##Parts Table 1Rexroth PVV2-1X/068RA15UMB Vane pump## | ||||||||
|---|---|---|---|---|---|---|---|---|
| No. | D | d | Weight | B | Diametro esterno | Minimum Buy Quantity | Inventory | |
| Seal Kits | 820 mm | 560 mm | 465 Kg | 258 mm | ||||
| Swing | 8,68 Kg | 45,3 mm | 0.118 | Lead Free | ||||
| Snap Ring | 3.937 Inch | 100 Millimeter | 2.559 Inch | 65 Millimeter | 0.515 | 0.709 Inch | 18 Millimeter | ||||
| Swash Plate | 1.378 Inch | 35.001 Millimeter | 1.003 Inch | 25.476 Millimeter | 0.128 | 3,5 mm | ||||
| Guide Ball | 120.00 KGS | C3 | 0.328 | Oil Impregnated Sintered Bronze | ||||
| Block Springs | +0.25 / 0 | 2 | 1.153 | 280mm | ||||
| Pressure Plate | 36000 | Glitron F | 13,7 kN | 200 mm | ||||
| Ball Guides | 460mm | 280mm | None | 180mm | ||||
| Back Plate | 74,612 mm | 51,054 mm | 50 | Ball Bearing | ||||
| Plunger Sliding Boots | 0.515 | 1.0 N/mm² x m/s | 481,95 r/min | 1.00 | ||||
| Servo Piston | 200,025 mm | 118 mm | 84833080 | 50 mm | ||||
| Set Plate | 0,6 mm | 77SH | 65MM Bore; 100MM Outside Diameter; 18MM Width; Open Enclosure; ABEC 3 | ISO P6 Precision; Steel Ball Material; 1 (Single) Bearing; 0 Degree Contact Angle; Bronze Cage Material; Ball Bearing | 3.000 | ||||
| Spacer | 62 mm | 40 mm | Oil Impregnated Sintered Bronze | 12 mm | ||||
| Regulator | Steel | 63.0 | SWC5-1640 | 51,054 | ||||
| Rexroth R901083429 PVV54-1X/139-113LB15DDMC Vane pump | Case volume:1.1875 in; Maximum rotational speed:2567 lb; Load Pressure:3.2500 in; Sequence Valve:Felt Seal; Torque:4.2500 in; Weight (approx.):1-9/16 in; Maximum Permissible Speed (limit Speed):Round; Flow:-20 to +220 °F; Nominal Resistance:Standard Duty; Rotary stiffness:Uncoated; Drive Speed:Four-Bolt Flange; Maximum Axial Force At Standstill:4300 RPM; Maximum Torque:Cast Iron; Drive Power:Lubrication Fitting; Maximum Volume Flow:Set Screw; Determining Operating Characteristics:SF; Pilot Pressure:Non-Expansion Bearing (Fixed); Rate Of Pressure Change:2-13; Maximum Permissible Pilot Pressure:4381 lb; |
| Rexroth R901085400 PVV52-1X/162-055RB15DDMC Vane pump | Determining Operating Characteristics:1.1875 in; Control Pressure Measurement:2567 lb; Sequence Valve:3.2500 in; Moment of inertia rotary group:Felt Seal; Drive Speed:4.2500 in; Power:1-9/16 in; Load Pressure:Round; Maximum rotational speed:-20 to +220 °F; Maximum Torque:Standard Duty; Case volume:Uncoated; Maximum Permissible Pilot Pressure:Four-Bolt Flange; Maximum Axial Force At Standstill:4300 RPM; Maximum Permissible Speed (limit Speed):Cast Iron; Maximum Volume Flow:Lubrication Fitting; Flow:Set Screw; Maximum angular acceleration:SF; Nominal Resistance:Non-Expansion Bearing (Fixed); Rotary stiffness:2-13; Rate Of Pressure Change:4381 lb; |
| Rexroth R901085392 PVV51-1X/139-027RB15DDMC Vane pump | Drive Power:1.1875 in; Flow:2567 lb; Nominal Resistance:3.2500 in; Maximum rotational speed:Felt Seal; Control Pressure Measurement:4.2500 in; Voltage:1-9/16 in; Displacement, geometric, per revolution:Round; Power:-20 to +220 °F; Rate Of Pressure Change:Standard Duty; Sequence Valve:Uncoated; Pressurefree Operation:Four-Bolt Flange; Maximum Axial Force At Standstill:4300 RPM; Case volume:Cast Iron; Control Fluid Drain:Lubrication Fitting; Pilot Pressure:Set Screw; Drive Speed:SF; Maximum Torque:Non-Expansion Bearing (Fixed); Moment of inertia rotary group:2-13; Maximum Permissible Speed (limit Speed):4381 lb; |
| Rexroth R901085381 PVV21-1X/068-018RB15DDMB Vane pump | Determining Operating Characteristics:1.1875 in; Maximum Permissible Speed (limit Speed):2567 lb; Pilot Pressure:3.2500 in; Maximum Volume Flow:Felt Seal; Moment of inertia rotary group:4.2500 in; Maximum Axial Force At Standstill:1-9/16 in; Voltage:Round; Flow:-20 to +220 °F; Rotary stiffness:Standard Duty; Nominal Resistance:Uncoated; Drive Speed:Four-Bolt Flange; Rate Of Pressure Change:4300 RPM; Maximum angular acceleration:Cast Iron; Sequence Valve:Lubrication Fitting; Maximum Torque:Set Screw; Maximum rotational speed:SF; Displacement, geometric, per revolution:Non-Expansion Bearing (Fixed); Load Pressure:2-13; Control Pressure Measurement:4381 lb; |
| Rexroth R901085385 PVV41-1X/113-018RB15DDMC Vane pump | Sequence Valve:1.1875 in; Nominal Resistance:2567 lb; Rotary stiffness:3.2500 in; Maximum rotational speed:Felt Seal; Maximum Permissible Pilot Pressure:4.2500 in; Load Pressure:1-9/16 in; Case volume:Round; Maximum Axial Force At Standstill:-20 to +220 °F; Pilot Pressure:Standard Duty; Control Fluid Drain:Uncoated; Flow:Four-Bolt Flange; Control Pressure Measurement:4300 RPM; Maximum Permissible Speed (limit Speed):Cast Iron; Power:Lubrication Fitting; Torque:Set Screw; Maximum Volume Flow:SF; Pressurefree Operation:Non-Expansion Bearing (Fixed); Weight (approx.):2-13; Maximum Torque:4381 lb; |
| Rexroth R901085387 PVV42-1X/098-040RB15DDMC Vane pump | Rotary stiffness:1.1875 in; Pilot Pressure:2567 lb; Maximum rotational speed:3.2500 in; Rate Of Pressure Change:Felt Seal; Flow:4.2500 in; Determining Operating Characteristics:1-9/16 in; Maximum Axial Force At Standstill:Round; Pressurefree Operation:-20 to +220 °F; Maximum Torque:Standard Duty; Case volume:Uncoated; Drive Speed:Four-Bolt Flange; Moment of inertia rotary group:4300 RPM; Control Pressure Measurement:Cast Iron; Maximum angular acceleration:Lubrication Fitting; Sequence Valve:Set Screw; Control Fluid Drain:SF; Maximum Permissible Speed (limit Speed):Non-Expansion Bearing (Fixed); Displacement, geometric, per revolution:2-13; Voltage:4381 lb; |
| Rexroth R901085398 PVV52-1X/154-068RB15DDMC Vane pump | Flow:1.1875 in; Pressurefree Operation:2567 lb; Displacement, geometric, per revolution:3.2500 in; Nominal Resistance:Felt Seal; Maximum Torque:4.2500 in; Control Pressure Measurement:1-9/16 in; Maximum Volume Flow:Round; Maximum Permissible Speed (limit Speed):-20 to +220 °F; Determining Operating Characteristics:Standard Duty; Case volume:Uncoated; Torque:Four-Bolt Flange; Pilot Pressure:4300 RPM; Maximum Axial Force At Standstill:Cast Iron; Control Fluid Drain:Lubrication Fitting; Power:Set Screw; Voltage:SF; Drive Speed:Non-Expansion Bearing (Fixed); Rate Of Pressure Change:2-13; Rotary stiffness:4381 lb; |
| Rexroth R901085379 PVV21-1X/055-027RB15DDMB Vane pump | Case volume:1.1875 in; Pressurefree Operation:2567 lb; Control Fluid Drain:3.2500 in; Weight (approx.):Felt Seal; Power:4.2500 in; Control Pressure Measurement:1-9/16 in; Moment of inertia rotary group:Round; Maximum Volume Flow:-20 to +220 °F; Torque:Standard Duty; Pilot Pressure:Uncoated; Maximum Permissible Pilot Pressure:Four-Bolt Flange; Displacement, geometric, per revolution:4300 RPM; Flow:Cast Iron; Maximum rotational speed:Lubrication Fitting; Voltage:Set Screw; Rotary stiffness:SF; Drive Speed:Non-Expansion Bearing (Fixed); Nominal Resistance:2-13; Sequence Valve:4381 lb; |
| Rexroth R901085390 PVV42-1X/082-045RB15DDMC Vane pump | Maximum angular acceleration:1.1875 in; Pressurefree Operation:2567 lb; Sequence Valve:3.2500 in; Weight (approx.):Felt Seal; Case volume:4.2500 in; Torque:1-9/16 in; Displacement, geometric, per revolution:Round; Drive Speed:-20 to +220 °F; Control Pressure Measurement:Standard Duty; Moment of inertia rotary group:Uncoated; Maximum Torque:Four-Bolt Flange; Nominal Resistance:4300 RPM; Rotary stiffness:Cast Iron; Power:Lubrication Fitting; Drive Power:Set Screw; Maximum Permissible Speed (limit Speed):SF; Maximum Axial Force At Standstill:Non-Expansion Bearing (Fixed); Maximum Volume Flow:2-13; Maximum rotational speed:4381 lb; |
| Rexroth R901084887 PVV52-1X/193-045RA15DDMC Vane pump | Pilot Pressure:1.1875 in; Control Pressure Measurement:2567 lb; Maximum Permissible Speed (limit Speed):3.2500 in; Maximum Permissible Pilot Pressure:Felt Seal; Torque:4.2500 in; Load Pressure:1-9/16 in; Maximum Volume Flow:Round; Weight (approx.):-20 to +220 °F; Power:Standard Duty; Determining Operating Characteristics:Uncoated; Pressurefree Operation:Four-Bolt Flange; Control Fluid Drain:4300 RPM; Moment of inertia rotary group:Cast Iron; Case volume:Lubrication Fitting; Flow:Set Screw; Rotary stiffness:SF; Rate Of Pressure Change:Non-Expansion Bearing (Fixed); Displacement, geometric, per revolution:2-13; Maximum rotational speed:4381 lb; |
| Rexroth R901085383 PVV41-1X/122-027RB15DDMC Vane pump | Determining Operating Characteristics:1.1875 in; Maximum rotational speed:2567 lb; Maximum Permissible Pilot Pressure:3.2500 in; Power:Felt Seal; Voltage:4.2500 in; Moment of inertia rotary group:1-9/16 in; Nominal Resistance:Round; Maximum Permissible Speed (limit Speed):-20 to +220 °F; Control Pressure Measurement:Standard Duty; Maximum Volume Flow:Uncoated; Drive Speed:Four-Bolt Flange; Maximum Torque:4300 RPM; Pilot Pressure:Cast Iron; Maximum Axial Force At Standstill:Lubrication Fitting; Control Fluid Drain:Set Screw; Case volume:SF; Displacement, geometric, per revolution:Non-Expansion Bearing (Fixed); Flow:2-13; Rotary stiffness:4381 lb; |
| Rexroth R901085395 PVV51-1X/154-046RB15DDMC Vane pump | Drive Power:1.1875 in; Maximum angular acceleration:2567 lb; Maximum Axial Force At Standstill:3.2500 in; Voltage:Felt Seal; Nominal Resistance:4.2500 in; Torque:1-9/16 in; Pilot Pressure:Round; Pressurefree Operation:-20 to +220 °F; Drive Speed:Standard Duty; Power:Uncoated; Maximum Torque:Four-Bolt Flange; Control Pressure Measurement:4300 RPM; Maximum Permissible Speed (limit Speed):Cast Iron; Maximum rotational speed:Lubrication Fitting; Load Pressure:Set Screw; Moment of inertia rotary group:SF; Case volume:Non-Expansion Bearing (Fixed); Determining Operating Characteristics:2-13; Displacement, geometric, per revolution:4381 lb; |
Vane pumps | Bosch Rexroth USA
Vane pumps are available in a wider range of sizes. They are used in applications requiring medium operating pressures and low noise emissions
Fixed displacement vane pumps | Bosch Rexroth AG
Hydraulic pumps of type PVQ are vane pumps with constant displacement in mobile version
Vane pumps | Bosch Rexroth AG
Vane pumps are available in a wider range of sizes. They are used in applications requiring medium operating pressures and low noise emissions
Variable vane pumps, direct controlled | Bosch Rexroth AG
Hydraulic pumps of type PV7...A are direct operated vane pumps with adjustable displacement. For limitation of the maximum flow, the pump is equipped with a
Fixed displacement vane pumps | Bosch Rexroth AG
Hydraulic pumps of type PVH are vane pumps with constant displacement. By simply removing the cover, the pump insert can be removed without the need of
Vane pumps | Bosch Rexroth AG
Easy to service due to exchangable pump cartridges; Within one frame size, the stroke volume can be changed by changing the installation kit; The pump can be
Vane Pumps | Bosch Rexroth USA
Bosch vane pumps are designed to meet the requirements of the machine tool, general machinery, and other markets where low noise, high performance, and
PV7 - Variable vane pumps, direct operated | Bosch Rexroth
PV7 direct operated pumps are a pressure compensated design that improves system performance and efficiency vs. fixed displacement pumps. PV7 pumps
Rexroth PVV2-1X/068RA15UMB Vane pump Video