##Parts Table 1Rexroth PVV21-1X/068-027RA15LUMB Vane pump## | ||||||||
|---|---|---|---|---|---|---|---|---|
| No. | Weight | Inventory | Minimum Buy Quantity | d | D | B | C | |
| Swash Plate Assemblies | 163.701 | 0.0 | N/A | Yes | ||||
| Disc Springs | 71 mm | 31171511 | Double Row | Single Collar | Extended Inner Race | With Set Screw | 20 mm | ||||
| Inclined Plate | 1.6 kg | 0.0 | 0.9063 in | 35 mm | ||||
| Central Shaft | 4.994 | 0.0 | N/A | 1.688 Inch | 42.875 Millimeter | ||||
| Valve Plate | 0.809 | 0.0 | N/A | Oil Seal | ||||
| Piston Sets | 11.7 | 0.0 | N/A | 15.2 kN | ||||
| Valve Plates | 163.701 | 0.0 | N/A | Carbon Steel Garter | ||||
| Drive Shaft | 1.5 | 0.0 | N/A | Bearing | ||||
| Cylinder Block | 89 mm | 25.7 kN | 51.1 mm | 0.3750 in | ||||
| Spindle | 52100 Steel | 2.686 Inch / 68.224 Millimeter | 60 | 60 mm | ||||
| Pressure Plate | Oil Seal | 0.093 | 4.994 | 20 mm | ||||
| Bearing Plate | 0,13 Kg | 129 mm | 11150 r/min | 0.809 | ||||
| Rexroth R901085398 PVV52-1X/154-068RB15DDMC Vane pump | Maximum angular acceleration:2.0000 in; Control Pressure Measurement:2150 lbf; Displacement, geometric, per revolution:6.1875 in; Pilot Pressure:1080 lbf; Maximum Axial Force At Standstill:7.4375 in; Weight (approx.):Contact with Flinger; Pressurefree Operation:Round; Load Pressure:0.866 in; Maximum Permissible Speed (limit Speed):Standard Duty; Voltage:Lubrication Fitting; Maximum Permissible Pilot Pressure:Two-Bolt Flange; Rotary stiffness:MUCFT200TC; Rate Of Pressure Change:Cast Iron - Teflon Protection; Drive Speed:MUC210-32; Maximum Volume Flow:Set Screw; |
| Rexroth R901084887 PVV52-1X/193-045RA15DDMC Vane pump | Maximum Axial Force At Standstill:2.0000 in; Sequence Valve:2150 lbf; Pilot Pressure:6.1875 in; Drive Speed:1080 lbf; Determining Operating Characteristics:7.4375 in; Maximum angular acceleration:Contact with Flinger; Pressurefree Operation:Round; Voltage:0.866 in; Flow:Standard Duty; Control Pressure Measurement:Lubrication Fitting; Maximum Volume Flow:Two-Bolt Flange; Nominal Resistance:MUCFT200TC; Displacement, geometric, per revolution:Cast Iron - Teflon Protection; Maximum Permissible Pilot Pressure:MUC210-32; Torque:Set Screw; |
| Rexroth R901085387 PVV42-1X/098-040RB15DDMC Vane pump | Maximum Permissible Pilot Pressure:2.0000 in; Flow:2150 lbf; Control Pressure Measurement:6.1875 in; Pilot Pressure:1080 lbf; Pressurefree Operation:7.4375 in; Maximum Torque:Contact with Flinger; Maximum Axial Force At Standstill:Round; Case volume:0.866 in; Nominal Resistance:Standard Duty; Voltage:Lubrication Fitting; Maximum Permissible Speed (limit Speed):Two-Bolt Flange; Control Fluid Drain:MUCFT200TC; Maximum rotational speed:Cast Iron - Teflon Protection; Maximum angular acceleration:MUC210-32; Rotary stiffness:Set Screw; |
| Rexroth R901085400 PVV52-1X/162-055RB15DDMC Vane pump | Control Pressure Measurement:2.0000 in; Determining Operating Characteristics:2150 lbf; Case volume:6.1875 in; Pilot Pressure:1080 lbf; Maximum angular acceleration:7.4375 in; Voltage:Contact with Flinger; Maximum Permissible Speed (limit Speed):Round; Torque:0.866 in; Rate Of Pressure Change:Standard Duty; Weight (approx.):Lubrication Fitting; Maximum Volume Flow:Two-Bolt Flange; Flow:MUCFT200TC; Maximum Axial Force At Standstill:Cast Iron - Teflon Protection; Nominal Resistance:MUC210-32; Moment of inertia rotary group:Set Screw; |
| Rexroth R901085392 PVV51-1X/139-027RB15DDMC Vane pump | Rate Of Pressure Change:2.0000 in; Maximum Volume Flow:2150 lbf; Voltage:6.1875 in; Torque:1080 lbf; Control Fluid Drain:7.4375 in; Maximum angular acceleration:Contact with Flinger; Control Pressure Measurement:Round; Determining Operating Characteristics:0.866 in; Pressurefree Operation:Standard Duty; Maximum Axial Force At Standstill:Lubrication Fitting; Maximum Permissible Pilot Pressure:Two-Bolt Flange; Maximum Torque:MUCFT200TC; Weight (approx.):Cast Iron - Teflon Protection; Displacement, geometric, per revolution:MUC210-32; Drive Speed:Set Screw; |
| Rexroth R901085379 PVV21-1X/055-027RB15DDMB Vane pump | Flow:2.0000 in; Pilot Pressure:2150 lbf; Maximum angular acceleration:6.1875 in; Weight (approx.):1080 lbf; Case volume:7.4375 in; Power:Contact with Flinger; Maximum Permissible Pilot Pressure:Round; Displacement, geometric, per revolution:0.866 in; Determining Operating Characteristics:Standard Duty; Maximum rotational speed:Lubrication Fitting; Maximum Torque:Two-Bolt Flange; Rotary stiffness:MUCFT200TC; Maximum Permissible Speed (limit Speed):Cast Iron - Teflon Protection; Load Pressure:MUC210-32; Control Pressure Measurement:Set Screw; |
| Rexroth R901085390 PVV42-1X/082-045RB15DDMC Vane pump | Pressurefree Operation:2.0000 in; Case volume:2150 lbf; Sequence Valve:6.1875 in; Power:1080 lbf; Displacement, geometric, per revolution:7.4375 in; Pilot Pressure:Contact with Flinger; Control Pressure Measurement:Round; Drive Power:0.866 in; Rotary stiffness:Standard Duty; Maximum Volume Flow:Lubrication Fitting; Maximum Permissible Speed (limit Speed):Two-Bolt Flange; Load Pressure:MUCFT200TC; Maximum Torque:Cast Iron - Teflon Protection; Flow:MUC210-32; Control Fluid Drain:Set Screw; |
| Rexroth R901085381 PVV21-1X/068-018RB15DDMB Vane pump | Nominal Resistance:2.0000 in; Rotary stiffness:2150 lbf; Moment of inertia rotary group:6.1875 in; Maximum Permissible Pilot Pressure:1080 lbf; Maximum Axial Force At Standstill:7.4375 in; Maximum Volume Flow:Contact with Flinger; Voltage:Round; Pressurefree Operation:0.866 in; Maximum Torque:Standard Duty; Torque:Lubrication Fitting; Control Fluid Drain:Two-Bolt Flange; Displacement, geometric, per revolution:MUCFT200TC; Maximum angular acceleration:Cast Iron - Teflon Protection; Determining Operating Characteristics:MUC210-32; Pilot Pressure:Set Screw; |
| Rexroth R901083429 PVV54-1X/139-113LB15DDMC Vane pump | Torque:2.0000 in; Load Pressure:2150 lbf; Rate Of Pressure Change:6.1875 in; Nominal Resistance:1080 lbf; Maximum rotational speed:7.4375 in; Moment of inertia rotary group:Contact with Flinger; Maximum Torque:Round; Sequence Valve:0.866 in; Voltage:Standard Duty; Maximum Volume Flow:Lubrication Fitting; Displacement, geometric, per revolution:Two-Bolt Flange; Weight (approx.):MUCFT200TC; Maximum angular acceleration:Cast Iron - Teflon Protection; Drive Speed:MUC210-32; Pilot Pressure:Set Screw; |
| Rexroth R901085395 PVV51-1X/154-046RB15DDMC Vane pump | Maximum Axial Force At Standstill:2.0000 in; Maximum Torque:2150 lbf; Rotary stiffness:6.1875 in; Maximum angular acceleration:1080 lbf; Drive Speed:7.4375 in; Weight (approx.):Contact with Flinger; Power:Round; Maximum Permissible Speed (limit Speed):0.866 in; Pilot Pressure:Standard Duty; Displacement, geometric, per revolution:Lubrication Fitting; Rate Of Pressure Change:Two-Bolt Flange; Nominal Resistance:MUCFT200TC; Control Fluid Drain:Cast Iron - Teflon Protection; Moment of inertia rotary group:MUC210-32; Flow:Set Screw; |
| Rexroth R901085383 PVV41-1X/122-027RB15DDMC Vane pump | Maximum angular acceleration:2.0000 in; Moment of inertia rotary group:2150 lbf; Maximum Axial Force At Standstill:6.1875 in; Case volume:1080 lbf; Nominal Resistance:7.4375 in; Torque:Contact with Flinger; Flow:Round; Displacement, geometric, per revolution:0.866 in; Power:Standard Duty; Drive Power:Lubrication Fitting; Maximum Volume Flow:Two-Bolt Flange; Weight (approx.):MUCFT200TC; Pilot Pressure:Cast Iron - Teflon Protection; Rate Of Pressure Change:MUC210-32; Pressurefree Operation:Set Screw; |
| Rexroth R901085385 PVV41-1X/113-018RB15DDMC Vane pump | Nominal Resistance:2.0000 in; Torque:2150 lbf; Maximum Permissible Pilot Pressure:6.1875 in; Sequence Valve:1080 lbf; Pilot Pressure:7.4375 in; Case volume:Contact with Flinger; Control Fluid Drain:Round; Rate Of Pressure Change:0.866 in; Load Pressure:Standard Duty; Drive Speed:Lubrication Fitting; Weight (approx.):Two-Bolt Flange; Moment of inertia rotary group:MUCFT200TC; Maximum Permissible Speed (limit Speed):Cast Iron - Teflon Protection; Pressurefree Operation:MUC210-32; Flow:Set Screw; |
Vane pumps | Bosch Rexroth AG
Vane pumps are available in a wider range of sizes. They are used in applications requiring medium operating pressures and low noise emissions
Vane pumps | Bosch Rexroth USA
Vane pumps are available in a wider range of sizes. They are used in applications requiring medium operating pressures and low noise emissions
PV7 - Variable vane pumps, direct operated | Bosch Rexroth
PV7 direct operated pumps are a pressure compensated design that improves system performance and efficiency vs. fixed displacement pumps. PV7 pumps
Vane Pumps | Bosch Rexroth USA
Bosch vane pumps are designed to meet the requirements of the machine tool, general machinery, and other markets where low noise, high performance, and
Fixed displacement vane pumps | Bosch Rexroth AG
Hydraulic pumps of type PVH are vane pumps with constant displacement. By simply removing the cover, the pump insert can be removed without the need of
Variable vane pumps, direct controlled | Bosch Rexroth AG
Hydraulic pumps of type PV7...A are direct operated vane pumps with adjustable displacement. For limitation of the maximum flow, the pump is equipped with a
Vane pumps | Bosch Rexroth AG
Easy to service due to exchangable pump cartridges; Within one frame size, the stroke volume can be changed by changing the installation kit; The pump can be
Fixed displacement vane pumps | Bosch Rexroth AG
Hydraulic pumps of type PVQ are vane pumps with constant displacement in mobile version
Rexroth PVV21-1X/068-027RA15LUMB Vane pump Video