##Parts Table 1Rexroth PVV52-1X/193-055RB15UUMC Vane pump## | ||||||||
|---|---|---|---|---|---|---|---|---|
| No. | d | D | B | C | Weight | Diametro esterno | Larghezza | |
| Skeleton Oil Seal | 20 mm | 35 mm | 16 mm | 30 kN | ||||
| Pressure Plate | 30 mm | 85 mm | 42,9 mm | 8 mm | ||||
| Oil Distribution Plate | 15,875 mm | 40 mm | 12 mm | 9,55 kN | ||||
| Cylinder Blocks | 2.953 Inch | 75 Millimeter | 3.291 Inch | 83.6 Millimeter | 345 kN | Yes | ||||
| Bearing Plate | 0.33 | Single Row | 3.543 Inch | 90 Millimeter | 150 mm | ||||
| Piston Sets | 0.984 Inch | 25 Millimeter | 2.047 Inch | 52 Millimeter | 0.591 Inch | 15 Millimeter | 7.718 | ||||
| Press Pin | 3.543 Inch | 90 Millimeter | 6.299 Inch | 160 Millimeter | 1.535 Inch | 39 Millimeter | 8482.50.00.00 | ||||
| Saddle Bearing | 10.2500 in | 16.9970 in | 68 | 8 mm | ||||
| Swing | Cylindrical Roller Bearing | 2.3750 in | 8482.50.00.00 | 90MM Bore; Straight Bore Profile; 160MM Outside Diameter; 39MM Width; Bronze Cage Matetrial; RBEC 1 | ISO P0; Single Row; Inner Ring - One Side Separable; No Snap Ring; Relubricatable; C0-Medium Inter | ||||
| Servo Piston | 12.000 mm | 37.0000 mm | 19.1 mm | 85 mm | ||||
| Valve Plates | 70 mm | 150 mm | 35 mm | 35 mm | ||||
| Ball Guides | 160 mm | 340 mm | 68 mm | 68 mm | ||||
| Regulator | 90 mm | 125 mm | 35 mm | 35 mm | ||||
| Shoe Plates | 229 kN | 2.047 Inch | 52 Millimeter | Flange Type | 68 mm | ||||
| Rexroth R901085381 PVV21-1X/068-018RB15DDMB Vane pump | Maximum Torque:7314CDT; Displacement, geometric, per revolution:70x150x35; Voltage:70; Sequence Valve:150; Control Pressure Measurement:35; Control Fluid Drain:70 mm; Maximum Axial Force At Standstill:150 mm; Determining Operating Characteristics:35 mm; Power:35 mm; Rotary stiffness:15 °; Nominal Resistance:2,1 mm; Drive Speed:70 mm; Load Pressure:5 Kg; Flow:205 kN; Maximum rotational speed:184 kN; Case volume:5900 r/min; |
| Rexroth R901085398 PVV52-1X/154-068RB15DDMC Vane pump | Maximum Volume Flow:7314CDT; Rotary stiffness:70x150x35; Maximum Permissible Speed (limit Speed):70; Control Pressure Measurement:150; Control Fluid Drain:35; Power:70 mm; Nominal Resistance:150 mm; Load Pressure:35 mm; Maximum Permissible Pilot Pressure:35 mm; Displacement, geometric, per revolution:15 °; Drive Speed:2,1 mm; Case volume:70 mm; Maximum rotational speed:5 Kg; Maximum Axial Force At Standstill:205 kN; Weight (approx.):184 kN; Maximum Torque:5900 r/min; |
| Rexroth R901085385 PVV41-1X/113-018RB15DDMC Vane pump | Moment of inertia rotary group:7314CDT; Pilot Pressure:70x150x35; Control Pressure Measurement:70; Maximum rotational speed:150; Maximum Axial Force At Standstill:35; Drive Power:70 mm; Maximum Torque:150 mm; Rotary stiffness:35 mm; Flow:35 mm; Drive Speed:15 °; Maximum Volume Flow:2,1 mm; Maximum Permissible Speed (limit Speed):70 mm; Nominal Resistance:5 Kg; Pressurefree Operation:205 kN; Rate Of Pressure Change:184 kN; Voltage:5900 r/min; |
| Rexroth R901085390 PVV42-1X/082-045RB15DDMC Vane pump | Load Pressure:7314CDT; Drive Power:70x150x35; Weight (approx.):70; Maximum Permissible Pilot Pressure:150; Maximum Axial Force At Standstill:35; Maximum Torque:70 mm; Pressurefree Operation:150 mm; Moment of inertia rotary group:35 mm; Rate Of Pressure Change:35 mm; Determining Operating Characteristics:15 °; Displacement, geometric, per revolution:2,1 mm; Rotary stiffness:70 mm; Maximum Volume Flow:5 Kg; Power:205 kN; Control Fluid Drain:184 kN; Maximum Permissible Speed (limit Speed):5900 r/min; |
| Rexroth R901083429 PVV54-1X/139-113LB15DDMC Vane pump | Flow:7314CDT; Maximum Permissible Speed (limit Speed):70x150x35; Torque:70; Maximum Axial Force At Standstill:150; Power:35; Rate Of Pressure Change:70 mm; Maximum Permissible Pilot Pressure:150 mm; Weight (approx.):35 mm; Displacement, geometric, per revolution:35 mm; Maximum angular acceleration:15 °; Control Fluid Drain:2,1 mm; Maximum Torque:70 mm; Control Pressure Measurement:5 Kg; Pressurefree Operation:205 kN; Pilot Pressure:184 kN; Sequence Valve:5900 r/min; |
| Rexroth R901085400 PVV52-1X/162-055RB15DDMC Vane pump | Drive Speed:7314CDT; Case volume:70x150x35; Rotary stiffness:70; Determining Operating Characteristics:150; Voltage:35; Moment of inertia rotary group:70 mm; Pressurefree Operation:150 mm; Maximum Permissible Speed (limit Speed):35 mm; Nominal Resistance:35 mm; Maximum Volume Flow:15 °; Power:2,1 mm; Displacement, geometric, per revolution:70 mm; Rate Of Pressure Change:5 Kg; Sequence Valve:205 kN; Flow:184 kN; Load Pressure:5900 r/min; |
| Rexroth R901085392 PVV51-1X/139-027RB15DDMC Vane pump | Case volume:7314CDT; Weight (approx.):70x150x35; Nominal Resistance:70; Maximum angular acceleration:150; Control Fluid Drain:35; Drive Power:70 mm; Drive Speed:150 mm; Rotary stiffness:35 mm; Maximum Permissible Speed (limit Speed):35 mm; Maximum Volume Flow:15 °; Pilot Pressure:2,1 mm; Moment of inertia rotary group:70 mm; Determining Operating Characteristics:5 Kg; Power:205 kN; Maximum Torque:184 kN; Control Pressure Measurement:5900 r/min; |
| Rexroth R901084887 PVV52-1X/193-045RA15DDMC Vane pump | Case volume:7314CDT; Drive Power:70x150x35; Maximum Permissible Speed (limit Speed):70; Maximum Volume Flow:150; Maximum rotational speed:35; Maximum angular acceleration:70 mm; Control Pressure Measurement:150 mm; Pilot Pressure:35 mm; Displacement, geometric, per revolution:35 mm; Power:15 °; Voltage:2,1 mm; Torque:70 mm; Rotary stiffness:5 Kg; Moment of inertia rotary group:205 kN; Weight (approx.):184 kN; Rate Of Pressure Change:5900 r/min; |
| Rexroth R901085387 PVV42-1X/098-040RB15DDMC Vane pump | Displacement, geometric, per revolution:7314CDT; Torque:70x150x35; Rate Of Pressure Change:70; Case volume:150; Flow:35; Maximum Volume Flow:70 mm; Nominal Resistance:150 mm; Maximum Permissible Speed (limit Speed):35 mm; Pilot Pressure:35 mm; Control Fluid Drain:15 °; Maximum Axial Force At Standstill:2,1 mm; Pressurefree Operation:70 mm; Rotary stiffness:5 Kg; Maximum rotational speed:205 kN; Sequence Valve:184 kN; Moment of inertia rotary group:5900 r/min; |
| Rexroth R901085379 PVV21-1X/055-027RB15DDMB Vane pump | Case volume:7314CDT; Flow:70x150x35; Maximum rotational speed:70; Power:150; Maximum angular acceleration:35; Maximum Permissible Speed (limit Speed):70 mm; Rotary stiffness:150 mm; Pressurefree Operation:35 mm; Weight (approx.):35 mm; Drive Speed:15 °; Voltage:2,1 mm; Pilot Pressure:70 mm; Sequence Valve:5 Kg; Rate Of Pressure Change:205 kN; Moment of inertia rotary group:184 kN; Control Fluid Drain:5900 r/min; |
| Rexroth R901085383 PVV41-1X/122-027RB15DDMC Vane pump | Pilot Pressure:7314CDT; Voltage:70x150x35; Power:70; Rate Of Pressure Change:150; Nominal Resistance:35; Torque:70 mm; Rotary stiffness:150 mm; Flow:35 mm; Maximum Torque:35 mm; Maximum Permissible Speed (limit Speed):15 °; Determining Operating Characteristics:2,1 mm; Drive Power:70 mm; Pressurefree Operation:5 Kg; Control Fluid Drain:205 kN; Case volume:184 kN; Maximum angular acceleration:5900 r/min; |
| Rexroth R901085395 PVV51-1X/154-046RB15DDMC Vane pump | Moment of inertia rotary group:7314CDT; Maximum rotational speed:70x150x35; Rate Of Pressure Change:70; Control Pressure Measurement:150; Pressurefree Operation:35; Maximum angular acceleration:70 mm; Maximum Permissible Speed (limit Speed):150 mm; Power:35 mm; Displacement, geometric, per revolution:35 mm; Flow:15 °; Control Fluid Drain:2,1 mm; Weight (approx.):70 mm; Torque:5 Kg; Load Pressure:205 kN; Pilot Pressure:184 kN; Determining Operating Characteristics:5900 r/min; |
Vane pumps | Bosch Rexroth USA
Vane pumps are available in a wider range of sizes. They are used in applications requiring medium operating pressures and low noise emissions
Vane pumps | Bosch Rexroth AG
Vane pumps are available in a wider range of sizes. They are used in applications requiring medium operating pressures and low noise emissions
Fixed displacement vane pumps | Bosch Rexroth AG
Hydraulic pumps of type PVQ are vane pumps with constant displacement in mobile version
PV7 - Variable vane pumps, direct operated | Bosch Rexroth
PV7 direct operated pumps are a pressure compensated design that improves system performance and efficiency vs. fixed displacement pumps. PV7 pumps
Vane Pumps | Bosch Rexroth USA
Bosch vane pumps are designed to meet the requirements of the machine tool, general machinery, and other markets where low noise, high performance, and
Vane pumps | Bosch Rexroth AG
Easy to service due to exchangable pump cartridges; Within one frame size, the stroke volume can be changed by changing the installation kit; The pump can be
Fixed displacement vane pumps | Bosch Rexroth AG
Hydraulic pumps of type PVH are vane pumps with constant displacement. By simply removing the cover, the pump insert can be removed without the need of
Variable vane pumps, direct controlled | Bosch Rexroth AG
Hydraulic pumps of type PV7...A are direct operated vane pumps with adjustable displacement. For limitation of the maximum flow, the pump is equipped with a
Rexroth PVV52-1X/193-055RB15UUMC Vane pump Video