##Parts Table 1Rexroth PVV4-1X/113RA15DMC Vane pump## | ||||||||
|---|---|---|---|---|---|---|---|---|
| No. | D | d | B | Weight | Width | C | Size | |
| Servo Piston | 310 mm | 310 | 86 mm | 92 mm | ||||
| Coil Spring | 280 mm | 180 mm | 46 mm | 9.98 Kg | ||||
| Plunger Sliding Boots | 0.114 | 2.938 Inch | 74.625 Millimeter | Cylindrical Bore | 13.62 | ||||
| Rotor | 12.598 Inch | 320 Millimeter | 5.906 Inch | 150 Millimeter | Low Carbon Steel | 25.3 | ||||
| Seal Kits | 9.98 Kg | 0.1250 in | 1630 kN | 0.019 lb | ||||
| Swash Plate Assy | 1.2500 in | 0.3125 in | 0.5625 in | 1270 kN | ||||
| Snap Ring | 2.50 in | 31171504 | 21.2500 in | 16.4 | ||||
| Block Cylinder | 12mm | 4mm | 4mm | AB5822E4 SB 350 410 25 NBR NOK | ||||
| The Thrust Plate | 78 mm | 40 mm | In Stock | V Lock | ||||
| Rod | 2,000 rpm | Unit Only | 2.50 in | N/A | ||||
| Cylinder | LOR 126 | 180 | Double Row | Single Nut | Non-expansion | Two Lip Viton Seal | Steel Cage | http://www.qmbearings.com | ||||
| Rexroth R901085395 PVV51-1X/154-046RB15DDMC Vane pump | Nominal Resistance:7/8 in; Maximum Volume Flow:1780 lbf; Maximum Permissible Pilot Pressure:3-1/8 in; Drive Power:Contact with Slinger; Maximum Torque:1-1/32 in; Displacement, geometric, per revolution:Lubrication Fitting; Power:1.339 in; Torque:AISI 52100 Steel; Rotary stiffness:Cast Iron; Flow:UCLC200; Control Fluid Drain:Set Screw; Weight (approx.):Normal Duty; Maximum angular acceleration:Non-Expansion Bearing (Fixed); Moment of inertia rotary group:UC205-14; Pilot Pressure:3150 lbf lbf; |
| Rexroth R901085385 PVV41-1X/113-018RB15DDMC Vane pump | Maximum Volume Flow:7/8 in; Load Pressure:1780 lbf; Maximum Torque:3-1/8 in; Flow:Contact with Slinger; Drive Power:1-1/32 in; Torque:Lubrication Fitting; Maximum rotational speed:1.339 in; Control Pressure Measurement:AISI 52100 Steel; Rotary stiffness:Cast Iron; Maximum Permissible Speed (limit Speed):UCLC200; Weight (approx.):Set Screw; Moment of inertia rotary group:Normal Duty; Rate Of Pressure Change:Non-Expansion Bearing (Fixed); Voltage:UC205-14; Case volume:3150 lbf lbf; |
| Rexroth R901085398 PVV52-1X/154-068RB15DDMC Vane pump | Rate Of Pressure Change:7/8 in; Maximum Axial Force At Standstill:1780 lbf; Maximum Permissible Pilot Pressure:3-1/8 in; Maximum angular acceleration:Contact with Slinger; Drive Speed:1-1/32 in; Pilot Pressure:Lubrication Fitting; Case volume:1.339 in; Moment of inertia rotary group:AISI 52100 Steel; Determining Operating Characteristics:Cast Iron; Nominal Resistance:UCLC200; Power:Set Screw; Weight (approx.):Normal Duty; Flow:Non-Expansion Bearing (Fixed); Maximum Permissible Speed (limit Speed):UC205-14; Pressurefree Operation:3150 lbf lbf; |
| Rexroth R901085383 PVV41-1X/122-027RB15DDMC Vane pump | Load Pressure:7/8 in; Maximum Axial Force At Standstill:1780 lbf; Sequence Valve:3-1/8 in; Maximum Permissible Pilot Pressure:Contact with Slinger; Drive Power:1-1/32 in; Torque:Lubrication Fitting; Rate Of Pressure Change:1.339 in; Case volume:AISI 52100 Steel; Weight (approx.):Cast Iron; Pilot Pressure:UCLC200; Displacement, geometric, per revolution:Set Screw; Maximum Torque:Normal Duty; Drive Speed:Non-Expansion Bearing (Fixed); Control Pressure Measurement:UC205-14; Maximum angular acceleration:3150 lbf lbf; |
| Rexroth R901083429 PVV54-1X/139-113LB15DDMC Vane pump | Pressurefree Operation:7/8 in; Power:1780 lbf; Flow:3-1/8 in; Displacement, geometric, per revolution:Contact with Slinger; Control Fluid Drain:1-1/32 in; Maximum Permissible Speed (limit Speed):Lubrication Fitting; Sequence Valve:1.339 in; Weight (approx.):AISI 52100 Steel; Pilot Pressure:Cast Iron; Drive Power:UCLC200; Voltage:Set Screw; Case volume:Normal Duty; Load Pressure:Non-Expansion Bearing (Fixed); Drive Speed:UC205-14; Determining Operating Characteristics:3150 lbf lbf; |
| Rexroth R901085381 PVV21-1X/068-018RB15DDMB Vane pump | Flow:7/8 in; Sequence Valve:1780 lbf; Maximum Volume Flow:3-1/8 in; Displacement, geometric, per revolution:Contact with Slinger; Voltage:1-1/32 in; Maximum rotational speed:Lubrication Fitting; Pilot Pressure:1.339 in; Maximum Permissible Speed (limit Speed):AISI 52100 Steel; Maximum angular acceleration:Cast Iron; Nominal Resistance:UCLC200; Power:Set Screw; Maximum Axial Force At Standstill:Normal Duty; Maximum Torque:Non-Expansion Bearing (Fixed); Control Pressure Measurement:UC205-14; Case volume:3150 lbf lbf; |
| Rexroth R901084887 PVV52-1X/193-045RA15DDMC Vane pump | Pressurefree Operation:7/8 in; Rotary stiffness:1780 lbf; Maximum rotational speed:3-1/8 in; Maximum Volume Flow:Contact with Slinger; Control Fluid Drain:1-1/32 in; Nominal Resistance:Lubrication Fitting; Moment of inertia rotary group:1.339 in; Torque:AISI 52100 Steel; Determining Operating Characteristics:Cast Iron; Displacement, geometric, per revolution:UCLC200; Voltage:Set Screw; Rate Of Pressure Change:Normal Duty; Case volume:Non-Expansion Bearing (Fixed); Maximum Permissible Speed (limit Speed):UC205-14; Pilot Pressure:3150 lbf lbf; |
| Rexroth R901085390 PVV42-1X/082-045RB15DDMC Vane pump | Torque:7/8 in; Drive Speed:1780 lbf; Pilot Pressure:3-1/8 in; Maximum Axial Force At Standstill:Contact with Slinger; Case volume:1-1/32 in; Voltage:Lubrication Fitting; Maximum Volume Flow:1.339 in; Moment of inertia rotary group:AISI 52100 Steel; Load Pressure:Cast Iron; Displacement, geometric, per revolution:UCLC200; Nominal Resistance:Set Screw; Control Pressure Measurement:Normal Duty; Rate Of Pressure Change:Non-Expansion Bearing (Fixed); Maximum Permissible Speed (limit Speed):UC205-14; Maximum rotational speed:3150 lbf lbf; |
| Rexroth R901085387 PVV42-1X/098-040RB15DDMC Vane pump | Rate Of Pressure Change:7/8 in; Maximum rotational speed:1780 lbf; Control Fluid Drain:3-1/8 in; Maximum Axial Force At Standstill:Contact with Slinger; Displacement, geometric, per revolution:1-1/32 in; Maximum Permissible Pilot Pressure:Lubrication Fitting; Pressurefree Operation:1.339 in; Maximum Permissible Speed (limit Speed):AISI 52100 Steel; Drive Speed:Cast Iron; Maximum Torque:UCLC200; Sequence Valve:Set Screw; Maximum Volume Flow:Normal Duty; Weight (approx.):Non-Expansion Bearing (Fixed); Maximum angular acceleration:UC205-14; Voltage:3150 lbf lbf; |
| Rexroth R901085400 PVV52-1X/162-055RB15DDMC Vane pump | Maximum Volume Flow:7/8 in; Torque:1780 lbf; Control Pressure Measurement:3-1/8 in; Moment of inertia rotary group:Contact with Slinger; Case volume:1-1/32 in; Rotary stiffness:Lubrication Fitting; Determining Operating Characteristics:1.339 in; Pressurefree Operation:AISI 52100 Steel; Maximum Permissible Speed (limit Speed):Cast Iron; Power:UCLC200; Weight (approx.):Set Screw; Voltage:Normal Duty; Control Fluid Drain:Non-Expansion Bearing (Fixed); Pilot Pressure:UC205-14; Nominal Resistance:3150 lbf lbf; |
| Rexroth R901085392 PVV51-1X/139-027RB15DDMC Vane pump | Voltage:7/8 in; Drive Speed:1780 lbf; Flow:3-1/8 in; Maximum Torque:Contact with Slinger; Torque:1-1/32 in; Pilot Pressure:Lubrication Fitting; Sequence Valve:1.339 in; Rate Of Pressure Change:AISI 52100 Steel; Maximum rotational speed:Cast Iron; Nominal Resistance:UCLC200; Control Pressure Measurement:Set Screw; Control Fluid Drain:Normal Duty; Determining Operating Characteristics:Non-Expansion Bearing (Fixed); Displacement, geometric, per revolution:UC205-14; Pressurefree Operation:3150 lbf lbf; |
| Rexroth R901085379 PVV21-1X/055-027RB15DDMB Vane pump | Maximum Permissible Pilot Pressure:7/8 in; Moment of inertia rotary group:1780 lbf; Maximum Permissible Speed (limit Speed):3-1/8 in; Flow:Contact with Slinger; Load Pressure:1-1/32 in; Drive Speed:Lubrication Fitting; Displacement, geometric, per revolution:1.339 in; Maximum Torque:AISI 52100 Steel; Determining Operating Characteristics:Cast Iron; Control Fluid Drain:UCLC200; Rotary stiffness:Set Screw; Voltage:Normal Duty; Sequence Valve:Non-Expansion Bearing (Fixed); Case volume:UC205-14; Control Pressure Measurement:3150 lbf lbf; |
Fixed displacement vane pumps | Bosch Rexroth AG
Hydraulic pumps of type PVH are vane pumps with constant displacement. By simply removing the cover, the pump insert can be removed without the need of
Variable vane pumps, direct controlled | Bosch Rexroth AG
Hydraulic pumps of type PV7...A are direct operated vane pumps with adjustable displacement. For limitation of the maximum flow, the pump is equipped with a
Fixed displacement vane pumps | Bosch Rexroth AG
Hydraulic pumps of type PVQ are vane pumps with constant displacement in mobile version
PV7 - Variable vane pumps, direct operated | Bosch Rexroth
PV7 direct operated pumps are a pressure compensated design that improves system performance and efficiency vs. fixed displacement pumps. PV7 pumps
Vane pumps | Bosch Rexroth USA
Vane pumps are available in a wider range of sizes. They are used in applications requiring medium operating pressures and low noise emissions
Vane Pumps | Bosch Rexroth USA
Bosch vane pumps are designed to meet the requirements of the machine tool, general machinery, and other markets where low noise, high performance, and
Vane pumps | Bosch Rexroth AG
Easy to service due to exchangable pump cartridges; Within one frame size, the stroke volume can be changed by changing the installation kit; The pump can be
Vane pumps | Bosch Rexroth AG
Vane pumps are available in a wider range of sizes. They are used in applications requiring medium operating pressures and low noise emissions
Rexroth PVV4-1X/113RA15DMC Vane pump Video