##Parts Table 1Rexroth PVQ42-1X/098-045RA15DDMC Vane pump## | ||||||||
|---|---|---|---|---|---|---|---|---|
| No. | d | D | C | B | Weight | Categoria | Inventory | |
| Inclined Plate | 17 mm | 26 mm | 2,233 kN | 5 mm | ||||
| Valve Plate | 105 mm | 225 mm | 340 kN | 49 mm | ||||
| Regulator | 34,925 mm | 88,9 mm | 45,3 kN | 22,225 mm | ||||
| Valve Plates | 30 mm | FA206N- | 19.5 kN | 36.4 mm | ||||
| Housings Casings | FA206N- | 6.6 | 105 | 25 mm | ||||
| Swash Plate Assemblies | 3.543 Inch | 90 Millimeter | 5.512 Inch | 140 Millimeter | 8482.10.50.68 | Seawater | ||||
| Shoe Piston | 4300 | 35x62x14 | 0.551 Inch | 14 Millimeter | 40 ° | ||||
| Block Cylinder | 62 mm | http://www.fag.com | 24 kN | B00308 | ||||
| Central Shaft | 0.6250 in | 1.1875 in | SCOE206-30 | 26000 r/min | ||||
| Plunger Sliding Boots | 35 mm | 47 mm | 15,9 kN | 25 mm | ||||
| Set Plate | 35 mm | 62 mm | 14 mm | 14 mm | ||||
| Separator | 80 mm | 140 mm | 26 mm | 26 mm | ||||
| Coil Spring | 4300 | 25 mm | 3.6 | 105 mm | ||||
| Rexroth R901085379 PVV21-1X/055-027RB15DDMB Vane pump | Determining Operating Characteristics:1.0625 in; Drive Speed:1-7/8 in; Control Pressure Measurement:Round; Maximum rotational speed:1-1/4 in; Maximum Axial Force At Standstill:Standard Duty; Moment of inertia rotary group:2-1/16 in; Load Pressure:Three-Bolt Bracket Style; Voltage:3-1/4 in; Flow:Cast Iron - Nickel Protection; Rate Of Pressure Change:2-3/4 in; Power:Set Screw; Weight (approx.):1-39/64 in; Case volume:4410 lbf; Control Fluid Drain:3/8; Pressurefree Operation:2540 lbf; Drive Power:Lubrication Fitting; Sequence Valve:Contact with Flinger; Rotary stiffness:UCFB200NP; Pilot Pressure:1.500 in; Displacement, geometric, per revolution:UC206-17; |
| Rexroth R901084887 PVV52-1X/193-045RA15DDMC Vane pump | Drive Speed:1.0625 in; Power:1-7/8 in; Nominal Resistance:Round; Load Pressure:1-1/4 in; Rotary stiffness:Standard Duty; Drive Power:2-1/16 in; Maximum Torque:Three-Bolt Bracket Style; Determining Operating Characteristics:3-1/4 in; Sequence Valve:Cast Iron - Nickel Protection; Pilot Pressure:2-3/4 in; Weight (approx.):Set Screw; Maximum Permissible Pilot Pressure:1-39/64 in; Maximum rotational speed:4410 lbf; Voltage:3/8; Maximum Volume Flow:2540 lbf; Control Fluid Drain:Lubrication Fitting; Control Pressure Measurement:Contact with Flinger; Displacement, geometric, per revolution:UCFB200NP; Rate Of Pressure Change:1.500 in; Pressurefree Operation:UC206-17; |
| Rexroth R901085395 PVV51-1X/154-046RB15DDMC Vane pump | Maximum Volume Flow:1.0625 in; Maximum Permissible Speed (limit Speed):1-7/8 in; Maximum Axial Force At Standstill:Round; Determining Operating Characteristics:1-1/4 in; Maximum angular acceleration:Standard Duty; Case volume:2-1/16 in; Power:Three-Bolt Bracket Style; Maximum Permissible Pilot Pressure:3-1/4 in; Pilot Pressure:Cast Iron - Nickel Protection; Moment of inertia rotary group:2-3/4 in; Control Fluid Drain:Set Screw; Maximum rotational speed:1-39/64 in; Displacement, geometric, per revolution:4410 lbf; Weight (approx.):3/8; Load Pressure:2540 lbf; Sequence Valve:Lubrication Fitting; Rotary stiffness:Contact with Flinger; Drive Speed:UCFB200NP; Pressurefree Operation:1.500 in; Maximum Torque:UC206-17; |
| Rexroth R901083429 PVV54-1X/139-113LB15DDMC Vane pump | Voltage:1.0625 in; Sequence Valve:1-7/8 in; Maximum angular acceleration:Round; Rate Of Pressure Change:1-1/4 in; Pressurefree Operation:Standard Duty; Pilot Pressure:2-1/16 in; Control Fluid Drain:Three-Bolt Bracket Style; Power:3-1/4 in; Rotary stiffness:Cast Iron - Nickel Protection; Maximum Volume Flow:2-3/4 in; Displacement, geometric, per revolution:Set Screw; Flow:1-39/64 in; Case volume:4410 lbf; Control Pressure Measurement:3/8; Maximum Torque:2540 lbf; Drive Speed:Lubrication Fitting; Maximum Axial Force At Standstill:Contact with Flinger; Weight (approx.):UCFB200NP; Maximum Permissible Pilot Pressure:1.500 in; Maximum rotational speed:UC206-17; |
| Rexroth R901085387 PVV42-1X/098-040RB15DDMC Vane pump | Voltage:1.0625 in; Torque:1-7/8 in; Control Fluid Drain:Round; Control Pressure Measurement:1-1/4 in; Nominal Resistance:Standard Duty; Displacement, geometric, per revolution:2-1/16 in; Maximum Volume Flow:Three-Bolt Bracket Style; Drive Speed:3-1/4 in; Pilot Pressure:Cast Iron - Nickel Protection; Power:2-3/4 in; Maximum Axial Force At Standstill:Set Screw; Maximum Permissible Pilot Pressure:1-39/64 in; Determining Operating Characteristics:4410 lbf; Maximum Torque:3/8; Drive Power:2540 lbf; Rotary stiffness:Lubrication Fitting; Load Pressure:Contact with Flinger; Sequence Valve:UCFB200NP; Pressurefree Operation:1.500 in; Flow:UC206-17; |
| Rexroth R901085390 PVV42-1X/082-045RB15DDMC Vane pump | Pilot Pressure:1.0625 in; Maximum Permissible Speed (limit Speed):1-7/8 in; Rate Of Pressure Change:Round; Maximum rotational speed:1-1/4 in; Maximum Torque:Standard Duty; Sequence Valve:2-1/16 in; Load Pressure:Three-Bolt Bracket Style; Drive Power:3-1/4 in; Rotary stiffness:Cast Iron - Nickel Protection; Weight (approx.):2-3/4 in; Control Fluid Drain:Set Screw; Maximum Axial Force At Standstill:1-39/64 in; Maximum angular acceleration:4410 lbf; Moment of inertia rotary group:3/8; Flow:2540 lbf; Power:Lubrication Fitting; Pressurefree Operation:Contact with Flinger; Control Pressure Measurement:UCFB200NP; Torque:1.500 in; Determining Operating Characteristics:UC206-17; |
| Rexroth R901085400 PVV52-1X/162-055RB15DDMC Vane pump | Pressurefree Operation:1.0625 in; Case volume:1-7/8 in; Drive Power:Round; Sequence Valve:1-1/4 in; Torque:Standard Duty; Pilot Pressure:2-1/16 in; Weight (approx.):Three-Bolt Bracket Style; Displacement, geometric, per revolution:3-1/4 in; Moment of inertia rotary group:Cast Iron - Nickel Protection; Rate Of Pressure Change:2-3/4 in; Nominal Resistance:Set Screw; Maximum Permissible Pilot Pressure:1-39/64 in; Rotary stiffness:4410 lbf; Maximum Permissible Speed (limit Speed):3/8; Control Fluid Drain:2540 lbf; Flow:Lubrication Fitting; Load Pressure:Contact with Flinger; Power:UCFB200NP; Maximum Volume Flow:1.500 in; Maximum Axial Force At Standstill:UC206-17; |
| Rexroth R901085392 PVV51-1X/139-027RB15DDMC Vane pump | Rate Of Pressure Change:1.0625 in; Flow:1-7/8 in; Nominal Resistance:Round; Maximum Torque:1-1/4 in; Maximum rotational speed:Standard Duty; Weight (approx.):2-1/16 in; Displacement, geometric, per revolution:Three-Bolt Bracket Style; Drive Speed:3-1/4 in; Voltage:Cast Iron - Nickel Protection; Case volume:2-3/4 in; Determining Operating Characteristics:Set Screw; Load Pressure:1-39/64 in; Maximum Volume Flow:4410 lbf; Maximum Permissible Speed (limit Speed):3/8; Maximum Axial Force At Standstill:2540 lbf; Sequence Valve:Lubrication Fitting; Control Fluid Drain:Contact with Flinger; Power:UCFB200NP; Maximum Permissible Pilot Pressure:1.500 in; Control Pressure Measurement:UC206-17; |
| Rexroth R901085381 PVV21-1X/068-018RB15DDMB Vane pump | Drive Power:1.0625 in; Power:1-7/8 in; Load Pressure:Round; Control Fluid Drain:1-1/4 in; Maximum angular acceleration:Standard Duty; Moment of inertia rotary group:2-1/16 in; Pressurefree Operation:Three-Bolt Bracket Style; Nominal Resistance:3-1/4 in; Pilot Pressure:Cast Iron - Nickel Protection; Maximum Volume Flow:2-3/4 in; Sequence Valve:Set Screw; Maximum rotational speed:1-39/64 in; Determining Operating Characteristics:4410 lbf; Rate Of Pressure Change:3/8; Maximum Permissible Pilot Pressure:2540 lbf; Flow:Lubrication Fitting; Weight (approx.):Contact with Flinger; Displacement, geometric, per revolution:UCFB200NP; Torque:1.500 in; Maximum Permissible Speed (limit Speed):UC206-17; |
| Rexroth R901085383 PVV41-1X/122-027RB15DDMC Vane pump | Pilot Pressure:1.0625 in; Maximum Axial Force At Standstill:1-7/8 in; Rate Of Pressure Change:Round; Maximum angular acceleration:1-1/4 in; Pressurefree Operation:Standard Duty; Weight (approx.):2-1/16 in; Case volume:Three-Bolt Bracket Style; Maximum Volume Flow:3-1/4 in; Determining Operating Characteristics:Cast Iron - Nickel Protection; Sequence Valve:2-3/4 in; Nominal Resistance:Set Screw; Maximum Permissible Speed (limit Speed):1-39/64 in; Maximum rotational speed:4410 lbf; Displacement, geometric, per revolution:3/8; Flow:2540 lbf; Rotary stiffness:Lubrication Fitting; Control Fluid Drain:Contact with Flinger; Maximum Torque:UCFB200NP; Load Pressure:1.500 in; Drive Speed:UC206-17; |
| Rexroth R901085398 PVV52-1X/154-068RB15DDMC Vane pump | Maximum Torque:1.0625 in; Weight (approx.):1-7/8 in; Maximum angular acceleration:Round; Displacement, geometric, per revolution:1-1/4 in; Sequence Valve:Standard Duty; Maximum Permissible Speed (limit Speed):2-1/16 in; Drive Speed:Three-Bolt Bracket Style; Drive Power:3-1/4 in; Pressurefree Operation:Cast Iron - Nickel Protection; Maximum Axial Force At Standstill:2-3/4 in; Control Fluid Drain:Set Screw; Pilot Pressure:1-39/64 in; Determining Operating Characteristics:4410 lbf; Rate Of Pressure Change:3/8; Power:2540 lbf; Case volume:Lubrication Fitting; Control Pressure Measurement:Contact with Flinger; Maximum Permissible Pilot Pressure:UCFB200NP; Voltage:1.500 in; Maximum rotational speed:UC206-17; |
| Rexroth R901085385 PVV41-1X/113-018RB15DDMC Vane pump | Maximum Axial Force At Standstill:1.0625 in; Drive Power:1-7/8 in; Rotary stiffness:Round; Power:1-1/4 in; Flow:Standard Duty; Maximum angular acceleration:2-1/16 in; Moment of inertia rotary group:Three-Bolt Bracket Style; Drive Speed:3-1/4 in; Displacement, geometric, per revolution:Cast Iron - Nickel Protection; Nominal Resistance:2-3/4 in; Maximum Torque:Set Screw; Sequence Valve:1-39/64 in; Voltage:4410 lbf; Case volume:3/8; Maximum Volume Flow:2540 lbf; Torque:Lubrication Fitting; Pilot Pressure:Contact with Flinger; Maximum Permissible Pilot Pressure:UCFB200NP; Load Pressure:1.500 in; Maximum Permissible Speed (limit Speed):UC206-17; |
Fixed displacement vane pumps | Bosch Rexroth AG
Hydraulic pumps of type PVH are vane pumps with constant displacement. By simply removing the cover, the pump insert can be removed without the need of
Vane pumps | Bosch Rexroth USA
Vane pumps are available in a wider range of sizes. They are used in applications requiring medium operating pressures and low noise emissions
Fixed displacement vane pumps | Bosch Rexroth AG
Hydraulic pumps of type PVQ are vane pumps with constant displacement in mobile version
PV7 - Variable vane pumps, direct operated | Bosch Rexroth
PV7 direct operated pumps are a pressure compensated design that improves system performance and efficiency vs. fixed displacement pumps. PV7 pumps
Vane pumps | Bosch Rexroth AG
Easy to service due to exchangable pump cartridges; Within one frame size, the stroke volume can be changed by changing the installation kit; The pump can be
Vane pumps | Bosch Rexroth AG
Vane pumps are available in a wider range of sizes. They are used in applications requiring medium operating pressures and low noise emissions
Vane Pumps | Bosch Rexroth USA
Bosch vane pumps are designed to meet the requirements of the machine tool, general machinery, and other markets where low noise, high performance, and
Variable vane pumps, direct controlled | Bosch Rexroth AG
Hydraulic pumps of type PV7...A are direct operated vane pumps with adjustable displacement. For limitation of the maximum flow, the pump is equipped with a
Rexroth PVQ42-1X/098-045RA15DDMC Vane pump Video