##Parts Table 1Rexroth PVQ51-1X/193-027RA15DDMC Vane pump## | ||||||||
|---|---|---|---|---|---|---|---|---|
| No. | d | D | Weight | C | B | Minimum Buy Quantity | Inventory | |
| Valve Plates | 70 mm | 110 mm | 1,09 Kg | 134 kN | ||||
| Pump Right Rotating Group | 150 mm | 320 mm | 50,2 Kg | 490 kN | ||||
| Seal Kits | 1.378 Inch | 35 Millimeter | 2.835 Inch | 72 Millimeter | 0.404 | Metric | ||||
| Shafts | 105 mm | 105 | - | 40 | ||||
| Press Pin | 45.0 | 95,25 mm | - | 4400 r/min | ||||
| Rotor | 17 mm | 47 mm | 99.7 % | 1,16 | ||||
| Block Springs | 25 mm | 52 mm | 70x110x31 | 110 mm | ||||
| Cylinder | 5 mm | 6.55 kN | 2.835 Inch | 72 Millimeter | 4400 | ||||
| The Ball Hinge Spring | 31.75 mm | 95,25 mm | 78,5 mm | 22,225 mm | ||||
| Bushing Spring | 99 mm | 5 mm | 1.09 | 1200 | ||||
| Rexroth R901085383 PVV41-1X/122-027RB15DDMC Vane pump | Maximum Volume Flow:1.3125 in; Sequence Valve:2 in; Maximum rotational speed:Round; Drive Power:1-1/4 in; Maximum Permissible Speed (limit Speed):Standard Duty; Torque:2-3/8 in; Moment of inertia rotary group:Three-Bolt Bracket Style; Voltage:3-3/4 in; Power:Cast Iron; Displacement, geometric, per revolution:3-1/4 in; Weight (approx.):Set Screw; Flow:1-53/64 in; Pilot Pressure:5820 lbf; Maximum Permissible Pilot Pressure:1/2; Maximum Axial Force At Standstill:3460 lbf; Pressurefree Operation:Lubrication Fitting; Rate Of Pressure Change:Contact with Flinger; Drive Speed:UCFB200C4HR5; Load Pressure:1.689 in; Control Fluid Drain:UC207-21C4HR5; |
| Rexroth R901085379 PVV21-1X/055-027RB15DDMB Vane pump | Maximum Permissible Pilot Pressure:1.3125 in; Maximum Torque:2 in; Maximum Axial Force At Standstill:Round; Control Fluid Drain:1-1/4 in; Drive Speed:Standard Duty; Moment of inertia rotary group:2-3/8 in; Displacement, geometric, per revolution:Three-Bolt Bracket Style; Flow:3-3/4 in; Weight (approx.):Cast Iron; Nominal Resistance:3-1/4 in; Maximum rotational speed:Set Screw; Rotary stiffness:1-53/64 in; Drive Power:5820 lbf; Determining Operating Characteristics:1/2; Maximum Permissible Speed (limit Speed):3460 lbf; Pressurefree Operation:Lubrication Fitting; Power:Contact with Flinger; Sequence Valve:UCFB200C4HR5; Maximum Volume Flow:1.689 in; Load Pressure:UC207-21C4HR5; |
| Rexroth R901083429 PVV54-1X/139-113LB15DDMC Vane pump | Control Fluid Drain:1.3125 in; Voltage:2 in; Displacement, geometric, per revolution:Round; Weight (approx.):1-1/4 in; Drive Power:Standard Duty; Case volume:2-3/8 in; Pressurefree Operation:Three-Bolt Bracket Style; Flow:3-3/4 in; Maximum Permissible Pilot Pressure:Cast Iron; Maximum Axial Force At Standstill:3-1/4 in; Power:Set Screw; Rotary stiffness:1-53/64 in; Moment of inertia rotary group:5820 lbf; Rate Of Pressure Change:1/2; Nominal Resistance:3460 lbf; Maximum angular acceleration:Lubrication Fitting; Maximum Volume Flow:Contact with Flinger; Maximum Permissible Speed (limit Speed):UCFB200C4HR5; Load Pressure:1.689 in; Pilot Pressure:UC207-21C4HR5; |
| Rexroth R901084887 PVV52-1X/193-045RA15DDMC Vane pump | Sequence Valve:1.3125 in; Rotary stiffness:2 in; Control Pressure Measurement:Round; Drive Power:1-1/4 in; Maximum rotational speed:Standard Duty; Power:2-3/8 in; Maximum Axial Force At Standstill:Three-Bolt Bracket Style; Drive Speed:3-3/4 in; Rate Of Pressure Change:Cast Iron; Weight (approx.):3-1/4 in; Displacement, geometric, per revolution:Set Screw; Pressurefree Operation:1-53/64 in; Control Fluid Drain:5820 lbf; Case volume:1/2; Moment of inertia rotary group:3460 lbf; Pilot Pressure:Lubrication Fitting; Flow:Contact with Flinger; Nominal Resistance:UCFB200C4HR5; Voltage:1.689 in; Determining Operating Characteristics:UC207-21C4HR5; |
| Rexroth R901085381 PVV21-1X/068-018RB15DDMB Vane pump | Flow:1.3125 in; Weight (approx.):2 in; Pressurefree Operation:Round; Maximum rotational speed:1-1/4 in; Voltage:Standard Duty; Nominal Resistance:2-3/8 in; Power:Three-Bolt Bracket Style; Rotary stiffness:3-3/4 in; Maximum Torque:Cast Iron; Drive Speed:3-1/4 in; Maximum Permissible Speed (limit Speed):Set Screw; Maximum Axial Force At Standstill:1-53/64 in; Maximum Permissible Pilot Pressure:5820 lbf; Moment of inertia rotary group:1/2; Torque:3460 lbf; Pilot Pressure:Lubrication Fitting; Sequence Valve:Contact with Flinger; Displacement, geometric, per revolution:UCFB200C4HR5; Rate Of Pressure Change:1.689 in; Determining Operating Characteristics:UC207-21C4HR5; |
| Rexroth R901085400 PVV52-1X/162-055RB15DDMC Vane pump | Load Pressure:1.3125 in; Nominal Resistance:2 in; Maximum Volume Flow:Round; Maximum Torque:1-1/4 in; Flow:Standard Duty; Control Pressure Measurement:2-3/8 in; Maximum Permissible Speed (limit Speed):Three-Bolt Bracket Style; Sequence Valve:3-3/4 in; Pressurefree Operation:Cast Iron; Maximum angular acceleration:3-1/4 in; Voltage:Set Screw; Moment of inertia rotary group:1-53/64 in; Power:5820 lbf; Weight (approx.):1/2; Rate Of Pressure Change:3460 lbf; Drive Power:Lubrication Fitting; Rotary stiffness:Contact with Flinger; Pilot Pressure:UCFB200C4HR5; Torque:1.689 in; Control Fluid Drain:UC207-21C4HR5; |
| Rexroth R901085385 PVV41-1X/113-018RB15DDMC Vane pump | Drive Speed:1.3125 in; Maximum Permissible Pilot Pressure:2 in; Displacement, geometric, per revolution:Round; Load Pressure:1-1/4 in; Case volume:Standard Duty; Maximum Torque:2-3/8 in; Pressurefree Operation:Three-Bolt Bracket Style; Control Fluid Drain:3-3/4 in; Power:Cast Iron; Moment of inertia rotary group:3-1/4 in; Rotary stiffness:Set Screw; Drive Power:1-53/64 in; Maximum Permissible Speed (limit Speed):5820 lbf; Weight (approx.):1/2; Torque:3460 lbf; Determining Operating Characteristics:Lubrication Fitting; Sequence Valve:Contact with Flinger; Nominal Resistance:UCFB200C4HR5; Maximum angular acceleration:1.689 in; Rate Of Pressure Change:UC207-21C4HR5; |
| Rexroth R901085398 PVV52-1X/154-068RB15DDMC Vane pump | Pressurefree Operation:1.3125 in; Pilot Pressure:2 in; Maximum Permissible Speed (limit Speed):Round; Maximum Permissible Pilot Pressure:1-1/4 in; Voltage:Standard Duty; Maximum rotational speed:2-3/8 in; Flow:Three-Bolt Bracket Style; Load Pressure:3-3/4 in; Control Pressure Measurement:Cast Iron; Sequence Valve:3-1/4 in; Torque:Set Screw; Power:1-53/64 in; Control Fluid Drain:5820 lbf; Drive Speed:1/2; Determining Operating Characteristics:3460 lbf; Case volume:Lubrication Fitting; Rotary stiffness:Contact with Flinger; Maximum angular acceleration:UCFB200C4HR5; Moment of inertia rotary group:1.689 in; Drive Power:UC207-21C4HR5; |
| Rexroth R901085387 PVV42-1X/098-040RB15DDMC Vane pump | Flow:1.3125 in; Maximum Permissible Pilot Pressure:2 in; Determining Operating Characteristics:Round; Rate Of Pressure Change:1-1/4 in; Moment of inertia rotary group:Standard Duty; Control Fluid Drain:2-3/8 in; Control Pressure Measurement:Three-Bolt Bracket Style; Load Pressure:3-3/4 in; Maximum Axial Force At Standstill:Cast Iron; Power:3-1/4 in; Maximum Permissible Speed (limit Speed):Set Screw; Voltage:1-53/64 in; Pressurefree Operation:5820 lbf; Nominal Resistance:1/2; Maximum Volume Flow:3460 lbf; Maximum Torque:Lubrication Fitting; Rotary stiffness:Contact with Flinger; Maximum rotational speed:UCFB200C4HR5; Drive Speed:1.689 in; Sequence Valve:UC207-21C4HR5; |
| Rexroth R901085395 PVV51-1X/154-046RB15DDMC Vane pump | Weight (approx.):1.3125 in; Drive Speed:2 in; Maximum Volume Flow:Round; Determining Operating Characteristics:1-1/4 in; Case volume:Standard Duty; Maximum Permissible Speed (limit Speed):2-3/8 in; Maximum rotational speed:Three-Bolt Bracket Style; Flow:3-3/4 in; Sequence Valve:Cast Iron; Power:3-1/4 in; Torque:Set Screw; Moment of inertia rotary group:1-53/64 in; Maximum Permissible Pilot Pressure:5820 lbf; Rotary stiffness:1/2; Load Pressure:3460 lbf; Displacement, geometric, per revolution:Lubrication Fitting; Maximum Axial Force At Standstill:Contact with Flinger; Nominal Resistance:UCFB200C4HR5; Pressurefree Operation:1.689 in; Maximum Torque:UC207-21C4HR5; |
| Rexroth R901085392 PVV51-1X/139-027RB15DDMC Vane pump | Maximum Permissible Pilot Pressure:1.3125 in; Determining Operating Characteristics:2 in; Maximum rotational speed:Round; Pilot Pressure:1-1/4 in; Rotary stiffness:Standard Duty; Maximum Axial Force At Standstill:2-3/8 in; Drive Power:Three-Bolt Bracket Style; Moment of inertia rotary group:3-3/4 in; Rate Of Pressure Change:Cast Iron; Voltage:3-1/4 in; Weight (approx.):Set Screw; Torque:1-53/64 in; Displacement, geometric, per revolution:5820 lbf; Maximum Volume Flow:1/2; Load Pressure:3460 lbf; Maximum angular acceleration:Lubrication Fitting; Maximum Permissible Speed (limit Speed):Contact with Flinger; Control Pressure Measurement:UCFB200C4HR5; Flow:1.689 in; Sequence Valve:UC207-21C4HR5; |
| Rexroth R901085390 PVV42-1X/082-045RB15DDMC Vane pump | Rate Of Pressure Change:1.3125 in; Voltage:2 in; Maximum Permissible Speed (limit Speed):Round; Rotary stiffness:1-1/4 in; Control Pressure Measurement:Standard Duty; Maximum rotational speed:2-3/8 in; Pressurefree Operation:Three-Bolt Bracket Style; Sequence Valve:3-3/4 in; Maximum angular acceleration:Cast Iron; Moment of inertia rotary group:3-1/4 in; Power:Set Screw; Control Fluid Drain:1-53/64 in; Pilot Pressure:5820 lbf; Torque:1/2; Nominal Resistance:3460 lbf; Maximum Axial Force At Standstill:Lubrication Fitting; Drive Speed:Contact with Flinger; Case volume:UCFB200C4HR5; Maximum Volume Flow:1.689 in; Maximum Torque:UC207-21C4HR5; |
Vane pumps | Bosch Rexroth AG
Vane pumps are available in a wider range of sizes. They are used in applications requiring medium operating pressures and low noise emissions
Fixed displacement vane pumps | Bosch Rexroth AG
Hydraulic pumps of type PVH are vane pumps with constant displacement. By simply removing the cover, the pump insert can be removed without the need of
Vane Pumps | Bosch Rexroth USA
Bosch vane pumps are designed to meet the requirements of the machine tool, general machinery, and other markets where low noise, high performance, and
Vane pumps | Bosch Rexroth USA
Vane pumps are available in a wider range of sizes. They are used in applications requiring medium operating pressures and low noise emissions
PV7 - Variable vane pumps, direct operated | Bosch Rexroth
PV7 direct operated pumps are a pressure compensated design that improves system performance and efficiency vs. fixed displacement pumps. PV7 pumps
Fixed displacement vane pumps | Bosch Rexroth AG
Hydraulic pumps of type PVQ are vane pumps with constant displacement in mobile version
Vane pumps | Bosch Rexroth AG
Easy to service due to exchangable pump cartridges; Within one frame size, the stroke volume can be changed by changing the installation kit; The pump can be
Variable vane pumps, direct controlled | Bosch Rexroth AG
Hydraulic pumps of type PV7...A are direct operated vane pumps with adjustable displacement. For limitation of the maximum flow, the pump is equipped with a
Rexroth PVQ51-1X/193-027RA15DDMC Vane pump Video