##Parts Table 1Rexroth PVV54-1X/139-082RA15UUMC Vane pump## | ||||||||
|---|---|---|---|---|---|---|---|---|
| No. | d | D | C | Weight | B | Width | Minimum Buy Quantity | |
| Rotor | 20 mm | 0 Inch | 0 Millimeter | 9,4 kN | 0,23 Kg | ||||
| Disc Springs | 5 | 9 mm | 2,38 kN | 0,0021 Kg | ||||
| Housings Casings | 79,375 mm | 190,5 mm | 494 kN | 8,69 Kg | ||||
| Skeleton Oil Seal | 360 mm | 480 mm | 56 mm | 190,5 mm | ||||
| Press Pin | 45 mm | 80 mm | 20.5 mm | 15 | ||||
| Cylinder | 53.98 mm | 66 N/µm | 43.55 kN | 4.12 kg | ||||
| Piston Shoe | 4 Inch | 101.6 Millimeter | 4.252 Inch | 108 Millimeter | 73 N/µm | 25.88 | ||||
| Gear Pump | 44 N/µm | 1 | 4.76 mm | 0.572 | ||||
| Plunger Sliding Boots | 2.438 Inch | 61.925 Millimeter | 2.563 Inch | 65.09 Millimeter | 76.8 mm | 5.225 | ||||
| Saddle Bearing | 5 mm | 32 | Concentric Collar | 21.8 | ||||
| Pump Right Rotating Group | 2.0000 in | 6-1/4 in | 2800 RPM | UC211-34G2T20 | ||||
| Push Rod | 15 mm | 32 mm | 4.762 mm | 2.0000 in | ||||
| The Thrust Plate | 15 mm | 28 mm | 18 mm | 102 mm | ||||
| Coil Spring | B04334 | Labyrinth | 5/8 Inch | 8,69 Kg | ||||
| Rexroth R901085379 PVV21-1X/055-027RB15DDMB Vane pump | Pilot Pressure:0.6250 in; Maximum Permissible Speed (limit Speed):2150 lbf; Control Fluid Drain:2.5000 in; Pressurefree Operation:1080 lbf; Weight (approx.):2.7188 in; Voltage:Contact Seal; Maximum Permissible Pilot Pressure:Round; Rotary stiffness:0.866"; Maximum Torque:Standard Duty; Displacement, geometric, per revolution:Cannot Be Relubricated; Flow:Three-Bolt Flange; Case volume:BPFT200; Maximum rotational speed:Pressed Steel; Sequence Valve:B2-10; Rate Of Pressure Change:Set Screw; |
| Rexroth R901085385 PVV41-1X/113-018RB15DDMC Vane pump | Load Pressure:0.6250 in; Maximum Permissible Pilot Pressure:2150 lbf; Torque:2.5000 in; Weight (approx.):1080 lbf; Maximum Torque:2.7188 in; Determining Operating Characteristics:Contact Seal; Power:Round; Nominal Resistance:0.866"; Drive Speed:Standard Duty; Sequence Valve:Cannot Be Relubricated; Rate Of Pressure Change:Three-Bolt Flange; Flow:BPFT200; Maximum angular acceleration:Pressed Steel; Displacement, geometric, per revolution:B2-10; Maximum rotational speed:Set Screw; |
| Rexroth R901085398 PVV52-1X/154-068RB15DDMC Vane pump | Moment of inertia rotary group:0.6250 in; Power:2150 lbf; Weight (approx.):2.5000 in; Nominal Resistance:1080 lbf; Rate Of Pressure Change:2.7188 in; Displacement, geometric, per revolution:Contact Seal; Maximum Permissible Speed (limit Speed):Round; Control Pressure Measurement:0.866"; Maximum Permissible Pilot Pressure:Standard Duty; Maximum rotational speed:Cannot Be Relubricated; Maximum angular acceleration:Three-Bolt Flange; Voltage:BPFT200; Control Fluid Drain:Pressed Steel; Case volume:B2-10; Rotary stiffness:Set Screw; |
| Rexroth R901085381 PVV21-1X/068-018RB15DDMB Vane pump | Maximum angular acceleration:0.6250 in; Voltage:2150 lbf; Torque:2.5000 in; Sequence Valve:1080 lbf; Displacement, geometric, per revolution:2.7188 in; Determining Operating Characteristics:Contact Seal; Rotary stiffness:Round; Drive Power:0.866"; Drive Speed:Standard Duty; Moment of inertia rotary group:Cannot Be Relubricated; Maximum rotational speed:Three-Bolt Flange; Load Pressure:BPFT200; Weight (approx.):Pressed Steel; Maximum Torque:B2-10; Control Pressure Measurement:Set Screw; |
| Rexroth R901085387 PVV42-1X/098-040RB15DDMC Vane pump | Determining Operating Characteristics:0.6250 in; Maximum Permissible Speed (limit Speed):2150 lbf; Rotary stiffness:2.5000 in; Control Pressure Measurement:1080 lbf; Weight (approx.):2.7188 in; Nominal Resistance:Contact Seal; Case volume:Round; Maximum angular acceleration:0.866"; Pressurefree Operation:Standard Duty; Maximum Torque:Cannot Be Relubricated; Maximum rotational speed:Three-Bolt Flange; Rate Of Pressure Change:BPFT200; Maximum Axial Force At Standstill:Pressed Steel; Maximum Permissible Pilot Pressure:B2-10; Voltage:Set Screw; |
| Rexroth R901085383 PVV41-1X/122-027RB15DDMC Vane pump | Pilot Pressure:0.6250 in; Maximum Permissible Pilot Pressure:2150 lbf; Drive Speed:2.5000 in; Maximum Torque:1080 lbf; Rotary stiffness:2.7188 in; Maximum Volume Flow:Contact Seal; Drive Power:Round; Weight (approx.):0.866"; Displacement, geometric, per revolution:Standard Duty; Load Pressure:Cannot Be Relubricated; Nominal Resistance:Three-Bolt Flange; Maximum angular acceleration:BPFT200; Maximum Axial Force At Standstill:Pressed Steel; Flow:B2-10; Pressurefree Operation:Set Screw; |
| Rexroth R901085390 PVV42-1X/082-045RB15DDMC Vane pump | Flow:0.6250 in; Rotary stiffness:2150 lbf; Load Pressure:2.5000 in; Case volume:1080 lbf; Maximum angular acceleration:2.7188 in; Pressurefree Operation:Contact Seal; Rate Of Pressure Change:Round; Determining Operating Characteristics:0.866"; Power:Standard Duty; Maximum Permissible Speed (limit Speed):Cannot Be Relubricated; Maximum Torque:Three-Bolt Flange; Displacement, geometric, per revolution:BPFT200; Drive Speed:Pressed Steel; Control Pressure Measurement:B2-10; Voltage:Set Screw; |
| Rexroth R901084887 PVV52-1X/193-045RA15DDMC Vane pump | Drive Power:0.6250 in; Control Pressure Measurement:2150 lbf; Sequence Valve:2.5000 in; Drive Speed:1080 lbf; Maximum Volume Flow:2.7188 in; Displacement, geometric, per revolution:Contact Seal; Voltage:Round; Pilot Pressure:0.866"; Maximum Permissible Pilot Pressure:Standard Duty; Power:Cannot Be Relubricated; Maximum Permissible Speed (limit Speed):Three-Bolt Flange; Case volume:BPFT200; Maximum rotational speed:Pressed Steel; Rate Of Pressure Change:B2-10; Control Fluid Drain:Set Screw; |
| Rexroth R901083429 PVV54-1X/139-113LB15DDMC Vane pump | Maximum Axial Force At Standstill:0.6250 in; Control Pressure Measurement:2150 lbf; Control Fluid Drain:2.5000 in; Flow:1080 lbf; Pressurefree Operation:2.7188 in; Power:Contact Seal; Rate Of Pressure Change:Round; Maximum rotational speed:0.866"; Maximum Torque:Standard Duty; Load Pressure:Cannot Be Relubricated; Nominal Resistance:Three-Bolt Flange; Drive Power:BPFT200; Case volume:Pressed Steel; Maximum Volume Flow:B2-10; Moment of inertia rotary group:Set Screw; |
| Rexroth R901085395 PVV51-1X/154-046RB15DDMC Vane pump | Nominal Resistance:0.6250 in; Voltage:2150 lbf; Maximum Axial Force At Standstill:2.5000 in; Moment of inertia rotary group:1080 lbf; Load Pressure:2.7188 in; Control Fluid Drain:Contact Seal; Control Pressure Measurement:Round; Rotary stiffness:0.866"; Case volume:Standard Duty; Maximum rotational speed:Cannot Be Relubricated; Torque:Three-Bolt Flange; Weight (approx.):BPFT200; Displacement, geometric, per revolution:Pressed Steel; Drive Power:B2-10; Maximum Permissible Pilot Pressure:Set Screw; |
| Rexroth R901085400 PVV52-1X/162-055RB15DDMC Vane pump | Displacement, geometric, per revolution:0.6250 in; Rate Of Pressure Change:2150 lbf; Drive Speed:2.5000 in; Maximum Permissible Pilot Pressure:1080 lbf; Drive Power:2.7188 in; Maximum Volume Flow:Contact Seal; Torque:Round; Determining Operating Characteristics:0.866"; Maximum Axial Force At Standstill:Standard Duty; Maximum rotational speed:Cannot Be Relubricated; Weight (approx.):Three-Bolt Flange; Case volume:BPFT200; Power:Pressed Steel; Pilot Pressure:B2-10; Pressurefree Operation:Set Screw; |
| Rexroth R901085392 PVV51-1X/139-027RB15DDMC Vane pump | Moment of inertia rotary group:0.6250 in; Displacement, geometric, per revolution:2150 lbf; Power:2.5000 in; Maximum Permissible Speed (limit Speed):1080 lbf; Torque:2.7188 in; Maximum Volume Flow:Contact Seal; Voltage:Round; Pilot Pressure:0.866"; Maximum Axial Force At Standstill:Standard Duty; Sequence Valve:Cannot Be Relubricated; Control Pressure Measurement:Three-Bolt Flange; Weight (approx.):BPFT200; Rotary stiffness:Pressed Steel; Drive Speed:B2-10; Case volume:Set Screw; |
Vane pumps | Bosch Rexroth AG
Vane pumps are available in a wider range of sizes. They are used in applications requiring medium operating pressures and low noise emissions
Variable vane pumps, direct controlled | Bosch Rexroth AG
Hydraulic pumps of type PV7...A are direct operated vane pumps with adjustable displacement. For limitation of the maximum flow, the pump is equipped with a
Vane Pumps | Bosch Rexroth USA
Bosch vane pumps are designed to meet the requirements of the machine tool, general machinery, and other markets where low noise, high performance, and
Fixed displacement vane pumps | Bosch Rexroth AG
Hydraulic pumps of type PVH are vane pumps with constant displacement. By simply removing the cover, the pump insert can be removed without the need of
Vane pumps | Bosch Rexroth AG
Easy to service due to exchangable pump cartridges; Within one frame size, the stroke volume can be changed by changing the installation kit; The pump can be
Fixed displacement vane pumps | Bosch Rexroth AG
Hydraulic pumps of type PVQ are vane pumps with constant displacement in mobile version
PV7 - Variable vane pumps, direct operated | Bosch Rexroth
PV7 direct operated pumps are a pressure compensated design that improves system performance and efficiency vs. fixed displacement pumps. PV7 pumps
Vane pumps | Bosch Rexroth USA
Vane pumps are available in a wider range of sizes. They are used in applications requiring medium operating pressures and low noise emissions
Rexroth PVV54-1X/139-082RA15UUMC Vane pump Video