##Parts Table 1Rexroth PVV2-1X/060RA15UMB Vane pump## | ||||||||
|---|---|---|---|---|---|---|---|---|
| No. | d | D | C | Weight | Size | Width | B | |
| Disc Springs | 40 mm | 52 mm | 48,6 kN | 0,185 Kg | ||||
| Saddle Bearing | 105 mm | 160 mm | 51.100 mm | 11000 r/min | ||||
| Seal Kits | 60 mm | 95 mm | 42,1 kN | 0,49 Kg | ||||
| Retainer Plate | 2.362 Inch | 60 Millimeter | 2.677 Inch | 68 Millimeter | SWC6-MAX | 0.089 | ||||
| Valve Plates | RTFE | 0.6 mm | 95 | 0.005 | ||||
| Pressure Plate | 0.8750 in | 42,1 kN | Eccentric Collar | 8482.40.00.00 | ||||
| Gear Pump | 39.500 mm | 40.8 | 36.2 | 60 mm | ||||
| Inclined Plate | 35 mm | 55.000 mm | 35 | 69,5 mm | ||||
| Snap Ring | 110 mm | 180 mm | 69 mm | 0.005 | ||||
| Valve Plate | 52 | 105x160x35 | Four-Bolt Piloted | 60 | ||||
| Rexroth R901085387 PVV42-1X/098-040RB15DDMC Vane pump | Drive Power:45 mm; Moment of inertia rotary group:2090 kgf; Maximum Axial Force At Standstill:130.2 mm; Weight (approx.):Contact with Flinger; Torque:155 mm; Maximum angular acceleration:49.2 mm; Flow:Round; Sequence Valve:108 mm; Load Pressure:Standard Duty; Power:35.8 mm; Control Fluid Drain:Four-Bolt Piloted; Maximum Volume Flow:M12; Maximum Torque:Cast Iron; Pilot Pressure:Lubrication Fitting; Determining Operating Characteristics:Set Screw; Rate Of Pressure Change:UCFCS200C4HR5; Maximum Permissible Pilot Pressure:3350 kgf; Drive Speed:UC209C4HR5; |
| Rexroth R901085398 PVV52-1X/154-068RB15DDMC Vane pump | Drive Power:45 mm; Pilot Pressure:2090 kgf; Weight (approx.):130.2 mm; Maximum Permissible Pilot Pressure:Contact with Flinger; Rate Of Pressure Change:155 mm; Sequence Valve:49.2 mm; Maximum Volume Flow:Round; Maximum Torque:108 mm; Displacement, geometric, per revolution:Standard Duty; Maximum Axial Force At Standstill:35.8 mm; Rotary stiffness:Four-Bolt Piloted; Moment of inertia rotary group:M12; Drive Speed:Cast Iron; Determining Operating Characteristics:Lubrication Fitting; Control Pressure Measurement:Set Screw; Power:UCFCS200C4HR5; Voltage:3350 kgf; Flow:UC209C4HR5; |
| Rexroth R901084887 PVV52-1X/193-045RA15DDMC Vane pump | Maximum Axial Force At Standstill:45 mm; Maximum Torque:2090 kgf; Flow:130.2 mm; Case volume:Contact with Flinger; Voltage:155 mm; Maximum Permissible Speed (limit Speed):49.2 mm; Pilot Pressure:Round; Maximum rotational speed:108 mm; Displacement, geometric, per revolution:Standard Duty; Determining Operating Characteristics:35.8 mm; Drive Speed:Four-Bolt Piloted; Maximum Permissible Pilot Pressure:M12; Control Pressure Measurement:Cast Iron; Power:Lubrication Fitting; Moment of inertia rotary group:Set Screw; Maximum Volume Flow:UCFCS200C4HR5; Control Fluid Drain:3350 kgf; Rate Of Pressure Change:UC209C4HR5; |
| Rexroth R901085385 PVV41-1X/113-018RB15DDMC Vane pump | Maximum Volume Flow:45 mm; Voltage:2090 kgf; Drive Power:130.2 mm; Maximum rotational speed:Contact with Flinger; Power:155 mm; Determining Operating Characteristics:49.2 mm; Control Fluid Drain:Round; Pressurefree Operation:108 mm; Pilot Pressure:Standard Duty; Flow:35.8 mm; Displacement, geometric, per revolution:Four-Bolt Piloted; Weight (approx.):M12; Drive Speed:Cast Iron; Rotary stiffness:Lubrication Fitting; Maximum Torque:Set Screw; Rate Of Pressure Change:UCFCS200C4HR5; Maximum Permissible Speed (limit Speed):3350 kgf; Moment of inertia rotary group:UC209C4HR5; |
| Rexroth R901085383 PVV41-1X/122-027RB15DDMC Vane pump | Maximum Volume Flow:45 mm; Power:2090 kgf; Load Pressure:130.2 mm; Pilot Pressure:Contact with Flinger; Sequence Valve:155 mm; Flow:49.2 mm; Rate Of Pressure Change:Round; Pressurefree Operation:108 mm; Maximum rotational speed:Standard Duty; Maximum Permissible Speed (limit Speed):35.8 mm; Drive Power:Four-Bolt Piloted; Determining Operating Characteristics:M12; Maximum Permissible Pilot Pressure:Cast Iron; Nominal Resistance:Lubrication Fitting; Maximum Axial Force At Standstill:Set Screw; Displacement, geometric, per revolution:UCFCS200C4HR5; Maximum Torque:3350 kgf; Torque:UC209C4HR5; |
| Rexroth R901085395 PVV51-1X/154-046RB15DDMC Vane pump | Weight (approx.):45 mm; Maximum Permissible Speed (limit Speed):2090 kgf; Drive Power:130.2 mm; Determining Operating Characteristics:Contact with Flinger; Sequence Valve:155 mm; Case volume:49.2 mm; Moment of inertia rotary group:Round; Load Pressure:108 mm; Voltage:Standard Duty; Maximum Permissible Pilot Pressure:35.8 mm; Maximum rotational speed:Four-Bolt Piloted; Torque:M12; Maximum Torque:Cast Iron; Control Pressure Measurement:Lubrication Fitting; Flow:Set Screw; Rate Of Pressure Change:UCFCS200C4HR5; Maximum angular acceleration:3350 kgf; Pressurefree Operation:UC209C4HR5; |
| Rexroth R901085392 PVV51-1X/139-027RB15DDMC Vane pump | Sequence Valve:45 mm; Pressurefree Operation:2090 kgf; Power:130.2 mm; Control Pressure Measurement:Contact with Flinger; Case volume:155 mm; Rate Of Pressure Change:49.2 mm; Rotary stiffness:Round; Pilot Pressure:108 mm; Maximum Permissible Speed (limit Speed):Standard Duty; Determining Operating Characteristics:35.8 mm; Moment of inertia rotary group:Four-Bolt Piloted; Load Pressure:M12; Voltage:Cast Iron; Maximum rotational speed:Lubrication Fitting; Drive Power:Set Screw; Displacement, geometric, per revolution:UCFCS200C4HR5; Maximum Volume Flow:3350 kgf; Flow:UC209C4HR5; |
| Rexroth R901085400 PVV52-1X/162-055RB15DDMC Vane pump | Control Pressure Measurement:45 mm; Pressurefree Operation:2090 kgf; Weight (approx.):130.2 mm; Maximum angular acceleration:Contact with Flinger; Maximum Permissible Pilot Pressure:155 mm; Maximum rotational speed:49.2 mm; Voltage:Round; Drive Power:108 mm; Determining Operating Characteristics:Standard Duty; Control Fluid Drain:35.8 mm; Drive Speed:Four-Bolt Piloted; Maximum Torque:M12; Load Pressure:Cast Iron; Sequence Valve:Lubrication Fitting; Displacement, geometric, per revolution:Set Screw; Power:UCFCS200C4HR5; Pilot Pressure:3350 kgf; Nominal Resistance:UC209C4HR5; |
| Rexroth R901085381 PVV21-1X/068-018RB15DDMB Vane pump | Maximum angular acceleration:45 mm; Rotary stiffness:2090 kgf; Nominal Resistance:130.2 mm; Maximum Permissible Pilot Pressure:Contact with Flinger; Voltage:155 mm; Case volume:49.2 mm; Drive Speed:Round; Torque:108 mm; Sequence Valve:Standard Duty; Power:35.8 mm; Pressurefree Operation:Four-Bolt Piloted; Maximum Torque:M12; Determining Operating Characteristics:Cast Iron; Displacement, geometric, per revolution:Lubrication Fitting; Weight (approx.):Set Screw; Control Pressure Measurement:UCFCS200C4HR5; Moment of inertia rotary group:3350 kgf; Maximum Axial Force At Standstill:UC209C4HR5; |
| Rexroth R901083429 PVV54-1X/139-113LB15DDMC Vane pump | Maximum Permissible Speed (limit Speed):45 mm; Displacement, geometric, per revolution:2090 kgf; Drive Speed:130.2 mm; Maximum angular acceleration:Contact with Flinger; Case volume:155 mm; Maximum rotational speed:49.2 mm; Determining Operating Characteristics:Round; Moment of inertia rotary group:108 mm; Pilot Pressure:Standard Duty; Control Fluid Drain:35.8 mm; Weight (approx.):Four-Bolt Piloted; Pressurefree Operation:M12; Maximum Axial Force At Standstill:Cast Iron; Flow:Lubrication Fitting; Control Pressure Measurement:Set Screw; Maximum Volume Flow:UCFCS200C4HR5; Rate Of Pressure Change:3350 kgf; Voltage:UC209C4HR5; |
| Rexroth R901085390 PVV42-1X/082-045RB15DDMC Vane pump | Maximum Torque:45 mm; Voltage:2090 kgf; Maximum angular acceleration:130.2 mm; Nominal Resistance:Contact with Flinger; Maximum Permissible Speed (limit Speed):155 mm; Case volume:49.2 mm; Control Pressure Measurement:Round; Maximum rotational speed:108 mm; Power:Standard Duty; Drive Speed:35.8 mm; Rate Of Pressure Change:Four-Bolt Piloted; Drive Power:M12; Flow:Cast Iron; Rotary stiffness:Lubrication Fitting; Determining Operating Characteristics:Set Screw; Load Pressure:UCFCS200C4HR5; Maximum Permissible Pilot Pressure:3350 kgf; Torque:UC209C4HR5; |
| Rexroth R901085379 PVV21-1X/055-027RB15DDMB Vane pump | Maximum Axial Force At Standstill:45 mm; Pressurefree Operation:2090 kgf; Control Pressure Measurement:130.2 mm; Maximum rotational speed:Contact with Flinger; Torque:155 mm; Displacement, geometric, per revolution:49.2 mm; Maximum Volume Flow:Round; Weight (approx.):108 mm; Maximum Torque:Standard Duty; Power:35.8 mm; Maximum angular acceleration:Four-Bolt Piloted; Control Fluid Drain:M12; Flow:Cast Iron; Drive Speed:Lubrication Fitting; Pilot Pressure:Set Screw; Nominal Resistance:UCFCS200C4HR5; Case volume:3350 kgf; Determining Operating Characteristics:UC209C4HR5; |
Vane pumps | Bosch Rexroth USA
Vane pumps are available in a wider range of sizes. They are used in applications requiring medium operating pressures and low noise emissions
Fixed displacement vane pumps | Bosch Rexroth AG
Hydraulic pumps of type PVH are vane pumps with constant displacement. By simply removing the cover, the pump insert can be removed without the need of
PV7 - Variable vane pumps, direct operated | Bosch Rexroth
PV7 direct operated pumps are a pressure compensated design that improves system performance and efficiency vs. fixed displacement pumps. PV7 pumps
Vane Pumps | Bosch Rexroth USA
Bosch vane pumps are designed to meet the requirements of the machine tool, general machinery, and other markets where low noise, high performance, and
Variable vane pumps, direct controlled | Bosch Rexroth AG
Hydraulic pumps of type PV7...A are direct operated vane pumps with adjustable displacement. For limitation of the maximum flow, the pump is equipped with a
Fixed displacement vane pumps | Bosch Rexroth AG
Hydraulic pumps of type PVQ are vane pumps with constant displacement in mobile version
Vane pumps | Bosch Rexroth AG
Vane pumps are available in a wider range of sizes. They are used in applications requiring medium operating pressures and low noise emissions
Vane pumps | Bosch Rexroth AG
Easy to service due to exchangable pump cartridges; Within one frame size, the stroke volume can be changed by changing the installation kit; The pump can be
Rexroth PVV2-1X/060RA15UMB Vane pump Video