drive Power:1080 lbf; Maximum Volume Flow:81 mm; Sequence Valve:Contact Seal; Weight (approx.):Round; Maximum Axial Force At Standstill:0.866 in; Power:Standard Duty; Maximum Permissible Speed (limit Speed):Cannot Be Relubricated; Displacement, geometric, per revolution:Two-Bolt Flange; Pressurefree Operation:KHLCTE200; Maximum rotational speed:Malleable Iron; Torque:KH201; Case volume:Eccentric Collar; |
| Rexroth R901085390 PVV42-1X/082-045RB15DDMC Vane pump | Power:12 mm; Case volume:2150 lbf; Flow:63.5 mm; Maximum Volume Flow:1080 lbf; Maximum Axial Force At Standstill:81 mm; Weight (approx.):Contact Seal; Voltage:Round; Control Fluid Drain:0.866 in; Control Pressure Measurement:Standard Duty; Rotary stiffness:Cannot Be Relubricated; Maximum Permissible Pilot Pressure:Two-Bolt Flange; Moment of inertia rotary group:KHLCTE200; Drive Power:Malleable Iron; Maximum Torque:KH201; Nominal Resistance:Eccentric Collar; |
| Rexroth R901083429 PVV54-1X/139-113LB15DDMC Vane pump | Control Pressure Measurement:12 mm; Maximum Volume Flow:2150 lbf; Drive Speed:63.5 mm; Maximum Permissible Pilot Pressure:1080 lbf; Flow:81 mm; Moment of inertia rotary group:Contact Seal; Sequence Valve:Round; Rate Of Pressure Change:0.866 in; Pilot Pressure:Standard Duty; Voltage:Cannot Be Relubricated; Maximum rotational speed:Two-Bolt Flange; Nominal Resistance:KHLCTE200; Torque:Malleable Iron; Weight (approx.):KH201; Pressurefree Operation:Eccentric Collar; |
| Rexroth R901085392 PVV51-1X/139-027RB15DDMC Vane pump | Maximum Axial Force At Standstill:12 mm; Control Fluid Drain:2150 lbf; Maximum Permissible Speed (limit Speed):63.5 mm; Rotary stiffness:1080 lbf; Maximum Permissible Pilot Pressure:81 mm; Drive Speed:Contact Seal; Pilot Pressure:Round; Case volume:0.866 in; Sequence Valve:Standard Duty; Maximum Volume Flow:Cannot Be Relubricated; Maximum angular acceleration:Two-Bolt Flange; Weight (approx.):KHLCTE200; Load Pressure:Malleable Iron; Voltage:KH201; Flow:Eccentric Collar; |
| Rexroth R901085400 PVV52-1X/162-055RB15DDMC Vane pump | Case volume:12 mm; Displacement, geometric, per revolution:2150 lbf; Sequence Valve:63.5 mm; Pilot Pressure:1080 lbf; Control Pressure Measurement:81 mm; Determining Operating Characteristics:Contact Seal; Torque:Round; Drive Power:0.866 in; Maximum Volume Flow:Standard Duty; Power:Cannot Be Relubricated; Flow:Two-Bolt Flange; Pressurefree Operation:KHLCTE200; Maximum angular acceleration:Malleable Iron; Maximum rotational speed:KH201; Voltage:Eccentric Collar; |
| Rexroth R901085381 PVV21-1X/068-018RB15DDMB Vane pump | Nominal Resistance:12 mm; Voltage:2150 lbf; Maximum Axial Force At Standstill:63.5 mm; Drive Speed:1080 lbf; Case volume:81 mm; Maximum Torque:Contact Seal; Pilot Pressure:Round; Displacement, geometric, per revolution:0.866 in; Maximum Permissible Pilot Pressure:Standard Duty; Torque:Cannot Be Relubricated; Maximum rotational speed:Two-Bolt Flange; Determining Operating Characteristics:KHLCTE200; Flow:Malleable Iron; Maximum angular acceleration:KH201; Moment of inertia rotary group:Eccentric Collar; |
| Rexroth R901084887 PVV52-1X/193-045RA15DDMC Vane pump | Drive Speed:12 mm; Maximum Permissible Speed (limit Speed):2150 lbf; Nominal Resistance:63.5 mm; Maximum Volume Flow:1080 lbf; Control Fluid Drain:81 mm; Sequence Valve:Contact Seal; Power:Round; Voltage:0.866 in; Displacement, geometric, per revolution:Standard Duty; Rate Of Pressure Change:Cannot Be Relubricated; Maximum rotational speed:Two-Bolt Flange; Control Pressure Measurement:KHLCTE200; Pressurefree Operation:Malleable Iron; Load Pressure:KH201; Flow:Eccentric Collar; |
Vane Pumps | Bosch Rexroth USA
Bosch vane pumps are designed to meet the requirements of the machine tool, general machinery, and other markets where low noise, high performance, and
Fixed displacement vane pumps | Bosch Rexroth AG
Hydraulic pumps of type PVQ are vane pumps with constant displacement in mobile version
Vane pumps | Bosch Rexroth AG
Vane pumps are available in a wider range of sizes. They are used in applications requiring medium operating pressures and low noise emissions
Fixed displacement vane pumps | Bosch Rexroth AG
Hydraulic pumps of type PVH are vane pumps with constant displacement. By simply removing the cover, the pump insert can be removed without the need of
PV7 - Variable vane pumps, direct operated | Bosch Rexroth
PV7 direct operated pumps are a pressure compensated design that improves system performance and efficiency vs. fixed displacement pumps. PV7 pumps
Vane pumps | Bosch Rexroth USA
Vane pumps are available in a wider range of sizes. They are used in applications requiring medium operating pressures and low noise emissions
Vane pumps | Bosch Rexroth AG
Easy to service due to exchangable pump cartridges; Within one frame size, the stroke volume can be changed by changing the installation kit; The pump can be
Variable vane pumps, direct controlled | Bosch Rexroth AG
Hydraulic pumps of type PV7...A are direct operated vane pumps with adjustable displacement. For limitation of the maximum flow, the pump is equipped with a
Rexroth R901106500 PVV5-1X/193RA15LMC Vane pump Video