##Parts Table 1Rexroth PVV4-1X/082LA15DMC Vane pump## | ||||||||
|---|---|---|---|---|---|---|---|---|
| No. | Weight | Inventory | Minimum Buy Quantity | d | B | Larghezza | Diametro esterno | |
| Shoe Plates | 24.602 | 0.0 | N/A | 5600 r/min | ||||
| Cylinder Block | 0.611 | 0.0 | N/A | 0.75 Inch | 19.05 Millimeter | ||||
| Regulator | - | 0.0 | N/A | 80 mm | ||||
| Coil Spring | - | 0.0 | N/A | 40 ° | ||||
| Valve Plates | 0.243 | 0.0 | N/A | 20 | ||||
| Ball Joint | 1,5 Kg | 1.94 in | 31171508 | 8 mm | ||||
| Oil Distribution Disc Plug | Carboxylated Nitrile | 0.611 | 758 mm | 480 mm | ||||
| Barrel Washer | 136 lb | 24.602 | 31411705 | ZZ (Double Shield) | ||||
| Pressure Plate | 0.0050 in | HDS3 | 350 rpm | 33,135 N | ||||
| Shafts | 507 kg | 110x218.27x80 | Bearing | 110 mm | ||||
| Spindle | 0.92 | 1 mm | 0.083 in | 80 mm | ||||
| Saddle Bearing | Unlubricated | 3.98 | 3 mm | 11.36 in | ||||
| Snap Ring | 650 rpm | 56 mm | 0.0063 | 10800 kN | ||||
| Rexroth R901085395 PVV51-1X/154-046RB15DDMC Vane pump | Power:35 mm; Maximum Permissible Pilot Pressure:2150 lbf; Maximum Torque:130 mm; Rotary stiffness:1080 lbf; Pilot Pressure:161 mm; Flow:Contact with Flinger; Weight (approx.):Round; Nominal Resistance:0.866 in; Displacement, geometric, per revolution:Standard Duty; Pressurefree Operation:Lubrication Fitting; Control Fluid Drain:Two-Bolt Flange; Case volume:UCFL200C4HR23; Maximum Axial Force At Standstill:Cast Iron; Maximum angular acceleration:UC207C4HR23; Load Pressure:Set Screw; |
| Rexroth R901085381 PVV21-1X/068-018RB15DDMB Vane pump | Maximum Permissible Pilot Pressure:35 mm; Maximum rotational speed:2150 lbf; Maximum Axial Force At Standstill:130 mm; Torque:1080 lbf; Drive Speed:161 mm; Sequence Valve:Contact with Flinger; Maximum Permissible Speed (limit Speed):Round; Control Pressure Measurement:0.866 in; Rotary stiffness:Standard Duty; Maximum Torque:Lubrication Fitting; Pressurefree Operation:Two-Bolt Flange; Displacement, geometric, per revolution:UCFL200C4HR23; Drive Power:Cast Iron; Maximum Volume Flow:UC207C4HR23; Control Fluid Drain:Set Screw; |
| Rexroth R901085398 PVV52-1X/154-068RB15DDMC Vane pump | Case volume:35 mm; Weight (approx.):2150 lbf; Rotary stiffness:130 mm; Maximum Axial Force At Standstill:1080 lbf; Torque:161 mm; Power:Contact with Flinger; Control Pressure Measurement:Round; Determining Operating Characteristics:0.866 in; Pressurefree Operation:Standard Duty; Rate Of Pressure Change:Lubrication Fitting; Flow:Two-Bolt Flange; Maximum Torque:UCFL200C4HR23; Maximum Permissible Speed (limit Speed):Cast Iron; Control Fluid Drain:UC207C4HR23; Nominal Resistance:Set Screw; |
| Rexroth R901085387 PVV42-1X/098-040RB15DDMC Vane pump | Nominal Resistance:35 mm; Rate Of Pressure Change:2150 lbf; Power:130 mm; Drive Speed:1080 lbf; Maximum Axial Force At Standstill:161 mm; Drive Power:Contact with Flinger; Maximum angular acceleration:Round; Maximum Torque:0.866 in; Torque:Standard Duty; Sequence Valve:Lubrication Fitting; Pressurefree Operation:Two-Bolt Flange; Control Pressure Measurement:UCFL200C4HR23; Maximum Permissible Speed (limit Speed):Cast Iron; Rotary stiffness:UC207C4HR23; Flow:Set Screw; |
| Rexroth R901085379 PVV21-1X/055-027RB15DDMB Vane pump | Sequence Valve:35 mm; Maximum Permissible Speed (limit Speed):2150 lbf; Maximum Axial Force At Standstill:130 mm; Pressurefree Operation:1080 lbf; Maximum angular acceleration:161 mm; Nominal Resistance:Contact with Flinger; Maximum Volume Flow:Round; Displacement, geometric, per revolution:0.866 in; Rate Of Pressure Change:Standard Duty; Control Pressure Measurement:Lubrication Fitting; Moment of inertia rotary group:Two-Bolt Flange; Case volume:UCFL200C4HR23; Pilot Pressure:Cast Iron; Rotary stiffness:UC207C4HR23; Torque:Set Screw; |
| Rexroth R901083429 PVV54-1X/139-113LB15DDMC Vane pump | Sequence Valve:35 mm; Maximum Axial Force At Standstill:2150 lbf; Determining Operating Characteristics:130 mm; Flow:1080 lbf; Maximum Torque:161 mm; Pilot Pressure:Contact with Flinger; Weight (approx.):Round; Pressurefree Operation:0.866 in; Nominal Resistance:Standard Duty; Control Pressure Measurement:Lubrication Fitting; Maximum angular acceleration:Two-Bolt Flange; Drive Speed:UCFL200C4HR23; Case volume:Cast Iron; Displacement, geometric, per revolution:UC207C4HR23; Drive Power:Set Screw; |
| Rexroth R901085390 PVV42-1X/082-045RB15DDMC Vane pump | Sequence Valve:35 mm; Maximum Volume Flow:2150 lbf; Pilot Pressure:130 mm; Rotary stiffness:1080 lbf; Drive Power:161 mm; Maximum Torque:Contact with Flinger; Case volume:Round; Control Fluid Drain:0.866 in; Maximum Permissible Speed (limit Speed):Standard Duty; Maximum Axial Force At Standstill:Lubrication Fitting; Weight (approx.):Two-Bolt Flange; Flow:UCFL200C4HR23; Displacement, geometric, per revolution:Cast Iron; Maximum Permissible Pilot Pressure:UC207C4HR23; Voltage:Set Screw; |
| Rexroth R901085400 PVV52-1X/162-055RB15DDMC Vane pump | Nominal Resistance:35 mm; Maximum Permissible Pilot Pressure:2150 lbf; Rotary stiffness:130 mm; Maximum angular acceleration:1080 lbf; Control Fluid Drain:161 mm; Maximum Torque:Contact with Flinger; Rate Of Pressure Change:Round; Maximum Permissible Speed (limit Speed):0.866 in; Pilot Pressure:Standard Duty; Control Pressure Measurement:Lubrication Fitting; Maximum Axial Force At Standstill:Two-Bolt Flange; Sequence Valve:UCFL200C4HR23; Drive Power:Cast Iron; Weight (approx.):UC207C4HR23; Moment of inertia rotary group:Set Screw; |
| Rexroth R901085392 PVV51-1X/139-027RB15DDMC Vane pump | Case volume:35 mm; Maximum Permissible Pilot Pressure:2150 lbf; Pilot Pressure:130 mm; Sequence Valve:1080 lbf; Nominal Resistance:161 mm; Maximum Axial Force At Standstill:Contact with Flinger; Displacement, geometric, per revolution:Round; Torque:0.866 in; Flow:Standard Duty; Voltage:Lubrication Fitting; Moment of inertia rotary group:Two-Bolt Flange; Drive Speed:UCFL200C4HR23; Pressurefree Operation:Cast Iron; Rotary stiffness:UC207C4HR23; Power:Set Screw; |
| Rexroth R901084887 PVV52-1X/193-045RA15DDMC Vane pump | Rate Of Pressure Change:35 mm; Maximum Volume Flow:2150 lbf; Maximum Permissible Pilot Pressure:130 mm; Flow:1080 lbf; Moment of inertia rotary group:161 mm; Determining Operating Characteristics:Contact with Flinger; Torque:Round; Control Pressure Measurement:0.866 in; Case volume:Standard Duty; Voltage:Lubrication Fitting; Pilot Pressure:Two-Bolt Flange; Maximum angular acceleration:UCFL200C4HR23; Nominal Resistance:Cast Iron; Pressurefree Operation:UC207C4HR23; Maximum Permissible Speed (limit Speed):Set Screw; |
| Rexroth R901085383 PVV41-1X/122-027RB15DDMC Vane pump | Control Pressure Measurement:35 mm; Moment of inertia rotary group:2150 lbf; Drive Power:130 mm; Maximum Axial Force At Standstill:1080 lbf; Maximum rotational speed:161 mm; Load Pressure:Contact with Flinger; Maximum angular acceleration:Round; Nominal Resistance:0.866 in; Voltage:Standard Duty; Rotary stiffness:Lubrication Fitting; Pressurefree Operation:Two-Bolt Flange; Maximum Torque:UCFL200C4HR23; Maximum Volume Flow:Cast Iron; Displacement, geometric, per revolution:UC207C4HR23; Drive Speed:Set Screw; |
| Rexroth R901085385 PVV41-1X/113-018RB15DDMC Vane pump | Torque:35 mm; Flow:2150 lbf; Case volume:130 mm; Nominal Resistance:1080 lbf; Voltage:161 mm; Determining Operating Characteristics:Contact with Flinger; Maximum Permissible Speed (limit Speed):Round; Control Pressure Measurement:0.866 in; Maximum Permissible Pilot Pressure:Standard Duty; Pilot Pressure:Lubrication Fitting; Maximum rotational speed:Two-Bolt Flange; Sequence Valve:UCFL200C4HR23; Power:Cast Iron; Pressurefree Operation:UC207C4HR23; Load Pressure:Set Screw; |
PV7 - Variable vane pumps, direct operated | Bosch Rexroth
PV7 direct operated pumps are a pressure compensated design that improves system performance and efficiency vs. fixed displacement pumps. PV7 pumps
Variable vane pumps, direct controlled | Bosch Rexroth AG
Hydraulic pumps of type PV7...A are direct operated vane pumps with adjustable displacement. For limitation of the maximum flow, the pump is equipped with a
Fixed displacement vane pumps | Bosch Rexroth AG
Hydraulic pumps of type PVH are vane pumps with constant displacement. By simply removing the cover, the pump insert can be removed without the need of
Vane pumps | Bosch Rexroth AG
Vane pumps are available in a wider range of sizes. They are used in applications requiring medium operating pressures and low noise emissions
Vane pumps | Bosch Rexroth AG
Easy to service due to exchangable pump cartridges; Within one frame size, the stroke volume can be changed by changing the installation kit; The pump can be
Vane pumps | Bosch Rexroth USA
Vane pumps are available in a wider range of sizes. They are used in applications requiring medium operating pressures and low noise emissions
Vane Pumps | Bosch Rexroth USA
Bosch vane pumps are designed to meet the requirements of the machine tool, general machinery, and other markets where low noise, high performance, and
Fixed displacement vane pumps | Bosch Rexroth AG
Hydraulic pumps of type PVQ are vane pumps with constant displacement in mobile version
Rexroth PVV4-1X/082LA15DMC Vane pump Video