##Parts Table 1Danfoss Shut-off valves 148B4661 STC 100 M ANG SHUT-OFF VALVE HANDWHEEL## |
|---|
| No. | d | D | Weight | Inventory | B | Minimum Buy Quantity | UNSPSC |
| Back Plate | 45 mm | 85 mm | 82.74 | 28 mm |
| Plunger Sliding Boots | 28 mm | 58 mm | 0.175 Kg | 5.33 |
| Ball Guides | 3.937 Inch | 100 Millimeter | 5.94 Inch | 150.876 Millimeter | 25.878 | 0.0 |
| Swing | 4.438 Inch | 112.725 Millimeter | 5.53 Inch | 140.462 Millimeter | 32.688 | 0.0 |
| Skeleton Oil Seal | 6.5 Inch | 165.1 Millimeter | 0 Inch | 0 Millimeter | 34.21 | 0.0 |
| Oil Distribution Disc Plug | 3.346 Inch | 85 Millimeter | 7.087 Inch | 180 Millimeter | 5.33 | 0.0 |
| Disc Springs | 0.375 Inch | 9.525 Millimeter | Spherical Plain | 0.068 | 0.0 |
| Valve Plate | http://www.nachi.com | 9,750 N | - | 0.0 |
| Spacer | 2 Seals | 31171511 | - | 0.0 |
| Cylinder Blocks | 0.5 Inch | 12.7 Millimeter | 1.375 Inch | 34.925 Millimeter | 0.05 | 0.0 |
| Cylinder | 180 mm | 280 mm | 22.700 kg | 3.03 |
| Drive Shaft | 320 mm | 580 mm | 2.1 mm | 9,75 kN |
| Cylinder Block | 20 mm | 32 mm | 208 | Eccentric Collar |
| The Ball Hinge Spring | 101.6 | Large and Small Ribs | Close Guided Roller | Yes | Bearing |
| Danfoss Shut-off valves 148B4639 STC 100 A STR SHUT-OFF VALVE HANDWHEEL | Maximum Torque:Tapped Base; Maximum angular acceleration:30 to 180 °F; Power:1.2500 in; Drive Power:3.0000 in; Load Pressure:Round; Control Pressure Measurement:2900 rpm; Moment of inertia rotary group:1.6875 in; Pilot Pressure:7/16 in; Flow:Normal Duty; Nominal Resistance:7/16-24; Determining Operating Characteristics:Nolu-Clean; Maximum Permissible Speed (limit Speed):Lubrication Fitting; Sequence Valve:Set Screw; Rate Of Pressure Change:UCPA; Weight (approx.):Single Lip Contact; Displacement, geometric, per revolution:Yellow Protective Cap; Maximum Axial Force At Standstill:Non-Expansion Bearing (Fixed); Voltage:Open End Cap; Maximum Volume Flow:3.8594 in; Drive Speed:52100 Chrome Bearing Steel; Maximum Permissible Pilot Pressure:3.3438 in; Pressurefree Operation:780206CGAR-U; Torque:Nolu-Clean; Rotary stiffness:726166493004; Maximum rotational speed:2.4063 in; Weight:1.15 lbs; maximum operating temperature:Max 180 °; |
| Danfoss Shut-off valves 148B4636 STC 80 A STR SHUT-OFF VALVE CAP | Control Fluid Drain:Tapped Base; Rotary stiffness:30 to 180 °F; Pressurefree Operation:1.2500 in; Nominal Resistance:3.0000 in; Moment of inertia rotary group:Round; Pilot Pressure:2900 rpm; Maximum Permissible Pilot Pressure:1.6875 in; Sequence Valve:7/16 in; Control Pressure Measurement:Normal Duty; Flow:7/16-24; Rate Of Pressure Change:Nolu-Clean; Power:Lubrication Fitting; Maximum Axial Force At Standstill:Set Screw; Voltage:UCPA; Displacement, geometric, per revolution:Single Lip Contact; Weight (approx.):Yellow Protective Cap; Maximum angular acceleration:Non-Expansion Bearing (Fixed); Maximum rotational speed:Open End Cap; Maximum Permissible Speed (limit Speed):3.8594 in; Drive Power:52100 Chrome Bearing Steel; Drive Speed:3.3438 in; Case volume:780206CGAR-U; Maximum Torque:Nolu-Clean; Load Pressure:726166493004; Determining Operating Characteristics:2.4063 in; Weight:1.15 lbs; maximum operating temperature:Max 180 °; |
| Danfoss Shut-off valves 148B4634 STC 65 A STR SHUT-OFF VALVE CAP | Determining Operating Characteristics:Tapped Base; Maximum Axial Force At Standstill:30 to 180 °F; Case volume:1.2500 in; Rotary stiffness:3.0000 in; Pilot Pressure:Round; Maximum angular acceleration:2900 rpm; Control Fluid Drain:1.6875 in; Nominal Resistance:7/16 in; Pressurefree Operation:Normal Duty; Drive Speed:7/16-24; Voltage:Nolu-Clean; Rate Of Pressure Change:Lubrication Fitting; Load Pressure:Set Screw; Torque:UCPA; Weight (approx.):Single Lip Contact; Moment of inertia rotary group:Yellow Protective Cap; Maximum Permissible Speed (limit Speed):Non-Expansion Bearing (Fixed); Drive Power:Open End Cap; Power:3.8594 in; Maximum Volume Flow:52100 Chrome Bearing Steel; Displacement, geometric, per revolution:3.3438 in; Sequence Valve:780206CGAR-U; Maximum rotational speed:Nolu-Clean; Maximum Permissible Pilot Pressure:726166493004; Maximum Torque:2.4063 in; Weight:1.15 lbs; maximum operating temperature:Max 180 °; |
| Danfoss Shut-off valves 148B4643 STC 150 A STR SHUT-OFF VALVE HANDWHEEL | Maximum Torque:Tapped Base; Drive Power:30 to 180 °F; Sequence Valve:1.2500 in; Maximum Axial Force At Standstill:3.0000 in; Maximum angular acceleration:Round; Load Pressure:2900 rpm; Maximum rotational speed:1.6875 in; Voltage:7/16 in; Displacement, geometric, per revolution:Normal Duty; Moment of inertia rotary group:7/16-24; Case volume:Nolu-Clean; Torque:Lubrication Fitting; Maximum Permissible Pilot Pressure:Set Screw; Drive Speed:UCPA; Determining Operating Characteristics:Single Lip Contact; Maximum Volume Flow:Yellow Protective Cap; Control Pressure Measurement:Non-Expansion Bearing (Fixed); Pressurefree Operation:Open End Cap; Nominal Resistance:3.8594 in; Maximum Permissible Speed (limit Speed):52100 Chrome Bearing Steel; Control Fluid Drain:3.3438 in; Rotary stiffness:780206CGAR-U; Pilot Pressure:Nolu-Clean; Weight (approx.):726166493004; Power:2.4063 in; Weight:1.15 lbs; maximum operating temperature:Max 180 °; |
| Danfoss Shut-off valves 148B4632 STC 50 A STR SHUT-OFF VALVE CAP | Maximum Volume Flow:Tapped Base; Drive Speed:30 to 180 °F; Rate Of Pressure Change:1.2500 in; Control Pressure Measurement:3.0000 in; Power:Round; Maximum angular acceleration:2900 rpm; Weight (approx.):1.6875 in; Pressurefree Operation:7/16 in; Maximum rotational speed:Normal Duty; Nominal Resistance:7/16-24; Control Fluid Drain:Nolu-Clean; Drive Power:Lubrication Fitting; Pilot Pressure:Set Screw; Sequence Valve:UCPA; Rotary stiffness:Single Lip Contact; Maximum Axial Force At Standstill:Yellow Protective Cap; Flow:Non-Expansion Bearing (Fixed); Maximum Torque:Open End Cap; Maximum Permissible Pilot Pressure:3.8594 in; Moment of inertia rotary group:52100 Chrome Bearing Steel; Case volume:3.3438 in; Voltage:780206CGAR-U; Load Pressure:Nolu-Clean; Torque:726166493004; Displacement, geometric, per revolution:2.4063 in; Weight:1.15 lbs; maximum operating temperature:Max 180 °; |
| Danfoss Shut-off valves 148B4635 STC 65 A STR SHUT-OFF VALVE HANDWHEEL | Voltage:Tapped Base; Case volume:30 to 180 °F; Determining Operating Characteristics:1.2500 in; Moment of inertia rotary group:3.0000 in; Maximum rotational speed:Round; Power:2900 rpm; Control Fluid Drain:1.6875 in; Sequence Valve:7/16 in; Maximum Permissible Pilot Pressure:Normal Duty; Nominal Resistance:7/16-24; Pressurefree Operation:Nolu-Clean; Drive Power:Lubrication Fitting; Maximum Volume Flow:Set Screw; Torque:UCPA; Maximum Torque:Single Lip Contact; Pilot Pressure:Yellow Protective Cap; Maximum Axial Force At Standstill:Non-Expansion Bearing (Fixed); Drive Speed:Open End Cap; Control Pressure Measurement:3.8594 in; Maximum angular acceleration:52100 Chrome Bearing Steel; Maximum Permissible Speed (limit Speed):3.3438 in; Weight (approx.):780206CGAR-U; Load Pressure:Nolu-Clean; Flow:726166493004; Displacement, geometric, per revolution:2.4063 in; Weight:1.15 lbs; maximum operating temperature:Max 180 °; |
| Danfoss Shut-off valves 148B4637 STC 80 A STR SHUT-OFF VALVE HANDWHEEL | Rotary stiffness:Tapped Base; Torque:30 to 180 °F; Maximum angular acceleration:1.2500 in; Nominal Resistance:3.0000 in; Maximum Axial Force At Standstill:Round; Pressurefree Operation:2900 rpm; Power:1.6875 in; Weight (approx.):7/16 in; Flow:Normal Duty; Maximum rotational speed:7/16-24; Moment of inertia rotary group:Nolu-Clean; Pilot Pressure:Lubrication Fitting; Control Fluid Drain:Set Screw; Displacement, geometric, per revolution:UCPA; Load Pressure:Single Lip Contact; Voltage:Yellow Protective Cap; Maximum Torque:Non-Expansion Bearing (Fixed); Determining Operating Characteristics:Open End Cap; Maximum Permissible Speed (limit Speed):3.8594 in; Sequence Valve:52100 Chrome Bearing Steel; Rate Of Pressure Change:3.3438 in; Maximum Permissible Pilot Pressure:780206CGAR-U; Control Pressure Measurement:Nolu-Clean; Drive Speed:726166493004; Maximum Volume Flow:2.4063 in; Weight:1.15 lbs; maximum operating temperature:Max 180 °; |
| Danfoss Shut-off valves 148B4638 STC 100 A STR SHUT-OFF VALVE CAP | Sequence Valve:Tapped Base; Drive Speed:30 to 180 °F; Drive Power:1.2500 in; Rate Of Pressure Change:3.0000 in; Nominal Resistance:Round; Maximum angular acceleration:2900 rpm; Maximum Permissible Speed (limit Speed):1.6875 in; Determining Operating Characteristics:7/16 in; Pressurefree Operation:Normal Duty; Rotary stiffness:7/16-24; Load Pressure:Nolu-Clean; Voltage:Lubrication Fitting; Case volume:Set Screw; Power:UCPA; Maximum Torque:Single Lip Contact; Moment of inertia rotary group:Yellow Protective Cap; Maximum rotational speed:Non-Expansion Bearing (Fixed); Displacement, geometric, per revolution:Open End Cap; Torque:3.8594 in; Control Pressure Measurement:52100 Chrome Bearing Steel; Maximum Axial Force At Standstill:3.3438 in; Weight (approx.):780206CGAR-U; Control Fluid Drain:Nolu-Clean; Pilot Pressure:726166493004; Maximum Volume Flow:2.4063 in; Weight:1.15 lbs; maximum operating temperature:Max 180 °; |
| Danfoss Shut-off valves 148B4640 STC 125 A STR SHUT-OFF VALVE CAP | Drive Speed:Tapped Base; Voltage:30 to 180 °F; Maximum Permissible Pilot Pressure:1.2500 in; Pilot Pressure:3.0000 in; Pressurefree Operation:Round; Power:2900 rpm; Weight (approx.):1.6875 in; Drive Power:7/16 in; Rate Of Pressure Change:Normal Duty; Nominal Resistance:7/16-24; Rotary stiffness:Nolu-Clean; Maximum Permissible Speed (limit Speed):Lubrication Fitting; Torque:Set Screw; Maximum rotational speed:UCPA; Control Fluid Drain:Single Lip Contact; Displacement, geometric, per revolution:Yellow Protective Cap; Control Pressure Measurement:Non-Expansion Bearing (Fixed); Moment of inertia rotary group:Open End Cap; Sequence Valve:3.8594 in; Maximum Axial Force At Standstill:52100 Chrome Bearing Steel; Determining Operating Characteristics:3.3438 in; Maximum Torque:780206CGAR-U; Flow:Nolu-Clean; Load Pressure:726166493004; Case volume:2.4063 in; Weight:1.15 lbs; maximum operating temperature:Max 180 °; |
| Danfoss Shut-off valves 148B4633 STC 50 A STR SHUT-OFF VALVE HANDWHEEL | Case volume:Tapped Base; Drive Speed:30 to 180 °F; Maximum Permissible Speed (limit Speed):1.2500 in; Load Pressure:3.0000 in; Sequence Valve:Round; Maximum Axial Force At Standstill:2900 rpm; Power:1.6875 in; Moment of inertia rotary group:7/16 in; Flow:Normal Duty; Pilot Pressure:7/16-24; Rotary stiffness:Nolu-Clean; Control Pressure Measurement:Lubrication Fitting; Maximum rotational speed:Set Screw; Maximum angular acceleration:UCPA; Rate Of Pressure Change:Single Lip Contact; Pressurefree Operation:Yellow Protective Cap; Displacement, geometric, per revolution:Non-Expansion Bearing (Fixed); Nominal Resistance:Open End Cap; Maximum Torque:3.8594 in; Maximum Permissible Pilot Pressure:52100 Chrome Bearing Steel; Control Fluid Drain:3.3438 in; Drive Power:780206CGAR-U; Voltage:Nolu-Clean; Determining Operating Characteristics:726166493004; Maximum Volume Flow:2.4063 in; Weight:1.15 lbs; maximum operating temperature:Max 180 °; |
| Danfoss Shut-off valves 148B4642 STC 150 A STR SHUT-OFF VALVE CAP | Maximum Permissible Pilot Pressure:Tapped Base; Maximum Torque:30 to 180 °F; Rotary stiffness:1.2500 in; Maximum rotational speed:3.0000 in; Rate Of Pressure Change:Round; Sequence Valve:2900 rpm; Torque:1.6875 in; Load Pressure:7/16 in; Power:Normal Duty; Maximum Axial Force At Standstill:7/16-24; Pressurefree Operation:Nolu-Clean; Moment of inertia rotary group:Lubrication Fitting; Weight (approx.):Set Screw; Case volume:UCPA; Drive Speed:Single Lip Contact; Drive Power:Yellow Protective Cap; Determining Operating Characteristics:Non-Expansion Bearing (Fixed); Control Pressure Measurement:Open End Cap; Flow:3.8594 in; Control Fluid Drain:52100 Chrome Bearing Steel; Displacement, geometric, per revolution:3.3438 in; Maximum Permissible Speed (limit Speed):780206CGAR-U; Nominal Resistance:Nolu-Clean; Pilot Pressure:726166493004; Voltage:2.4063 in; Weight:1.15 lbs; maximum operating temperature:Max 180 °; |
| Danfoss Shut-off valves 148B4641 STC 125 A STR SHUT-OFF VALVE HANDWHEEL | Control Fluid Drain:Tapped Base; Determining Operating Characteristics:30 to 180 °F; Nominal Resistance:1.2500 in; Rate Of Pressure Change:3.0000 in; Power:Round; Voltage:2900 rpm; Displacement, geometric, per revolution:1.6875 in; Flow:7/16 in; Moment of inertia rotary group:Normal Duty; Maximum Torque:7/16-24; Drive Speed:Nolu-Clean; Maximum Permissible Speed (limit Speed):Lubrication Fitting; Rotary stiffness:Set Screw; Control Pressure Measurement:UCPA; Sequence Valve:Single Lip Contact; Drive Power:Yellow Protective Cap; Maximum rotational speed:Non-Expansion Bearing (Fixed); Weight (approx.):Open End Cap; Maximum Volume Flow:3.8594 in; Load Pressure:52100 Chrome Bearing Steel; Case volume:3.3438 in; Pilot Pressure:780206CGAR-U; Maximum Permissible Pilot Pressure:Nolu-Clean; Maximum angular acceleration:726166493004; Maximum Axial Force At Standstill:2.4063 in; Weight:1.15 lbs; maximum operating temperature:Max 180 °; |