##Parts Table 1Rexroth PVV4-1X/098RA15DMC Vane pump## | ||||||||
|---|---|---|---|---|---|---|---|---|
| No. | d | D | B | Weight | Inventory | Minimum Buy Quantity | C | |
| Seal Kits | 30.16 mm | 40 mm | 5 mm | Round | ||||
| Central Shaft | 35 mm | 80 mm | 27 mm | 38x72x40 | ||||
| Cylinder | 38 mm | 72 mm | 40 mm | 42 mm | ||||
| Cylinder Block | 30.16 mm | 62 mm | 30 mm | 0.25 kg | ||||
| Valve Plates | 1.1 mm | Bearing | 0.026 | 0.722 | ||||
| Push Rod | 0.472 Inch | 12 Millimeter | 1.102 Inch | 28 Millimeter | CX356 | 0.023 | ||||
| Shoe Plates | 1 (Single) | 50MM Bore; 110MM Outside Diameter; 27MM Width; Open; No Flush Ground; Ball Bearing; Single Row of Balls; ABEC 1 | ISO P0; No Filling Slot; No Snap Ring; C0-Medium; Steel Cage; 40 Degree; 1 (Single) | 713883 | - | ||||
| Block Springs | 0.865 kN | Non-Expansion Bearing (Fixed) | 0.5000 in | - | ||||
| Cylinder Blocks | 50 | 4.331 Inch | 110 Millimeter | 1.063 Inch | 27 Millimeter | 1.15 | ||||
| Plunger Sliding Boots | 2.1875 in | 62 | 0.722 | 72 | ||||
| The Thrust Plate | 2.0000 in | 4.0700 in | 3.1800 in | 11 lbs | ||||
| Ball Guide | 8 mm | 15 mm | 17,5 mm | 16 | ||||
| Bearing Plate | 30 mm | 62 mm | 16 mm | 45,5 mm | ||||
| Guide Ball | 31171504 | 40 | 100 | 11 lbs | ||||
| Rexroth R901085385 PVV41-1X/113-018RB15DDMC Vane pump | Determining Operating Characteristics:60 mm; Maximum angular acceleration:With Snap Ring; Drive Speed:130 mm; Control Fluid Drain:130000 N; Sequence Valve:2.1250 in; Maximum Permissible Pilot Pressure:120 °C; Moment of inertia rotary group:25 °; Maximum Axial Force At Standstill:Polyamide Cage; Pressurefree Operation:Double-Row Non-Fill Slot; Control Pressure Measurement:Uncoated; Rate Of Pressure Change:C3; Maximum rotational speed:ABEC1, P0; Load Pressure:Round; Drive Power:2.1 mm; Rotary stiffness:Shielded; Maximum Permissible Speed (limit Speed):5300; |
| Rexroth R901085390 PVV42-1X/082-045RB15DDMC Vane pump | Sequence Valve:60 mm; Control Pressure Measurement:With Snap Ring; Power:130 mm; Maximum Torque:130000 N; Determining Operating Characteristics:2.1250 in; Rate Of Pressure Change:120 °C; Control Fluid Drain:25 °; Drive Power:Polyamide Cage; Moment of inertia rotary group:Double-Row Non-Fill Slot; Case volume:Uncoated; Torque:C3; Displacement, geometric, per revolution:ABEC1, P0; Voltage:Round; Maximum Axial Force At Standstill:2.1 mm; Maximum Permissible Pilot Pressure:Shielded; Load Pressure:5300; |
| Rexroth R901085379 PVV21-1X/055-027RB15DDMB Vane pump | Moment of inertia rotary group:60 mm; Maximum rotational speed:With Snap Ring; Drive Power:130 mm; Maximum Permissible Pilot Pressure:130000 N; Sequence Valve:2.1250 in; Nominal Resistance:120 °C; Displacement, geometric, per revolution:25 °; Control Fluid Drain:Polyamide Cage; Power:Double-Row Non-Fill Slot; Load Pressure:Uncoated; Maximum Permissible Speed (limit Speed):C3; Voltage:ABEC1, P0; Drive Speed:Round; Determining Operating Characteristics:2.1 mm; Pilot Pressure:Shielded; Case volume:5300; |
| Rexroth R901085387 PVV42-1X/098-040RB15DDMC Vane pump | Pilot Pressure:60 mm; Maximum angular acceleration:With Snap Ring; Control Pressure Measurement:130 mm; Sequence Valve:130000 N; Moment of inertia rotary group:2.1250 in; Maximum Permissible Speed (limit Speed):120 °C; Nominal Resistance:25 °; Rotary stiffness:Polyamide Cage; Torque:Double-Row Non-Fill Slot; Power:Uncoated; Determining Operating Characteristics:C3; Flow:ABEC1, P0; Load Pressure:Round; Maximum rotational speed:2.1 mm; Pressurefree Operation:Shielded; Drive Speed:5300; |
| Rexroth R901085398 PVV52-1X/154-068RB15DDMC Vane pump | Determining Operating Characteristics:60 mm; Flow:With Snap Ring; Pressurefree Operation:130 mm; Weight (approx.):130000 N; Maximum Axial Force At Standstill:2.1250 in; Pilot Pressure:120 °C; Maximum Volume Flow:25 °; Rate Of Pressure Change:Polyamide Cage; Sequence Valve:Double-Row Non-Fill Slot; Maximum Permissible Speed (limit Speed):Uncoated; Voltage:C3; Load Pressure:ABEC1, P0; Control Fluid Drain:Round; Control Pressure Measurement:2.1 mm; Moment of inertia rotary group:Shielded; Maximum Torque:5300; |
| Rexroth R901083429 PVV54-1X/139-113LB15DDMC Vane pump | Maximum Torque:60 mm; Maximum Volume Flow:With Snap Ring; Rate Of Pressure Change:130 mm; Torque:130000 N; Rotary stiffness:2.1250 in; Control Pressure Measurement:120 °C; Maximum Permissible Pilot Pressure:25 °; Voltage:Polyamide Cage; Maximum rotational speed:Double-Row Non-Fill Slot; Moment of inertia rotary group:Uncoated; Maximum Permissible Speed (limit Speed):C3; Pilot Pressure:ABEC1, P0; Flow:Round; Weight (approx.):2.1 mm; Displacement, geometric, per revolution:Shielded; Power:5300; |
| Rexroth R901085395 PVV51-1X/154-046RB15DDMC Vane pump | Rotary stiffness:60 mm; Voltage:With Snap Ring; Load Pressure:130 mm; Maximum Permissible Speed (limit Speed):130000 N; Determining Operating Characteristics:2.1250 in; Maximum Torque:120 °C; Weight (approx.):25 °; Maximum angular acceleration:Polyamide Cage; Maximum Permissible Pilot Pressure:Double-Row Non-Fill Slot; Drive Speed:Uncoated; Control Fluid Drain:C3; Case volume:ABEC1, P0; Pressurefree Operation:Round; Maximum Axial Force At Standstill:2.1 mm; Maximum Volume Flow:Shielded; Rate Of Pressure Change:5300; |
| Rexroth R901085392 PVV51-1X/139-027RB15DDMC Vane pump | Maximum angular acceleration:60 mm; Rotary stiffness:With Snap Ring; Maximum rotational speed:130 mm; Determining Operating Characteristics:130000 N; Rate Of Pressure Change:2.1250 in; Maximum Axial Force At Standstill:120 °C; Pilot Pressure:25 °; Case volume:Polyamide Cage; Torque:Double-Row Non-Fill Slot; Sequence Valve:Uncoated; Maximum Torque:C3; Power:ABEC1, P0; Control Fluid Drain:Round; Displacement, geometric, per revolution:2.1 mm; Maximum Permissible Pilot Pressure:Shielded; Drive Power:5300; |
| Rexroth R901085383 PVV41-1X/122-027RB15DDMC Vane pump | Pressurefree Operation:60 mm; Displacement, geometric, per revolution:With Snap Ring; Flow:130 mm; Determining Operating Characteristics:130000 N; Case volume:2.1250 in; Maximum Permissible Pilot Pressure:120 °C; Maximum angular acceleration:25 °; Torque:Polyamide Cage; Maximum Volume Flow:Double-Row Non-Fill Slot; Rotary stiffness:Uncoated; Control Pressure Measurement:C3; Moment of inertia rotary group:ABEC1, P0; Rate Of Pressure Change:Round; Nominal Resistance:2.1 mm; Maximum rotational speed:Shielded; Load Pressure:5300; |
| Rexroth R901085381 PVV21-1X/068-018RB15DDMB Vane pump | Pressurefree Operation:60 mm; Maximum Permissible Pilot Pressure:With Snap Ring; Control Fluid Drain:130 mm; Maximum Axial Force At Standstill:130000 N; Flow:2.1250 in; Rate Of Pressure Change:120 °C; Power:25 °; Voltage:Polyamide Cage; Maximum Permissible Speed (limit Speed):Double-Row Non-Fill Slot; Maximum rotational speed:Uncoated; Weight (approx.):C3; Displacement, geometric, per revolution:ABEC1, P0; Nominal Resistance:Round; Control Pressure Measurement:2.1 mm; Moment of inertia rotary group:Shielded; Sequence Valve:5300; |
| Rexroth R901084887 PVV52-1X/193-045RA15DDMC Vane pump | Maximum Torque:60 mm; Maximum Volume Flow:With Snap Ring; Nominal Resistance:130 mm; Load Pressure:130000 N; Displacement, geometric, per revolution:2.1250 in; Pressurefree Operation:120 °C; Maximum Axial Force At Standstill:25 °; Voltage:Polyamide Cage; Maximum Permissible Pilot Pressure:Double-Row Non-Fill Slot; Weight (approx.):Uncoated; Maximum Permissible Speed (limit Speed):C3; Power:ABEC1, P0; Maximum angular acceleration:Round; Torque:2.1 mm; Rate Of Pressure Change:Shielded; Drive Power:5300; |
| Rexroth R901085400 PVV52-1X/162-055RB15DDMC Vane pump | Drive Speed:60 mm; Flow:With Snap Ring; Case volume:130 mm; Weight (approx.):130000 N; Voltage:2.1250 in; Power:120 °C; Maximum rotational speed:25 °; Nominal Resistance:Polyamide Cage; Rate Of Pressure Change:Double-Row Non-Fill Slot; Maximum Axial Force At Standstill:Uncoated; Maximum Permissible Pilot Pressure:C3; Control Pressure Measurement:ABEC1, P0; Rotary stiffness:Round; Displacement, geometric, per revolution:2.1 mm; Maximum Volume Flow:Shielded; Load Pressure:5300; |
Variable vane pumps, direct controlled | Bosch Rexroth AG
Hydraulic pumps of type PV7...A are direct operated vane pumps with adjustable displacement. For limitation of the maximum flow, the pump is equipped with a
Vane pumps | Bosch Rexroth USA
Vane pumps are available in a wider range of sizes. They are used in applications requiring medium operating pressures and low noise emissions
Vane Pumps | Bosch Rexroth USA
Bosch vane pumps are designed to meet the requirements of the machine tool, general machinery, and other markets where low noise, high performance, and
Fixed displacement vane pumps | Bosch Rexroth AG
Hydraulic pumps of type PVQ are vane pumps with constant displacement in mobile version
Vane pumps | Bosch Rexroth AG
Vane pumps are available in a wider range of sizes. They are used in applications requiring medium operating pressures and low noise emissions
Vane pumps | Bosch Rexroth AG
Easy to service due to exchangable pump cartridges; Within one frame size, the stroke volume can be changed by changing the installation kit; The pump can be
Fixed displacement vane pumps | Bosch Rexroth AG
Hydraulic pumps of type PVH are vane pumps with constant displacement. By simply removing the cover, the pump insert can be removed without the need of
PV7 - Variable vane pumps, direct operated | Bosch Rexroth
PV7 direct operated pumps are a pressure compensated design that improves system performance and efficiency vs. fixed displacement pumps. PV7 pumps
Rexroth PVV4-1X/098RA15DMC Vane pump Video