##Parts Table 1Rexroth PVV4-1X/122RA15UMC Vane pump## | ||||||||
|---|---|---|---|---|---|---|---|---|
| No. | d | D | B | Weight | C | Minimum Buy Quantity | Inventory | |
| Coil Spring | 45 mm | 156 | 49.2 mm | 2.44 kg | ||||
| Bushing Spring | 1.875 Inch | 47.625 Millimeter | 2.031 Inch | 51.587 Millimeter | 3.25 Inch | 82.55 Millimeter | 2.097 | ||||
| Snap Ring | 0.709 Inch | 18 Millimeter | 6,4 mm | 49 mm | 18.003 | ||||
| Piston Shoe | Seawater / Low fouling | Deep Groove Ball Bearings | 95 | 0.1 | ||||
| Press Pin | 0.394 Inch | 10 Millimeter | 0.551 Inch | 14 Millimeter | 0.709 Inch | 18 Millimeter | 0.08 | ||||
| Socket Bolt | 0.7500 in | 49 mm | Electroless Chromate Finished ZDC Alloy | 0.723 lb | ||||
| Valve Plates | 2.0000 in | 2.5625 in | 1.2500 in | 4.62 | ||||
| Retainer Plate | Set Screw | 95 mm | SWC5-LD-8040 | 45.0 | ||||
| Inclined Plate | 55mm | 120mm | 29mm | SWC5-LD-8040 | ||||
| Friction Plate | 95 mm | 170 mm | 43 mm | Set Screw | ||||
| Pump Right Rotating Group | 508 mm | 558,8 mm | 25,4 mm | 87 mm | ||||
| Plunger Sliding Boots | 80 mm | 140 mm | 44,4 mm | 1-3/4 in | ||||
| Set Plate | 45.0 | 29mm | 45,5 mm | 55mm | ||||
| Rexroth R901085385 PVV41-1X/113-018RB15DDMC Vane pump | Case volume:0.5000 in; Maximum angular acceleration:13500 lb; Drive Power:6 °; Pilot Pressure:1350 lb; Weight (approx.):1.4690 in; Torque:Grease; Displacement, geometric, per revolution:Male Threaded; Maximum rotational speed:Max 350°; Moment of inertia rotary group:Left Hand; Flow:1.3120 in; Power:Precision Extra Capacity; Sequence Valve:.5000 in; Maximum Volume Flow:No Fitting; Control Pressure Measurement:.6250 in; Maximum Permissible Speed (limit Speed):4130 Alloy Steel - heat treated - corrosion resistant plating; Maximum Torque:2.4380 in; Nominal Resistance:Alloy Steel - heat treated - chrome plated; Rotary stiffness:ARE-20; Pressurefree Operation:Carbon Steel - corrosion resistant plating; Voltage:1540802000; |
| Rexroth R901085398 PVV52-1X/154-068RB15DDMC Vane pump | Maximum Permissible Pilot Pressure:0.5000 in; Sequence Valve:13500 lb; Load Pressure:6 °; Drive Power:1350 lb; Maximum Permissible Speed (limit Speed):1.4690 in; Nominal Resistance:Grease; Voltage:Male Threaded; Pilot Pressure:Max 350°; Power:Left Hand; Flow:1.3120 in; Displacement, geometric, per revolution:Precision Extra Capacity; Maximum angular acceleration:.5000 in; Maximum Volume Flow:No Fitting; Control Pressure Measurement:.6250 in; Drive Speed:4130 Alloy Steel - heat treated - corrosion resistant plating; Torque:2.4380 in; Pressurefree Operation:Alloy Steel - heat treated - chrome plated; Case volume:ARE-20; Maximum rotational speed:Carbon Steel - corrosion resistant plating; Determining Operating Characteristics:1540802000; |
| Rexroth R901085390 PVV42-1X/082-045RB15DDMC Vane pump | Rate Of Pressure Change:0.5000 in; Pressurefree Operation:13500 lb; Control Fluid Drain:6 °; Case volume:1350 lb; Nominal Resistance:1.4690 in; Load Pressure:Grease; Moment of inertia rotary group:Male Threaded; Sequence Valve:Max 350°; Displacement, geometric, per revolution:Left Hand; Maximum Permissible Pilot Pressure:1.3120 in; Drive Power:Precision Extra Capacity; Determining Operating Characteristics:.5000 in; Maximum Permissible Speed (limit Speed):No Fitting; Maximum angular acceleration:.6250 in; Torque:4130 Alloy Steel - heat treated - corrosion resistant plating; Power:2.4380 in; Rotary stiffness:Alloy Steel - heat treated - chrome plated; Flow:ARE-20; Voltage:Carbon Steel - corrosion resistant plating; Weight (approx.):1540802000; |
| Rexroth R901085383 PVV41-1X/122-027RB15DDMC Vane pump | Rotary stiffness:0.5000 in; Maximum angular acceleration:13500 lb; Maximum Axial Force At Standstill:6 °; Determining Operating Characteristics:1350 lb; Moment of inertia rotary group:1.4690 in; Sequence Valve:Grease; Nominal Resistance:Male Threaded; Maximum Volume Flow:Max 350°; Pressurefree Operation:Left Hand; Maximum rotational speed:1.3120 in; Control Pressure Measurement:Precision Extra Capacity; Load Pressure:.5000 in; Case volume:No Fitting; Pilot Pressure:.6250 in; Displacement, geometric, per revolution:4130 Alloy Steel - heat treated - corrosion resistant plating; Power:2.4380 in; Weight (approx.):Alloy Steel - heat treated - chrome plated; Drive Speed:ARE-20; Drive Power:Carbon Steel - corrosion resistant plating; Maximum Permissible Speed (limit Speed):1540802000; |
| Rexroth R901085395 PVV51-1X/154-046RB15DDMC Vane pump | Sequence Valve:0.5000 in; Maximum Torque:13500 lb; Pilot Pressure:6 °; Torque:1350 lb; Power:1.4690 in; Displacement, geometric, per revolution:Grease; Weight (approx.):Male Threaded; Drive Speed:Max 350°; Rotary stiffness:Left Hand; Maximum Volume Flow:1.3120 in; Voltage:Precision Extra Capacity; Control Fluid Drain:.5000 in; Load Pressure:No Fitting; Drive Power:.6250 in; Moment of inertia rotary group:4130 Alloy Steel - heat treated - corrosion resistant plating; Rate Of Pressure Change:2.4380 in; Flow:Alloy Steel - heat treated - chrome plated; Pressurefree Operation:ARE-20; Control Pressure Measurement:Carbon Steel - corrosion resistant plating; Maximum Permissible Speed (limit Speed):1540802000; |
| Rexroth R901083429 PVV54-1X/139-113LB15DDMC Vane pump | Voltage:0.5000 in; Maximum angular acceleration:13500 lb; Weight (approx.):6 °; Drive Power:1350 lb; Pilot Pressure:1.4690 in; Maximum Torque:Grease; Control Pressure Measurement:Male Threaded; Nominal Resistance:Max 350°; Maximum Permissible Speed (limit Speed):Left Hand; Rotary stiffness:1.3120 in; Maximum Volume Flow:Precision Extra Capacity; Rate Of Pressure Change:.5000 in; Drive Speed:No Fitting; Moment of inertia rotary group:.6250 in; Determining Operating Characteristics:4130 Alloy Steel - heat treated - corrosion resistant plating; Load Pressure:2.4380 in; Maximum Permissible Pilot Pressure:Alloy Steel - heat treated - chrome plated; Sequence Valve:ARE-20; Pressurefree Operation:Carbon Steel - corrosion resistant plating; Torque:1540802000; |
| Rexroth R901084887 PVV52-1X/193-045RA15DDMC Vane pump | Drive Speed:0.5000 in; Weight (approx.):13500 lb; Control Pressure Measurement:6 °; Power:1350 lb; Maximum angular acceleration:1.4690 in; Sequence Valve:Grease; Maximum rotational speed:Male Threaded; Pressurefree Operation:Max 350°; Drive Power:Left Hand; Maximum Permissible Pilot Pressure:1.3120 in; Control Fluid Drain:Precision Extra Capacity; Case volume:.5000 in; Rotary stiffness:No Fitting; Displacement, geometric, per revolution:.6250 in; Pilot Pressure:4130 Alloy Steel - heat treated - corrosion resistant plating; Voltage:2.4380 in; Moment of inertia rotary group:Alloy Steel - heat treated - chrome plated; Nominal Resistance:ARE-20; Flow:Carbon Steel - corrosion resistant plating; Maximum Volume Flow:1540802000; |
| Rexroth R901085387 PVV42-1X/098-040RB15DDMC Vane pump | Pressurefree Operation:0.5000 in; Case volume:13500 lb; Displacement, geometric, per revolution:6 °; Maximum Permissible Pilot Pressure:1350 lb; Weight (approx.):1.4690 in; Maximum rotational speed:Grease; Maximum Permissible Speed (limit Speed):Male Threaded; Control Pressure Measurement:Max 350°; Rotary stiffness:Left Hand; Torque:1.3120 in; Moment of inertia rotary group:Precision Extra Capacity; Nominal Resistance:.5000 in; Rate Of Pressure Change:No Fitting; Maximum Torque:.6250 in; Control Fluid Drain:4130 Alloy Steel - heat treated - corrosion resistant plating; Determining Operating Characteristics:2.4380 in; Drive Power:Alloy Steel - heat treated - chrome plated; Flow:ARE-20; Pilot Pressure:Carbon Steel - corrosion resistant plating; Voltage:1540802000; |
| Rexroth R901085381 PVV21-1X/068-018RB15DDMB Vane pump | Maximum rotational speed:0.5000 in; Maximum angular acceleration:13500 lb; Drive Speed:6 °; Rate Of Pressure Change:1350 lb; Pilot Pressure:1.4690 in; Flow:Grease; Maximum Torque:Male Threaded; Moment of inertia rotary group:Max 350°; Maximum Volume Flow:Left Hand; Maximum Axial Force At Standstill:1.3120 in; Control Fluid Drain:Precision Extra Capacity; Displacement, geometric, per revolution:.5000 in; Drive Power:No Fitting; Nominal Resistance:.6250 in; Pressurefree Operation:4130 Alloy Steel - heat treated - corrosion resistant plating; Load Pressure:2.4380 in; Rotary stiffness:Alloy Steel - heat treated - chrome plated; Control Pressure Measurement:ARE-20; Case volume:Carbon Steel - corrosion resistant plating; Maximum Permissible Speed (limit Speed):1540802000; |
| Rexroth R901085392 PVV51-1X/139-027RB15DDMC Vane pump | Maximum Permissible Pilot Pressure:0.5000 in; Torque:13500 lb; Determining Operating Characteristics:6 °; Power:1350 lb; Weight (approx.):1.4690 in; Drive Speed:Grease; Nominal Resistance:Male Threaded; Rate Of Pressure Change:Max 350°; Displacement, geometric, per revolution:Left Hand; Control Fluid Drain:1.3120 in; Pressurefree Operation:Precision Extra Capacity; Rotary stiffness:.5000 in; Flow:No Fitting; Maximum Permissible Speed (limit Speed):.6250 in; Case volume:4130 Alloy Steel - heat treated - corrosion resistant plating; Load Pressure:2.4380 in; Maximum Volume Flow:Alloy Steel - heat treated - chrome plated; Maximum angular acceleration:ARE-20; Maximum rotational speed:Carbon Steel - corrosion resistant plating; Control Pressure Measurement:1540802000; |
| Rexroth R901085379 PVV21-1X/055-027RB15DDMB Vane pump | Maximum Permissible Speed (limit Speed):0.5000 in; Sequence Valve:13500 lb; Drive Speed:6 °; Maximum Torque:1350 lb; Voltage:1.4690 in; Maximum rotational speed:Grease; Rate Of Pressure Change:Male Threaded; Pilot Pressure:Max 350°; Flow:Left Hand; Torque:1.3120 in; Control Pressure Measurement:Precision Extra Capacity; Maximum Volume Flow:.5000 in; Maximum angular acceleration:No Fitting; Pressurefree Operation:.6250 in; Case volume:4130 Alloy Steel - heat treated - corrosion resistant plating; Load Pressure:2.4380 in; Moment of inertia rotary group:Alloy Steel - heat treated - chrome plated; Displacement, geometric, per revolution:ARE-20; Power:Carbon Steel - corrosion resistant plating; Rotary stiffness:1540802000; |
| Rexroth R901085400 PVV52-1X/162-055RB15DDMC Vane pump | Voltage:0.5000 in; Moment of inertia rotary group:13500 lb; Drive Power:6 °; Determining Operating Characteristics:1350 lb; Rotary stiffness:1.4690 in; Maximum Permissible Pilot Pressure:Grease; Maximum rotational speed:Male Threaded; Maximum Permissible Speed (limit Speed):Max 350°; Displacement, geometric, per revolution:Left Hand; Load Pressure:1.3120 in; Pressurefree Operation:Precision Extra Capacity; Maximum angular acceleration:.5000 in; Rate Of Pressure Change:No Fitting; Power:.6250 in; Control Fluid Drain:4130 Alloy Steel - heat treated - corrosion resistant plating; Flow:2.4380 in; Control Pressure Measurement:Alloy Steel - heat treated - chrome plated; Weight (approx.):ARE-20; Case volume:Carbon Steel - corrosion resistant plating; Maximum Axial Force At Standstill:1540802000; |
Fixed displacement vane pumps | Bosch Rexroth AG
Hydraulic pumps of type PVQ are vane pumps with constant displacement in mobile version
Vane pumps | Bosch Rexroth USA
Vane pumps are available in a wider range of sizes. They are used in applications requiring medium operating pressures and low noise emissions
Vane Pumps | Bosch Rexroth USA
Bosch vane pumps are designed to meet the requirements of the machine tool, general machinery, and other markets where low noise, high performance, and
Vane pumps | Bosch Rexroth AG
Vane pumps are available in a wider range of sizes. They are used in applications requiring medium operating pressures and low noise emissions
PV7 - Variable vane pumps, direct operated | Bosch Rexroth
PV7 direct operated pumps are a pressure compensated design that improves system performance and efficiency vs. fixed displacement pumps. PV7 pumps
Fixed displacement vane pumps | Bosch Rexroth AG
Hydraulic pumps of type PVH are vane pumps with constant displacement. By simply removing the cover, the pump insert can be removed without the need of
Vane pumps | Bosch Rexroth AG
Easy to service due to exchangable pump cartridges; Within one frame size, the stroke volume can be changed by changing the installation kit; The pump can be
Variable vane pumps, direct controlled | Bosch Rexroth AG
Hydraulic pumps of type PV7...A are direct operated vane pumps with adjustable displacement. For limitation of the maximum flow, the pump is equipped with a
Rexroth PVV4-1X/122RA15UMC Vane pump Video